···
Log in / Register

What is the battery model specification for the Buick GL8?

1 Answers
StJace
07/28/25 6:51pm

80D26R12V70A is the battery model specification for the Buick GL8. The battery is an important component of a car. When the engine is not started, the battery supplies power to all electronic devices in the vehicle. After the engine is started, the generator powers all electronic devices and can also charge the battery. The battery is responsible for starting the engine. During engine startup, the ignition system, fuel supply system, and starter all require power, which depends on the battery. The battery is a wearable part that needs regular replacement. Generally, a battery can last 3 to 4 years, but many car batteries fail before reaching this lifespan due to improper usage habits by the owner. When the engine is not running, avoid sitting in the car for extended periods while using electronic devices, as this can reduce the battery's lifespan. During each maintenance check, have a technician use professional equipment to test the battery's internal resistance and voltage. If these values do not meet the standard, it indicates that the battery needs replacement. If the car is not used for a long time, disconnect the negative terminal of the battery to prevent it from being in a discharged state. A battery left in a discharged state for too long will have its lifespan shortened.

Was this review help?
3
5
Share
More Forum Discussions

What do T and L mean on a car?

L refers to the displacement of the car engine. T refers to turbocharging. The following are the differences between L and T in cars: 1. Different engines: T is the abbreviation of turbo, meaning turbocharged engine; L is the unit of displacement in liters, referring to a naturally aspirated engine. 2. Different fuel requirements: T-displacement engines require turbocharging and need more fuel for pressurization; L-displacement engines do not require additional fuel for pressurization. 3. Different failure rates: T-displacement cars experience more severe engine wear due to the turbocharging in turbocharged engines; L-displacement engines do not require turbocharging, resulting in less wear.
17
3
Share

Is the wheel hub usually not replaced when changing tires?

When changing tires, if the tire size remains the same, there is no need to replace the wheel hub. Below is relevant information about automotive tires: 1. Definition of tires: Automotive tires are one of the important components of a vehicle. They directly contact the road surface and, together with the vehicle suspension, help to mitigate the shocks encountered during driving, ensuring good ride comfort and smooth driving performance. They also ensure good adhesion between the wheels and the road surface, improving the vehicle's traction, braking, and off-road capabilities. 2. Effects of low tire pressure: Tire pressure is crucial to tire longevity, as both too high and too low pressure can shorten its service life. Low pressure increases tire body deformation, making the tire sidewalls prone to cracks and causing flexing movements, which leads to excessive heat generation, accelerating rubber aging, fatigue of the cord layers, and cord breakage. Low pressure also increases the tire's contact area with the ground, accelerating wear on the tire shoulders. 3. Effects of high tire pressure: Excessive tire pressure causes the tire cords to undergo excessive stretching and deformation, reducing the tire body's elasticity. This increases the load on the vehicle during driving, and impacts can lead to internal cracks and blowouts. Additionally, high pressure accelerates wear on the tire tread and reduces its resistance to punctures.
11
2
Share

What is the best tire repair method?

The best tire repair method is the cold patch method. Below are introductions to related tire repair methods: 1. Plugging with rubber strips: This is the quickest and most convenient tire repair method. It involves directly inserting a rubber strip with a nail to seal the leak, allowing the tire to be used normally in a short time. 2. Cold patch: The cold patch method involves thinning the inner side of the tire's leak hole. Then, a special adhesive strip is applied and repeatedly pressed to restore the tire to normal use. 3. Mushroom plug repair: The mushroom plug is made of special materials. Its properties are very similar to rubber. It is nailed into the leak hole on the inner side of the tire and then polished.
5
1
Share

Why is the car remote control not responding?

Car remote control not responding may be due to the remote key battery being dead or poor contact. Below is a detailed introduction to the reasons why the car remote control is not responding: 1. Remote key battery is dead: If the remote control indicator light does not light up or is very dim when pressing the button, it may be due to insufficient battery power in the remote control. 2. Poor contact: During the use of the remote control, if it is used in places with strong magnetic fields, it is very likely that there is poor signal contact. For example, high-voltage lines, transmission towers, etc., so try to avoid parking the vehicle in these areas with strong magnetic fields.
13
2
Share

What does the right side narrow sign look like?

Right side narrow sign is a warning sign, a yellow triangle with a vertical line on the left side and a curve on the right side, the distance between the curve and the straight line is narrow at the top and wide at the bottom. The following is the relevant extended information about the right side narrow sign: 1. The meaning of the right side narrow sign: Warning signs are signs that warn vehicles and pedestrians to pay attention to dangerous places. The color of the warning sign is yellow background, black border, black pattern, and the shape is an equilateral triangle with the top angle upward. 2. The function of the right side narrow sign: The right side narrow sign is a warning, and vehicles should slow down and give way when encountering oncoming traffic. It is set at the starting point of a section where the width of the two-lane road is reduced to less than 600mm in front.
20
5
Share

What are the reasons for the high fuel consumption of the eighth-generation Civic?

The reasons and solutions for the high fuel consumption of the eighth-generation Civic are: 1. When there is excessive carbon buildup in the engine: Drive the car to a 4S shop and have professional technicians clean the carbon deposits inside the engine. Alternatively, driving more on highways can help reduce carbon buildup, allowing the engine to maintain better power output and significantly lower fuel consumption. 2. When the oxygen sensor is damaged: It may cause an imbalance in the fuel-air mixture, leading to a sudden increase in fuel consumption. Simply replace the faulty oxygen sensor. 3. Blockages in components such as the air filter, fuel filter, and oil filter: These can cause incomplete combustion of fuel, increasing carbon buildup in the engine. Regular cleaning or replacement of the filters is recommended.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.