What is the battery model of the Mazda3 Axela?

What is the fuel consumption of the Camry Hybrid?

The comprehensive fuel consumption of the Camry ranges from 4.1-6.0L/100km. Currently, there are 10 models of the Camry available for sale. The Elite version has a comprehensive fuel consumption of 5.5L/100km. The Luxury version has a comprehensive fuel consumption of 5.7L/100km. The Sport version has a comprehensive fuel consumption of 5.8L/100km. The Luxury, Sport, and Flagship versions have a comprehensive fuel consumption of 6L/100km. The Hybrid Sport, Hybrid Luxury, Hybrid Flagship, and Hybrid Leading versions have a comprehensive fuel consumption of 4.1L/100km. The above figures are based on the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than these values, ranging from 4.9-8.8L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacement generally consume more fuel than those with smaller displacement, as larger displacement usually means higher power output, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the injected gasoline is harder to atomize during cold starts, requiring more gasoline to burn, which increases fuel consumption. Additionally, at low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

14

0

Share

What are the body dimensions of the Kodiaq GT?

The length, width, and height of the Kodiaq GT are 4634mm/1883mm/1649mm, which are official data. The length of the Kodiaq GT refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The turbocharged engine of the Kodiaq GT has a maximum power of 137kW and 162kW, and a maximum torque of 320Nm and 350Nm. The maximum power speed of this engine is 4100 to 6000 rpm and 4500 to 6200 rpm, while the maximum torque speed is 1500 to 4000 rpm and 1500 to 4400 rpm. It is equipped with hybrid injection and direct injection technology, and uses an aluminum alloy cylinder head. This engine is paired with a 7-speed wet dual-clutch transmission. There are relevant national regulations regarding vehicle dimensions. According to the national standard "GB1589-89", the total width of a vehicle does not include the rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, under national standards, the significance of vehicle width data is to ensure sufficient space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.

17

2

Share

What to Do When the EPC Light on the Car Dashboard is On?

The EPC indicator light can illuminate in two states: during the power-on self-test and under other circumstances. The power-on self-test is an indication that the vehicle is checking the status of all sensors before driving. Generally, if the vehicle is not started after power-on, the light will turn off by itself after about 3 seconds. In other cases, if the EPC light remains on after the vehicle starts or does not turn off for a long time, the main causes may include faults in the engine intake system, throttle body, fuel system, engine, ECU control unit, or brake lights. Below is a detailed explanation of the reasons for the EPC light coming on under other circumstances: Engine intake system fault: The EPC light will illuminate if the engine intake is obstructed or insufficient. Throttle body fault: Carbon buildup is a common issue with the throttle body. Additionally, dirt accumulation can affect air intake, causing the light to come on. Fuel system fault: Issues such as substandard fuel, fuel deterioration, or poor fuel atomization can trigger the light. Engine fault: Insufficient engine pressure or problems with components like the intake valves can also cause the EPC light to illuminate. ECU control unit fault: This includes interference with the vehicle's computer signals or false alarms from the computer. Brake light fault: Malfunctions such as brake lights not working, faulty brake switches, or brake circuit issues can trigger the EPC light. Solutions for when the EPC light comes on: Troubleshoot the intake system, use fuel with the appropriate octane rating, and clean the throttle body. Remove carbon deposits from relevant components. Re-flash the ECU data. If the EPC light comes on, the driver can first try turning off the engine and restarting it to see if the light remains on. If it does not, the issue may have been temporary. If the light stays on or frequently illuminates, the vehicle should be taken to the nearest service center for professional diagnosis and repair to eliminate potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data is abnormal, the EPC system takes predefined actions to manage the powertrain. Commonly, the EPC indicator light appears in two colors: yellow and red. A yellow EPC light indicates a fault, but the vehicle can still be driven slowly to a repair shop. A red EPC light signifies a more serious issue, requiring immediate parking and contacting a professional for repair. Continuing to drive with a red light may damage core components or compromise safety.

14

1

Share

What is the urban fuel consumption of the Corolla?

