···
Log in / Register

What is the battery model of the Emgrand GL?

5 Answers
Hannah
08/26/25 4:45am

The original battery brand of the Emgrand GL is Camel, with the model number 55D23L, specifications of 12V, and a capacity of 60AH. Here is some extended information: Battery lifespan: The battery lifespan of the Emgrand GL is generally over 2 years. If the battery is dead, it is recommended to first measure the battery voltage. Multimeter check: If using a multimeter to check, measure the battery voltage when starting the engine. You can first use a high-frequency discharge meter or battery tester to measure, under a load current of no less than 110 amps, the minimum voltage should not be lower than 9.6 volts and should remain stable for 5 seconds. If the voltage is below 9.6 volts but can remain stable for 5 seconds, it indicates over-discharge and should be recharged promptly. If the voltage is below 9.6 volts and cannot remain stable within 5 seconds, quickly dropping to 0 volts or close to 0 volts, it indicates a possible battery fault that may require replacement.

Was this review help?
10
0
Share
Willa
09/08/25 6:22am

As an owner of an Emgrand GL, I remember the original battery was a 12V 60Ah model, specifically maintenance-free versions like Camel's L3-400 or 6-QW-60MF. When replacing the battery at the 4S dealership, I learned that model matching is crucial—otherwise, the charging system could overload and cause damage. I regularly check the battery terminals for corrosion and clean them with a damp cloth to prevent oxidation. Batteries typically degrade after about three years of use, so it's advisable not to wait until they're completely dead before replacing them. The battery is located in the front right of the engine bay; opening the cover reveals a label with its specifications. Maintaining good habits, such as testing the voltage before long trips, can help avoid the hassle of breaking down midway.

Was this review help?
13
5
Share
Expand All
VanJuliet
10/22/25 6:28am

For DIY car repairs, the battery model for the Emgrand GL is typically a 12V 60Ah maintenance-free type, such as the 6-QW-60 or Varta H6 series. Open the hood, and you'll find detailed specifications on the sticker on the front of the battery. Replacing it is straightforward: first, use a wrench to loosen the negative terminal clamp, then the positive one, and lift it out. When installing the new battery, reverse the order. It's crucial to purchase the exact model; incorrect size or current specifications might prevent it from fitting or cause a short circuit. All you need are a wrench and gloves for safety—avoid touching metal parts. Buying a compatible battery online can save money, but make sure to verify parameters like the CCA value. For regular maintenance, clean the terminals with baking soda solution.

Was this review help?
15
4
Share
Expand All
LaEli
12/05/25 6:50am

From an economic perspective, the original battery for the Emgrand GL is a 12V 60Ah model like the L3-400, priced at over 300 yuan. Choosing the wrong model with mismatched dimensions could waste money, and incorrect matching may damage the charging system, leading to costly repairs. I recommend checking the vehicle manual or visiting a repair shop for a free data scan before purchasing. Compatible brands like Fengfan or Panasonic can also be used, but ensure the ampere-hour rating and cold cranking amps match. Battery lifespan ranges from 2-5 years; regular voltage checks can extend usage, saving money and hassle. Minimizing electrical usage when the engine is off helps prevent battery drain issues.

Was this review help?
17
3
Share
Expand All
VanBenjamin
12/05/25 6:52am

From a safety perspective, a battery failure in the Emgrand GL can lead to failure to start or even fire. The standard model is a 12V 60Ah maintenance-free battery such as the H6-60-LB-T2. I've personally experienced battery depletion, and switching to the same model brought much more peace of mind. Regularly test the voltage, which should be above 12.6V; if it drops below 12V, address it immediately. Terminal corrosion can also cause dangerous short circuits, so monthly cleaning is recommended. In extremely cold regions, the CCA (Cold Cranking Amps) value drops, making breakdowns more likely—ensure the correct model is used for reliability. If the car breaks down, pull over immediately, turn on the hazard lights, and avoid continuing to drive.

Was this review help?
11
1
Share
Expand All
More Forum Discussions

Which Rearview Mirror to Look at When Reversing into a Parking Space?

Whether reversing to the right or left (reverse parking or forward parking), you can look at the left rearview mirror. Here are the specific instructions for reversing into a parking space: 1. Reverse Parking. When the vehicle is slowly starting to move backward from the stop line in a half-clutch state, observe the front window decal on the right rear triangular window pillar. When the decal touches the right boundary line of the parking space (you can adjust slightly in advance), immediately turn the steering wheel fully to the right at a steady speed. Then, shift your gaze to the left rearview mirror, paying attention to the distance between the car body and the left front corner of the parking space (if the distance is less than 20-30 cm, adjust the steering wheel slightly). When the left boundary line of the parking space is fully visible, immediately straighten the steering wheel. Stop the car when the front boundary line of the parking space aligns with the lower edge of the left rearview mirror. 2. Forward Parking. When the vehicle is slowly exiting the parking space in a half-clutch state, align the driver's body with the front boundary line of the parking space, then turn the steering wheel to the left (approximately one and a quarter turns, with the steering wheel at the one o'clock position). Continue moving forward until the car stops at the left parking line of the parking space, ensuring the car body is straight without adjusting the steering wheel. Reverse along the same path, observing the relationship between the car body and the left front corner of the parking space (if the distance is less than 20-30 cm, adjust the steering wheel slightly). When the left boundary line of the parking space is fully visible, immediately straighten the steering wheel. Stop the car when the front boundary line of the parking space aligns with the lower edge of the left rearview mirror.
8
5
Share

What is the reason why only one speaker in the Envision has sound?

