What is the battery model of Zotye T600?

2 Answers
VonAdeline
07/24/25 10:03pm
The battery model of Zotye T600 is 55D23L. The model 55D23L is a standard Japanese battery specification, where 55 represents the ampere-hour rating of the battery, D indicates the width*height dimensions of the battery (D stands for a width of 17.3 cm and a height of 20.2 cm), 23 denotes the front length of the battery at 23 cm, and L signifies that the positive terminal is on the left. Zotye T600 is the first mid-size SUV model under the Zotye brand. The vehicle is equipped with 1.5T and 2.0T engines. The 1.5T version is paired with a 5-speed manual transmission, while the 2.0T version comes with either a 5-speed manual or a 6-speed dual-clutch (DCT) transmission, offering two-wheel-drive variants. The Zotye T600 1.5T flagship model is powered by a 1.5L turbocharged engine, delivering a maximum power of 119kW and a peak torque of 215N·m, matched with a 5-speed manual transmission. Maintenance measures and precautions for automotive batteries are as follows: Always keep the battery clean and dry, and ensure the vents are open. When oxides appear on the terminals or clamps, wipe them clean and apply a small amount of grease to prevent corrosion. Avoid continuous use of the starter; each use should not exceed 5 seconds, with a 10~15-second interval between two consecutive starts. The battery's discharge level should not exceed 25% in severe winter or 50% in summer. A battery with sufficient electrolyte should not be left undercharged for extended periods. Regular charging is necessary; otherwise, it may become unusable. When charging the battery, the voltage should not be too low or too high. Generally, the standard charging voltage for a 12V battery ranges between (13.5~14.5)V, and for a 24V battery, it ranges between (28~29.9)V. The electrolyte level should be (10~15)mm above the plates. If the level is too low, promptly add distilled water. Do not add electrolyte. Rainwater and snow water cannot replace distilled water. Avoid using river water or tap water.
Was this review help?
10
0
Share
AlexanderRose
08/10/25 2:52pm
Hey, I'm a Zotye T600 owner. The original battery model of my car is 6-QW-60 with a capacity of 60 ampere-hours. It starts quickly and stably after long-term use. The battery is located in the right corner under the hood, and you can find the label with clear specifications when you open the cover. When replacing it, I chose the Varta brand, which is affordable and durable. Remember to check the voltage every year to avoid being in a rush when it fails to start in the cold winter. Mismatched models can damage the starter and even trigger the system warning light. Last year, I didn’t pay attention when replacing it and ended up losing dozens of dollars to redo it. I recommend buying genuine products for peace of mind, cost savings, and safety. The battery life is generally three to four years, and regular maintenance can extend it.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

How many kilometers should the Santana timing belt be replaced?

The Santana timing belt should be replaced every 60,000 to 80,000 kilometers. The timing belt is a rubber component and falls under the category of consumable parts. In northern regions, it is recommended to replace it at 60,000 kilometers, preferably not exceeding 80,000 kilometers. In southern regions, it can be extended to 80,000 to 100,000 kilometers. The replacement interval should be referenced according to the vehicle's maintenance manual. When the engine timing belt shows signs of aging or cracking, it should be replaced promptly. Failure to replace it can lead to poor engine operation and, in severe cases, engine failure. Method for replacing the car timing belt: Remove the valve cover, detach the crankshaft pulley, and take off the timing chain cover. Rotate the crankshaft to the top dead center of the first cylinder, then tighten the crankshaft fixing screw to secure the crankshaft. Rotate the intake and exhaust camshafts. There are grooves at the rear of the camshafts; align the grooves of both camshafts evenly and insert the specialized tool. Remove the old chain and install the new one. The crankshaft pulley does not have a keyway. During installation, align the round hole on the pulley with the groove on the chain cover. The crankshaft position sensor is adjustable. Ensure the gap is properly adjusted during installation to avoid fault codes. Both the crankshaft sprocket and pulley can rotate freely.
20
4
Share

Where is the rearview mirror heating switch for the 2021 Elantra?

