···
Log in / Register

What is the battery model of the Langdong?

5 Answers
VanJayce
07/24/25 4:31am

The battery model of the Langdong is 12V60Ah. The battery is a type of storage battery, also known as an accumulator, and its working principle is to convert chemical energy into electrical energy. Taking the 2016 Langdong as an example, its body dimensions are: length 4570mm, width 1775mm, height 1445mm, with a wheelbase of 2700mm, a fuel tank capacity of 50L, and a trunk capacity of 473L. The 2016 Langdong is equipped with a 1.6L 4-cylinder naturally aspirated engine, with a maximum horsepower of 128 and a maximum power of 93.8 kW. It is paired with a 6-speed manual transmission, and the drive system is front-wheel drive. The front suspension uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension.

Was this review help?
2
5
Share
Troy
08/10/25 10:37pm

The battery model for the Langdong is typically a 12-volt 60 ampere-hour or 70 ampere-hour specification, with common part numbers being 55D23L or 75D23L, depending on the year of your car. For example, models from 2012 to 2016 often use the 55D23L. The voltage is standard at 12V, and the capacity determines how long it can support starting and operation. I once drove a 2014 Langdong, and the original battery was this model. When replacing the battery, check if the size fits the battery compartment and pay attention to the cold cranking amps (CCA), which is generally sufficient between 500 to 600 amps. Don’t overlook daily maintenance—regularly clean the electrode terminals to prevent oxidation. In summer, electrolyte evaporates quickly due to high temperatures, so checking the water level is crucial. If starting feels sluggish or the lights dim, it’s time for a replacement. Battery life is usually three to five years. It’s advisable to choose reliable brands like Camel or Varta and have them installed at a professional shop for peace of mind.

Was this review help?
13
3
Share
Expand All
OEverett
09/24/25 5:34am

The Langdong battery is typically the 12V type, with common models like 55D23L and capacities ranging between 60 to 70 ampere-hours. My car is a 2015 Langdong, and I just replaced the battery with the 55D23L version. Matching voltage and capacity is crucial—12V is standard, and insufficient capacity will prevent the car from starting. Driving habits affect battery health; for example, avoid frequently listening to music or running the AC with the engine off, as this accelerates power drain. If the engine struggles when starting, the battery is likely nearing its end. Checking it yourself is simple: look at the old battery’s label for the model and capacity numbers. When replacing, don’t skimp—choose a reputable brand like Fengfan or Bosch, with a reasonable price around 400 yuan. Be careful during installation to avoid short circuits, and disconnect/connect the terminals in the correct order. Regularly test the battery voltage, ideally maintaining it above 12.6 volts.

Was this review help?
8
5
Share
Expand All
Dustin
11/07/25 7:46am

The standard battery model for the Languang is around 12 volts and 60 ampere-hours, such as the 55D23L, with dimensions suitable for the 2012-2016 models. The voltage must be 12V, and the capacity depends on the vehicle configuration. Check the numerical label printed on the battery for confirmation. Battery life is affected by driving habits; frequent starts in city driving consume power quickly, potentially reducing lifespan to three or four years. When replacing, pay attention to the CCA (Cold Cranking Amps) value, which should be above 500A. Choose between lead-acid or AGM types, ensuring the size is correct. Maintenance tip: Clean the electrodes monthly.

Was this review help?
3
3
Share
Expand All
SanKyle
12/29/25 2:45am

The Elantra's battery mostly uses a 12-volt 60-ampere-hour specification, with common models like 55D23L. As an owner, the manual provides detailed instructions. The battery voltage is 12V as standard, and capacity affects performance and lifespan. Before replacing the battery, measure the battery compartment to ensure a size like 55D23L fits. Beginners often overlook daily maintenance, such as avoiding long-term parking without use, which can lead to battery discharge and aging. If starting becomes difficult or dashboard lights dim, consider replacement. Safety tip: Wear gloves during inspection to prevent acid contact. It's recommended to visit a professional shop for technician handling, as they will match CCA values and size. Choose original or compatible brands like Panasonic or Varta.

Was this review help?
8
1
Share
Expand All
More Forum Discussions

Which Volvo Technologies Are Used in the Lynk & Co 06?

The Lynk & Co 06 is equipped with a 1.5T three-cylinder engine that incorporates Volvo technology. Its overall performance is not inferior to some 1.8T engines, delivering a maximum power of 130kW (177PS) and a maximum torque of 265N·m. The transmission is a 7DCT gearbox. Here are other details about the Lynk & Co 06: 1. Exterior Design: Unlike conventional floating roof designs, it features sharp angular lines, giving it a more dynamic and powerful appearance. The Lynk & Co 06 also offers a two-tone body color option. 2. Interior Design: The cabin combines light and dark-colored panels and adopts a dual-screen layout for the instrument cluster and infotainment system. 3. Features: It comes with a parking camera, ACC adaptive cruise control, a panoramic sunroof, and more.
7
4
Share

What is the SET button in a car?