Envision speaker only has sound in one side due to: 1. Circuit failure; 2. Other speakers getting wet. The Envision is a mid-size SUV under the Buick brand, equipped with two engines: one is a 1.5-liter turbocharged engine with a maximum power of 124 kW and a maximum torque of 250 Nm; the other is a 2.0-liter turbocharged engine with a maximum power of 191 kW and a maximum torque of 400 Nm. The front suspension of the Envision uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
5
5
Share

How to Start a Buick Envision with the Key?

The main steps to start a Buick Envision with the key are: 1. Unlock the vehicle and enter the car; 2. Insert the key into the ignition slot, turn it once to power on the vehicle, and wait for the onboard computer to complete the self-check; 3. After the self-check is completed, press the brake pedal and turn the key again to start the engine; 4. Once the vehicle is started, shift the gear to drive, then release the handbrake and brake pedal, after which you can drive normally. The Buick Envision is positioned as a midsize SUV with a relatively spacious interior. In terms of appearance, the Buick Envision presents a more rugged and bold look, with the new wing-shaped chrome trim running through the LED wing-shaped headlights, widening the horizontal visual effect. The dynamic bumper design and three-dimensional silver lower guard plate create a full and powerful front end.
19
5
Share

Can Strong Winds Blow a Car Away?

Whether strong winds can blow a car away depends on the car's weight, shape, and wind-exposed area. Below are detailed explanations regarding why strong winds can blow a car away: 1. Generally, a stationary car may be moved by a typhoon of level 10 or above, but this is usually due to indirect damage caused by other objects being destroyed by the typhoon. It is best to park the car in an underground garage or an open area with a clear view. Avoid parking under billboards, trees, or temporary makeshift structures. 2. The level of wind a car can withstand depends on its weight, shape, and wind-exposed area. Generally, sedans have stronger resistance to typhoons than SUVs because sedans have a lower center of gravity and height, resulting in better grip. 3. Moving cars and stationary cars have different resistance to typhoons. A moving car is in motion, and according to the physics of the relationship between moving objects and wind force, a moving car's ability to resist a typhoon is much weaker than that of a stationary car. Typically, a stationary car can withstand a level 14 typhoon, while a moving car may lose control in a level 12 typhoon, especially when the wind blows from the side, making the car prone to rollover accidents. 4. Drivers should avoid going out in typhoon weather whenever possible. If already on the road and encountering a typhoon, drive cautiously and reduce speed. On highways, exit at the nearest exit and prioritize safety. Below are safety precautions for driving in rainy weather: 1. If the vehicle encounters problems, call the insurance company to report the incident immediately, ensuring to file a claim within 24 hours. 2. Avoid driving in heavy rain if possible. If driving is necessary, thoroughly check the lights, brakes, steering, etc., before departure and drive carefully. 3. If water depth exceeds 20 cm, avoid driving through it. Instead, detour or push the car out of the water in neutral gear after turning off the engine to prevent water from entering the engine.
5
1
Share

How to adjust the headlight height of the Mazda3 Axela?

Steps to adjust the headlight height of the Mazda3 Axela: The headlight height adjustment knob is located on the plastic panel in front of the driver's left leg, marked with a light symbol. Simply rotate the knob up or down to adjust the headlight height. Note that there are four adjustment levels, with level 0 being the lowest and level 3 the highest. Manual headlight height adjustment can generally be done in two ways: using the headlight adjustment knob or using a screwdriver. The Mazda3 Axela is a compact sedan launched by Mazda, with dimensions of 4582mm in length, 1795mm in width, 1458mm in height, and a wheelbase of 2700mm.
19
4
Share

How to replace the key battery of the Mazda3 Axela?

Steps to replace the key battery of the Mazda3 Axela: There is a small button on the back of the Mazda3 Axela's car key. Pressing this button allows you to remove the mechanical key. Then, you can use a prying tool to gently open the key casing along the seam, enabling you to replace the battery. The battery inside the car remote key typically lasts for 2 to 3 years. When the battery runs out, it needs to be replaced. If the battery is dead, the remote control will stop functioning. The Mazda3 Axela is equipped with two naturally aspirated engines: one is a 1.5-liter naturally aspirated engine, and the other is a 2.0-liter naturally aspirated engine. The 1.5-liter naturally aspirated engine has a maximum power of 86 kW and a maximum torque of 148 Nm, while the 2.0-liter naturally aspirated engine has a maximum power of 116 kW and a maximum torque of 202 Nm.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.