What is the battery model of the Lavida?

1 Answers
ZacharyAnn
07/25/25 2:51am
The battery model of the Volkswagen Lavida is a 12V-60AH Fengfan battery, and it can also use a Bosch battery with the model L2-400. 12V-60AH, where 12V represents the rated voltage of the battery, which is the optimal voltage for the device to work normally for a long time, and 60AH refers to 60 ampere-hours, representing the 20-hour rate capacity. The meaning of the battery 12V-60AH is that this 12V battery can discharge for 1 hour when the output current is 60A. The service life of the original battery of the Lavida car is 3-4 years, and Volkswagen's warranty period for the battery is two years. In addition to regular maintenance at the 4S store, car owners should also do a good job of battery maintenance in daily use. The precautions for car maintenance are as follows: If the unlocked car is parked for a long time, it may cause the car battery to run out of power and the engine cannot be started again; To avoid damage to the car's electrical devices, do not connect power supply accessories such as car battery chargers to the 12V socket or cigarette lighter; If the key is placed in the "ACC" position of the ignition switch for a long time when the engine is turned off, it will cause the car battery to lose power; Do not expose the battery to direct sunlight for a long time, as strong ultraviolet rays can damage the battery casing.
Was this review help?
19
2
Share
More Forum Discussions

How Often Should Window Tint Film Be Replaced?

Car window tint film should be replaced based on the degree of wear and tear. Generally, it needs to be replaced every 3 years or so. In the Chinese market, most car windows are made of ordinary glass or coated glass, with UV blocking rates of 19% and 37% respectively. Here is some related information about car window tint film: 1. Introduction: Car window tint film (Auto-tint-film) refers to a thin film applied to the front and rear windshields, side windows, and sunroof of a vehicle. This film is also known as solar film or heat insulation film. 2. Functions: The primary functions of window tint film include blocking ultraviolet rays, reducing heat transmission, preventing injuries from shattered glass, reducing glare, and protecting personal privacy by utilizing the one-way visibility feature of the film.
6
1
Share

Where is the drain valve for the Audi Q5 radiator?

Audi Q5 radiator drain valve is located under the car's radiator. The following is an introduction to the drainage method and function of the Audi Q5 radiator: Audi Q5 radiator drainage method: There is a drain screw at the bottom rear of the vehicle's radiator. Simply unscrew the drain screw to properly drain the water. It should be noted that when draining the radiator, the vehicle must be completely cooled, otherwise there is a risk of scalding. Function of the car radiator: The car radiator, also known as the heat exchanger, is the main component of the car's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to dissipate the heat, and then returns to the water jacket in a continuous cycle.
16
0
Share

Does the Audi A8 require matching when replacing the battery without power interruption?

Audi A8 requires matching when replacing the battery without power interruption. Audi battery matching method: The battery of an Audi is located under the spare tire in the trunk. After lifting the floor panel, you can remove the battery by unscrewing 5 nuts. After replacing the battery, to perform the matching, you need to enter unit 56, then go to matching, and finally enter channel 39 to change 65519 to 65535. Audi battery lifespan: The lifespan of an Audi battery is 5-6 years, after which it needs replacement. It is recommended to have the battery inspected during the 3-4 year maintenance service. The battery consumes more power in winter and is prone to failure because the cold weather increases oil viscosity, making the engine work harder and requiring the battery to maintain sufficient power for higher RPMs.
14
0
Share

How to Change the Oil for Volkswagen 6-Speed Wet Dual Clutch?

Volkswagen 6-speed wet dual clutch oil change method: Open the drain plug, drain the old transmission oil from the transmission, then tighten the drain plug, and add new transmission oil from the transmission oil filler port. The dual-clutch transmission is a relatively common automatic transmission, which is developed based on the manual transmission. The Volkswagen Tiguan is equipped with a 6-speed wet dual-clutch transmission. It is a compact SUV produced by Shanghai Volkswagen, offering a total of 4 versions and 7 models, including Urban Edition, Trendline, Comfortline, and Highline. In terms of body dimensions, the Tiguan measures 4506mm in length, 1809mm in width, and 1685mm in height, with a wheelbase of 2684mm.
17
1
Share

What causes the Haval to automatically shift to P gear when starting?

The reasons for the Haval automatically shifting to P gear when starting are accidentally pressing the P gear button, not stepping on the brake pedal, or the engine being turned off. Below are detailed explanations for the above reasons: Accidentally pressing the P gear button: During the process of starting the vehicle, the driver or other passengers accidentally pressed the P gear button. Not stepping on the brake pedal: When starting the vehicle, the door was not tightly closed, and the brake pedal was not pressed during the starting process, causing the vehicle to receive a signal and automatically shift the gear to P. Engine being turned off: If the vehicle's engine is turned off during use, the gear will automatically shift from R or D to P gear. This situation will also cause many ignition devices to automatically shut down.
14
2
Share

Is License Plate Frame Allowed?

License plate frames are allowed to be installed. Here is relevant information about license plate frame installation: 1. New traffic regulations stipulate: Violations such as failing to display license plates, improperly installing plates, or intentionally obscuring/damaging plates will now result in 12 penalty points (increased from the previous 6 points). 2. Correct license plate installation method: Installed plates must be "clearly visible and intact without obstruction or damage, with all four fasteners present. Additionally, the license plate frame must not contain illegal characters or decorative patterns. The inner edge of the frame must maintain a distance greater than 5mm from the vehicle registration number characters, and all four fasteners must be specialized fasteners meeting regulatory standards.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.