The comprehensive fuel consumption of the Corolla is 4.0-5.6L/100km. There are a total of 12 Corolla models currently on sale. The E-CVT Pioneer version has a fuel consumption of 4L/100km. The E-CVT Elite and E-CVT Flagship versions consume 4.1L/100km. The CVT Pioneer version consumes 5.1L/100km. The CVT Elite, CVT Elite CARE, and SPORT versions consume 5.2L/100km. The Pioneer PLUS version consumes 5.5L/100km. The Elite PLUS, Flagship, Luxury, and Manual Pioneer versions consume 5.6L/100km. The above figures are NEDC comprehensive fuel consumption, measured under the NEDC test procedure. Real-world fuel consumption ranges from 2.0-10.5L/100km. Here are five tips to help reduce fuel consumption while driving: When starting the vehicle, use a low gear and gently press the accelerator to gradually increase speed. Avoid sudden hard acceleration, as this can multiply fuel consumption. Light acceleration and braking, early braking: While driving, press the accelerator lightly to avoid sudden increases in engine RPM and prevent vehicle shuddering, which improves fuel efficiency. Anticipating road conditions and applying slow, even acceleration or braking can improve fuel economy by up to 20%. Maintain proper tire pressure: Keep tire pressure at the manufacturer's recommended level. For every 2 PSI below the recommended value (approximately 0.2 in metric units, relative to a standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle checks: Timely oil changes can reduce carbon buildup (which can cause rough ignition, sluggish acceleration, increased fuel consumption, and even cylinder misfires in severe cases). Regularly check and replace dirty air filters, clean or replace fuel injectors, spark plugs, and throttle bodies as per mileage recommendations. Keep windows closed while driving. Open windows increase wind resistance, which in turn increases vehicle resistance, requiring more power and thus increasing fuel consumption. To summarize, the following techniques can help reduce fuel consumption: Start in low gear, press the accelerator lightly, maintain proper tire pressure, perform regular maintenance or vehicle checks, and keep windows closed while driving.

18

5

Share

Where should the ETC device be installed?

The ETC installation position is generally on the upper middle part of the front windshield horizontally, while for large vehicles such as trucks and buses, the installation position is on the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect the signal transmission of the microwave communication link, it should be installed on the microwave sunroof strip. ETC is the abbreviation for Electronic-Toll-Collection, meaning electronic toll collection system. To apply, the vehicle owner needs to provide original and photocopies of their valid ID card and vehicle license. If the application is handled by a non-owner, the agent's valid ID card is also required. The photocopy of the vehicle license should include the page with the most recent annual inspection seal. A bank card for deducting highway tolls is also needed, and the vehicle must be registered under the name of an individual aged between 18 and 60. Documents required for company vehicles: Introduction letter from the vehicle owner (with official seal); Copy of the organization code certificate or business license (with official seal); Original ID card of the agent; Original vehicle license; Vehicle requiring ETC installation. Here are the precautions for ETC installation: Do not obstruct the view; it's best to install it behind the rearview mirror: Many car models have a large inclination angle of the windshield, which reduces the driver's field of vision. If ETC installation does not consider this, it may increase the driver's blind spots. Install it behind the rearview mirror on the right side to avoid obstructing the view. Do not affect charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-tamper rod connected to a switch. After installation, the windshield will press the anti-tamper rod in. If removed arbitrarily, the rod will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Precautions for using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the vehicle in front. The recognition speed for ETC lanes is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle device information and failed toll deduction. When using a debit card for ETC, insufficient balance may also lead to failed toll deduction.

9

1

Share

Where does the water under the rear foot mat come from?

If there is water or moisture under the car foot mat, lift up all the foot mats and floor coverings until you can see the metal body of the car. Dry them thoroughly before using them again. Here is some information about car seat covers: 1. Tencel car seat covers: Tencel is a high-molecular seat cover material, a type of fiber with strong moisture-wicking and sweat-absorbing properties. It is more durable than most natural and synthetic fibers. 2. Bamboo charcoal car seat covers: The porous structure of bamboo charcoal effectively absorbs various odors inside the car. It generates negative ions to purify the air, keeping the interior fresh. It can eliminate car odors and emit infrared rays to reduce driving fatigue.

18

5

Share

What is the battery model of the Mazda3 Axela?

What is the fuel consumption of the Camry Hybrid?

What are the body dimensions of the Kodiaq GT?

What to Do When the EPC Light on the Car Dashboard is On?

What is the urban fuel consumption of the Corolla?

Where should the ETC device be installed?

Where does the water under the rear foot mat come from?

What are the hidden functions of the Volkswagen Tiguan key?

Does Infiniti Have a Mid-Size Sports Sedan?

What is the oil specification for the Tiguan L?

What Type of Fire Extinguisher Should Be Used for a Car Fire?