What is the battery model of the Mazda CX5?

2 Answers
DiLilliana
09/03/25 3:25am
The battery model of the Mazda CX5 is 80d261. The battery is a crucial component of a vehicle, as it supplies power to all electrical components when the engine is not running, and it is also responsible for starting the engine. During engine start-up, the fuel supply system, ignition system, and starter all require electricity to function. The Mazda CX5 has body dimensions of 4545mm in length, 1840mm in width, and 1690mm in height, with a wheelbase of 2700mm. The Mazda CX5 is equipped with a 2.0L naturally aspirated engine and a 2.5L naturally aspirated engine.
Was this review help?
8
5
Share
StEleanor
09/15/25 5:09am
I used to drive a Mazda CX-5, the 2015 gasoline version, and the battery model was 55B24L, a fairly common specification representing 12 volts and 60 ampere-hours. However, the model may vary depending on the year and region, such as newer models or overseas versions which might be different. When I replaced the battery, I measured the dimensions to be approximately 24 cm in length, 16 cm in width, and 20 cm in height. Doing it yourself isn’t difficult, but be careful not to mix up the positive and negative terminals. In cold weather, the battery tends to weaken, so I check it with a voltmeter every six months—if it drops below 12.4 volts, I consider replacing it. Additionally, frequent start-stop driving in the city can shorten its lifespan, so I recommend choosing a reputable brand over generic ones. If you’re unsure about the model, you can always find detailed information in the owner’s manual or on the label under the hood.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

What is the charging speed of Tesla?

Most Tesla owners will install a single-phase wall-mounted charger in their garage or parking space, using 220V AC power. This charging method takes relatively longer, with about 6-7 kWh charged per hour, which translates to approximately 40 kilometers. Using slow charging, it takes about 10 hours to fully charge. Below are some precautions regarding new batteries: 1. Master the charging time: Generally, batteries are charged at night, with an average charging time of about 8 hours. If it's a shallow discharge (short driving distance after charging), the battery will be fully charged quickly. Continuing to charge will lead to overcharging, causing water loss and heating of the battery, thereby reducing its lifespan. 2. Avoid storing the battery in a depleted state: A depleted state refers to not charging the battery promptly after use. In this state, sulfation is likely to occur, with lead sulfate crystals adhering to the plates, blocking ion channels, resulting in insufficient charging and reduced battery capacity. The longer the battery remains idle in a depleted state, the more severe the damage. When the battery is not in use, it should be charged once a month to extend its service life. 3. Regular inspection is necessary: During use, if the electric vehicle's range suddenly drops by more than ten kilometers in a short period, it is highly likely that at least one battery in the group has issues such as broken grids, softened plates, or shedding of active material from the plates, leading to a short circuit. In such cases, it is advisable to promptly visit a professional battery repair facility for inspection, repair, or replacement.
13
4
Share

What does a flashing red thermometer light on the dashboard indicate?

This is the coolant temperature warning light, indicating that the coolant temperature is outside the specified range. A red light signifies that the engine is overheating. Here is relevant information: Normal coolant temperature: The standard engine coolant temperature should be around 90°C. If the temperature becomes excessively high or low, or rises/drops rapidly, it indicates an issue with the vehicle's cooling system. Battery indicator light: The battery light displays the working status of the car battery, typically appearing in red or yellow. If this light remains illuminated after starting the vehicle, it alerts you to potential battery problems requiring inspection or replacement.
20
4
Share

What are the precautions for the break-in period of the UY125?

When driving the UY125 during the break-in period, it is essential to control the engine speed and try to maintain a steady speed. If you occasionally push the speed to the limit or climb a short slope during the entire usage period, it will not have a significant impact on the engine itself. Below is some relevant information: Suzuki's development history: Suzuki began producing motorcycles in 1952 and started manufacturing cars in 1955, primarily focusing on mini cars. General Motors holds a 10% stake in Suzuki. Suzuki first provided technology to the Chinese market in 1984 and was one of the earliest Japanese automakers to enter the Chinese market. On November 5, 2012, Suzuki announced its withdrawal from the U.S. automobile sales market to focus on motorcycle sales. Jincheng Suzuki: Starting in 1996, Nanjing Jincheng Motorcycle Group collaborated with Suzuki to produce models such as the SJ125-B (GX125) and SJ110-F, becoming one of Suzuki's three partners in China.
17
2
Share

What is the difference between a three-section road and a four-section road?

The difference between a three-section road and a four-section road lies in the direction of travel and the scope of application. Direction of travel: A three-section road is a two-way motor vehicle lane; a four-section road not only separates motor vehicles from non-motor vehicles but also separates motor vehicles traveling in opposite directions. Scope of application: A three-section road is suitable for areas with lower vehicle speeds, with non-motor vehicle lanes on both sides traveling on the right; a four-section road is suitable for areas with higher motor vehicle speeds, typically expressways or main roads with two or more motor vehicle lanes in each direction. Below is relevant information: Three-section road: Commonly known as a 'three-plate' cross-section, the middle is a two-way motor vehicle lane, with non-motor vehicle lanes on both sides traveling on the right. Four-section road: Commonly known as a 'four-plate' cross-section, based on the three-section road, the middle motor vehicle lane is further divided into two, separating the directions of travel.
16
3
Share

What size wrench is used for an M8 bolt?

An M8 bolt requires an open-end wrench with a size of 14. For hex bolts, the corresponding open-end wrench size is more accurately determined by the hex nut, as there are both standard hex head bolts and small hex head bolts. Open-end wrench sizes: Common open-end wrench sizes are 7, 8, 10, 14, 17, 19, 22, 24, 27, 30, 32, 36, 41, 46, 55, and 65; corresponding to thread sizes M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M22, M24, M27, M30, M36, and M42. Units: Metric thread diameters are measured in millimeters, such as 6, 8, 10, 12, 18, 20 mm, etc. The thread pitch is also measured in millimeters, such as 0.5, 0.75, 1, 1.5, 2, 3, etc.
2
5
Share

How to replace the battery of the Southeast DX7 key?

Southeast DX7 key battery replacement method: First remove the mechanical key, then pry open the chrome decoration of the smart key, split it from the middle, remove the old battery, and install the new battery. It is recommended that the owner confirms the battery model when purchasing to avoid buying incompatible batteries. The Southeast DX7 has a body size of 4354mm in length, 1840mm in width, and 1670mm in height, with a wheelbase of 2610mm. The Southeast DX7 is equipped with two engines: a 1.5-liter turbocharged engine and a 1.8-liter turbocharged engine.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.