What is the battery model of the Southeast V3 Lingyue?

How Many Kilometers Can an AT Transmission Last?

AT transmissions typically have a real lifespan of around 500,000 kilometers. Due to their high torque tolerance, many off-road vehicles and military vehicles use AT transmissions, which can endure tough towing and rugged terrain without issue. There are several ways to extend the lifespan of a transmission. Changing Transmission Fluid: Replace the transmission fluid according to the manufacturer's recommended schedule or mileage. Although many manufacturers claim their transmissions are maintenance-free, the fluid should generally be changed every 60,000–80,000 kilometers (varies by model). After the first maintenance, it is advisable to change the fluid every 40,000–60,000 kilometers to prevent degradation. Gear Selection: Avoid leaving the transmission in Drive (D) when stationary for extended periods. Keeping it in D means the transmission remains engaged, causing internal components to rub against each other, agitating the fluid and raising temperatures. Over time, this accelerates fluid degradation, reducing lubrication and cooling efficiency, leading to increased wear. Driving Habits: Match gear selection to speed—avoid high speeds in low gears or low speeds in high gears. Coasting in neutral is also harmful, as it cuts off oil supply to the transmission and leaves the vehicle in a passive, unsafe state. Additionally, avoid shifting into Park (P) before the vehicle comes to a complete stop, as this can damage internal components.

17

2

Share

Which brand does the Tank 300 belong to?

Tank 300 is the first hardcore off-road SUV launched under the WEY brand. It was officially released in December 2020, with three models available: Explorer, Challenger, and Conqueror. Body dimensions: The Tank 300 measures 4760 mm in length, 1930 mm in width, and 1927 mm in height, with a wheelbase of 2750 mm. The vehicle has a minimum ground clearance of 224 mm and is a five-door, five-seat SUV model with an 80-liter fuel tank capacity. Powertrain: The Tank 300 is equipped with a 2.0T direct-injection turbocharged engine paired with a ZF 8AT transmission. It features "three differential locks," tank turn, and crawl mode, providing technical support for users' deep off-road adventures.

8

3

Share

What is the minimum speed limit on highways when the maximum is 120 km/h?

According to the "Regulations for the Implementation of the Road Traffic Safety Law" in China, the speed limits on highways are standardized. The minimum speed limit on highways must not be less than 60 kilometers per hour, and the maximum speed must not exceed 120 kilometers per hour, which is an internationally accepted standard. When driving on highways, it is essential to pay attention to the speed and avoid going too fast. Reasons for the 120 km/h speed limit on highways: 1. Road factors: The limit of 120 km/h is set based on China's road design standards. The friction coefficient of the road surface, the strength of guardrails, lane width, gradient, curvature radius, and sign size are all designed according to the 120 km/h standard. If the speed limit is increased recklessly, all related designs would need to be revised, and existing highways would require reconstruction, which would be extremely costly. 2. Driver factors: The driver's vision, field of view, and reaction time are the three most critical elements affecting traffic safety. Generally, as speed increases, a driver's vision and field of view deteriorate. 3. Vehicle factors: Vehicles can handle speeds of 120 km/h without any issues. In the event of a tire blowout at this speed, there is still a chance of survival. However, at 200 km/h, the chances of survival are virtually zero. 4. Environmental factors: Environmental factors include various aspects, such as adverse weather conditions, poor road conditions, diverse vehicle types, overall poor vehicle condition, speeding, fatigue driving, and overloaded transportation. When adverse weather conditions like rain, snow, fog, or ice occur, the safety coefficient of road traffic significantly decreases. In such cases, drivers need to proactively reduce their speed to ensure safety.

20

3

Share

What are the reasons for the high fuel consumption of the Mondeo?

The high fuel consumption of the Mondeo is due to the carbon canister solenoid valve being prone to damage, which affects the increase in fuel consumption. The Mondeo is an American model, and compared to other series of vehicles, its body is relatively heavier. With the same engine, the greater the mass, the higher the fuel consumption. Related introduction: 1. New Mondeo: The Mondeo has fully entered the turbocharging era. The new models use three types of engines: a 1.5-liter turbocharged engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. 2. 1.5-liter turbocharged engine: It has a maximum power of 181 horsepower and a maximum torque of 240 Nm. The maximum torque speed of this engine is 1750 to 4500 rpm, and the maximum power speed is 6000 rpm. 3. Low-power version: It has a maximum power of 204 horsepower and a maximum torque of 350 Nm. The maximum torque speed of this engine is 1850 to 4000 rpm, and the maximum power speed is 5000 rpm. 4. High-power version: It has a maximum power of 234 horsepower and a maximum torque of 350 Nm. The maximum torque speed of this engine is 1850 to 4500 rpm, and the maximum power speed is 5000 rpm.

13

4

Share

Are Brake Fluid and Clutch Fluid Shared?

Brake fluid and clutch fluid are generally interchangeable in most cases. Working principle of clutch fluid: The clutch controls the engagement and disengagement between the engine and the wheel transmission system. It uses fluid as the transmission medium, leveraging the principle that liquids cannot be compressed to provide assistance, which is essentially the same working principle as brake fluid. Using DOT3 or DOT4 standard fluids: For household vehicles, DOT3 or DOT4 standard fluids are typically used. Vehicles originally using DOT3 standard can switch to DOT4, but those originally using DOT4 standard fluid should not use DOT3 as a substitute.

2

1

Share

What are the dimensions of the Polo?

The dimensions of the Volkswagen Polo are 4053mm in length, 1740mm in width, and 1449mm in height, with a wheelbase of 2564mm. The fuel tank capacity is 42.5 liters, and the body structure is a 5-door, 5-seat hatchback. Powertrain: The Volkswagen Polo is equipped with the EA211 series engine, featuring a 1.5L naturally aspirated engine that delivers a maximum horsepower of 113 HP and a maximum power output of 83 kW at 6000 RPM. Suspension: The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.

5

1

Share

What is the battery model of the Southeast V3 Lingyue?

How Many Kilometers Can an AT Transmission Last?

Which brand does the Tank 300 belong to?

What is the minimum speed limit on highways when the maximum is 120 km/h?

What are the reasons for the high fuel consumption of the Mondeo?

Are Brake Fluid and Clutch Fluid Shared?

What are the dimensions of the Polo?

What are the features of the 7th Generation Elantra Premium Edition?

Why does a car's air conditioner have a lot of water flow but not cool properly?

What are the things that need to be regularly added to a car?

What is the fuel tank capacity of the Malibu?