The SET button in a car is a speed adjustment switch, which serves as the speed regulation indicator for cruise control. When setting the cruise control, the vehicle needs to be accelerated to the desired speed, and then the SET button is pressed to adjust. To use cruise control, first press the ON button to activate the cruise control function. When setting the cruise control speed, press the SET button to configure it. Cruise control has speed limitations, typically requiring the vehicle to be traveling at least 48 km/h. If the brake pedal is pressed during driving, the cruise control will deactivate. To resume cruise control, press the RSM button in the car. To increase the cruise control speed, press the ACCEL button. To decrease the cruise control speed, press the CST button. The cruise control function in a car works by using a speed sensor to transmit signals and compare them with the set speed, ensuring the vehicle maintains the preset speed. The car's computer can then provide the most accurate fuel supply. Using cruise control allows for more complete fuel combustion in the engine, while also reducing fuel consumption.
16
2
Share

Solutions for Corolla Remote Key Failure?

Hold down the unlock button on the remote key, insert the key into the ignition hole, quickly turn the key to the car self-check position, immediately turn the key back to the lock position, and quickly repeat this process three times. Here is the relevant introduction to the Toyota Corolla: 1. Comprehensive safety features. The Toyota Corolla U.S. version comes standard with front and side airbags, and is equipped with the Toyota Safety Sense driver assistance suite, including standard features like lane departure alert, rearview camera, pre-collision system with pedestrian detection, automatic high beams, and dynamic radar cruise control. 2. Stable quality with low maintenance costs. Although the Toyota Corolla is not a luxury car, it has very stable quality and very affordable after-sales maintenance. 3. Spacious rear seat space. The Toyota Corolla focuses on space, with not only the domestic version offering large interior space, but the overseas version also providing ample room, with rear seat space up to 40 inches.
7
2
Share

What does the pressure gauge pointer indicate for normal pressure in a fire extinguisher

The pressure gauge pointer of a fire extinguisher indicates normal pressure when it is in the green zone. The normal pressure value of a fire extinguisher is approximately between 1.2—1.5 MPa. If the pointer is in the red zone, it means the pressure inside the cylinder is insufficient, indicating the fire extinguisher cannot be used normally. If the pointer is in the yellow zone, it indicates overpressure, meaning the pressure is too high and poses a potential danger (however, slight overpressure may still be considered normal). Relevant information about fire extinguishers is as follows: 1. Introduction: A fire extinguisher, also known as a fire cylinder, is a portable firefighting tool. It contains chemicals used to extinguish fires. The fire extinguisher is a sturdy metal cylinder filled with water or fire-extinguishing materials. 2. Working Principle: When the lever at the top of the cylinder is pressed, the high pressure generated forces the extinguishing agent inside the cylinder out, similar to how a spray can ejects its contents. The function of a fire extinguisher is to displace air, depriving the fire of oxygen and thus extinguishing it.
2
1
Share

What is the difference between a DSG transmission and an AT transmission?

The differences between a DSG transmission and an AT transmission are as follows: 1. AT: The torque converter is the most distinctive component of an AT transmission, consisting of components such as the pump wheel, turbine, and guide wheel, which directly input engine power to transmit torque and perform clutch functions. The pump wheel and turbine form a working pair, similar to two fans placed opposite each other, where the wind generated by one active fan drives the blades of the other passive fan to rotate, with the flowing air—wind—serving as the medium for kinetic energy transmission. 2. DSG: The DSG transmission is distinctly different from traditional automatic transmissions, as the DSG does not use a hydraulic torque converter from the outset. This transmission was not developed based on the conventional concept of an automatic transmission. The engineers who designed the DSG took an innovative and entirely new technological path, cleverly combining the flexibility of a manual transmission with the convenience of a traditional automatic transmission.
11
1
Share

What is the phenomenon of drivers using their eyes, ears, hands, and feet simultaneously while driving?

Drivers using their eyes, ears, hands, and feet simultaneously while driving is known as attention allocation. Here is relevant information: 1. Driving precautions: Suburban roads: There are many intersections, so be cautious of motorcycles and bicycles suddenly appearing from side roads. Avoid driving too close to the right boundary of the road and maintain sufficient safety distance. When pedestrians (especially the elderly or children) are present, remain highly alert, keep a safe distance, and control your speed. 2. "Three precautions": Pay attention to food hygiene: Due to the mobile nature of driving jobs, always choose clean and hygienic restaurants when dining to prevent infectious diseases. Pay attention to rest: Ensure adequate sleep to stay energetic and focused, enabling safe driving. Maintain a safe following distance: While driving, keep sufficient longitudinal and lateral safety distances, always be aware of the movements of vehicles and pedestrians, and avoid following the vehicle ahead too closely or driving side by side to prevent rear-end collisions and side-swipe accidents.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.