The rearview mirror heating switch for the Elantra is located on the vehicle's air conditioning panel. Here is some relevant information about the Elantra: Body: The body appears gentle and elegant, but the redesigned front face gives it an aggressive look. Two thick ridges on the engine hood extend forward to the small but prominent radiator grille, creating a strong sense of forward motion. Interior: The interior lines of the Elantra are relatively simple, with a beige color scheme that gives a fresh and clean feel. The center console and door armrests are accented with matte metal trim, adding a stylish touch. The cabin is notably wide, with ample legroom and headroom in both the front and rear seats.
2
4
Share

What is the real fuel consumption of the Mondeo 1.5t?

The Mondeo 1.5t currently has two models on sale: the Luxury and the Fashion, both with a combined fuel consumption of 7.3L/100km. The above figures are the NEDC combined fuel consumption, which is the data measured under the NEDC test procedure for combined driving conditions. The real fuel consumption is higher than this value, ranging from 9.63 to 12.03L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive carbon deposits in the engine are a significant cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not noticeable, it indicates a high level of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional technicians to clean the carbon deposits inside the engine. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio in the engine. Once it is damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. When the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gases during driving, and the oxygen sensor should be replaced at this time. Regularly replace the three filters: During the use of the vehicle, the oil filter, air filter, and fuel filter must be replaced regularly. If they are not replaced for a long time, they become dirty and send incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased carbon deposits in the engine. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in older vehicles, various faults may inevitably occur.
6
4
Share

What are the differences between Hyundai ix25 and ix35?

The main differences between Beijing Hyundai ix25 and ix35 are as follows: Different body dimensions: The body dimensions of Beijing Hyundai ix25 are: length*width*height (mm), 4290*1780*1646 (mm), with a wheelbase of 2590mm; The body dimensions of Beijing Hyundai ix35 are: length*width*height (mm), 4435*1850*1680 (mm), with a wheelbase of 2640mm. Different powertrain configurations: Beijing Hyundai ix25 offers powertrain configurations including: 1.5L and 1.6L naturally aspirated engines, 1.4L turbocharged engine, matched with 4 types of transmissions: 6-speed manual, CVT continuously variable transmission, 6-speed automatic manual transmission, and 7-speed dual-clutch transmission; Beijing Hyundai ix35 offers powertrain configurations including: 2.0L naturally aspirated engine, 1.4L turbocharged engine, matched with 3 types of transmissions: 6-speed manual, 6-speed automatic manual transmission, and 7-speed dual-clutch transmission. Different suspension configurations: ix25's suspension configuration: front MacPherson strut independent suspension and rear torsion beam non-independent suspension; ix35's suspension configuration: front MacPherson strut independent suspension and rear multi-link independent suspension.
6
1
Share

Can Tesla be charged with 220V?

Tesla can be charged with 220V. Tesla can be charged using a 220V 10A/16A household socket. Charging specifications: Most ordinary households in China use 220V-40A electric meters, and sockets are mostly 10A or 16A. By using the charging cable provided by TESLA with the corresponding plug and selecting the charging current through the central control, charging can be initiated. Charging time: 220V 10A charges 2.2kwh per hour, allowing a range of 7-10 kilometers. It takes about 40 hours to charge from empty to full. 220V 16A charges 3.52kwh per hour, allowing a range of 10-18 kilometers. It takes about 25 hours to charge from empty to full. Precautions: Most Tesla owners will install a single-phase wall-mounted charger in their garage or parking space, using 220V AC power. This charging method takes relatively longer, charging 6-7 kWh per hour, which translates to approximately 40 kilometers. Using slow charging, it takes about 10 hours to fully charge.
20
2
Share

What is the reason for the temporary unavailability of the 4matic display in Mercedes-Benz?

Generally, it is due to a fault in the four-wheel drive system or a false alarm from the system computer. The following is a specific introduction to the 4MATIC technology: Working method: 4MATIC technology uses the automatic braking force distribution function of ABS to achieve differential limitation. When a wheel of this full-time four-wheel drive vehicle slips, the on-board computer uses ABS to brake the slipping wheel to limit idling. Thus, the differential can transfer the power transmitted to the slipping wheel to other non-slipping wheels. Features: The 4MATIC full four-wheel drive system is compact and lightweight, and also has optimal performance in terms of friction. Compared with other full four-wheel drive systems, the advantages are quite obvious, with outstanding performance in weight, fuel economy, comfort, and safety in passive states.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.