···
Log in / Register

What is the battery model of Changan CS35?

6Answers
LeEmery
08/27/2025, 10:01:43 PM

Changan CS35 uses a maintenance-free battery with the model number 6QWlz60 (550) (L2350), rated at 12V voltage and 60Ah capacity. Car batteries, also known as storage batteries, are a type of battery that converts chemical energy into electrical energy. Typically, the term 'battery' refers to lead-acid batteries, which are mainly made of lead and its oxides, with sulfuric acid solution as the electrolyte. The Changan CS35 is the first SUV independently developed by Changan Automobile, with body dimensions of 4160mm in length, 1810mm in width, and 1670mm in height, and a wheelbase of 2560mm.

Was this review help?
109
Share
Jackson
09/09/2025, 03:29:45 AM

As a long-time owner of the Changan CS35, I have personally experienced battery replacement. The original battery model is typically a 12V 60Ah Q85 or 55D23L, designed with standard dimensions to perfectly fit the engine compartment. Why this specific model? Because it provides sufficient starting current to support engine ignition while also meeting the power demands of in-car electronic devices like air conditioning and audio systems. In my routine maintenance, I make it a habit to check the terminal connections every quarter for any looseness or signs of oxidation—a light brushing can prevent contact issues. Additionally, avoiding frequent short trips with constant starts and stops helps prevent rapid battery drain; I recommend taking a longer drive for about half an hour to recharge the battery. During cold winter months when starting difficulties are common, I ensure all non-essential electrical devices are turned off when parked to conserve power.

Was this review help?
11
Share
Expand All
DiSimon
10/23/2025, 04:21:44 AM

I'm a car modification expert who has been closely following the performance details of the Changan CS35. Its battery typically uses a 12V 60Ah model like the L2-400, which is compact in size and offers high cost-performance, ensuring smooth and powerful engine starts. Battery specifications may vary slightly across different model years—for instance, post-2018 models upgraded to maintenance-free types to reduce upkeep hassles. When selecting a battery, prioritize size compatibility and sufficient capacity for daily use to avoid recurrent burnout issues caused by undersized units. I routinely check voltage with a multimeter; a healthy reading should hover around 12.5V—replace immediately if it drops below 11V to prevent breakdown risks. When installing additional equipment like auxiliary LED lights, always verify the battery's maximum output current to prevent overload or short-circuit hazards.

Was this review help?
2
Share
Expand All
SanVivian
12/06/2025, 03:45:09 AM

As a practical daily user, I clearly remember that the battery model for the Changan CS35 is 12V 60Ah, such as Q85 or 55D23L. The original design can save a lot of trouble. Battery maintenance is simple and practical—just regularly clean the dust with a damp cloth. Don’t underestimate this step, as it can extend the battery’s lifespan and prevent corrosion. Insufficient power often occurs during cold starts. If there’s no response when turning the key, avoid repeated attempts and instead use a jump start to protect the battery from burning out. For safety, I always carry an emergency toolkit, including jumper cables, to prevent the hassle of stalling midway. Different driving habits also have an impact—frequent start-stop cycles accelerate wear and tear, so adjusting trip planning can save both power and money.

Was this review help?
12
Share
Expand All
DelCarlos
01/26/2026, 10:12:31 PM

As a safety-conscious average driver, choosing the right battery for my Changan CS35 is crucial. The original model is typically a 12V 60Ah like L2-400, ensuring reliable ignition and reducing breakdowns. The average battery lifespan is 2-3 years. During inspections, first check for blue-white corrosion on the terminals; cleaning with soda water can resolve most contact issues. With significant temperature differences between winter and summer, battery performance fluctuates drastically, so I proactively replace it to prevent failures. In emergencies, don't panic if the battery dies—pull over safely, turn on hazard lights for assistance, then check for power drains like an unclosed trunk light accelerating discharge. When replacing, match the rated capacity; too small slows starts and harms the car, while too large wastes space.

Was this review help?
15
Share
Expand All
CourtneyLee
04/22/2026, 03:24:39 AM

As a budget-conscious car owner, the Changan CS35 battery with the 12V 60Ah Q85 model is very cost-effective. The original size fits perfectly without requiring additional modifications, and replacement costs are generally around 300 yuan, which can be handled by regular repair shops. Simple and easy-to-follow tips for extending battery life include turning off all electronic devices when parked to reduce static power consumption and avoiding leaving lights on overnight to prevent battery drain. Taking a short 20-minute drive weekly allows the battery to recharge automatically. When selecting a new battery, check the specifications to ensure the Cold Cranking Amps (CCA) value meets the standard, typically around 600A or higher for quick ignition. If you occasionally experience slow starts, don’t rush to replace the battery—try using a home charger for a slow 24-hour charge first to test recovery potential and save on repair costs.

Was this review help?
8
Share
Expand All
More Q&A

What is the Difference Between Direct Injection and Electronic Fuel Injection in Cars?

The differences between direct injection and electronic fuel injection in cars are as follows: 1. Fuel injection method: Electronic fuel injection sprays fuel into the engine's intake manifold, while direct injection sprays fuel directly into the engine's cylinder. 2. Different installation positions of the fuel injector: In multi-point electronic fuel injection, the injector is installed at the end of the intake manifold, and the fuel spray is directed into the intake ports of each cylinder; the air-fuel mixture is formed outside the cylinder. In direct injection, the injector is installed on the cylinder head, spraying fuel directly into the cylinder; the air-fuel mixture is formed inside the cylinder. 3. Different fuel injection pressures: Multi-point electronic fuel injection operates at pressures between 2.5bar and 4bar, while direct injection operates at pressures between 40bar and 400bar. 4. Different fuel supply system compositions: Multi-point electronic fuel injection does not have a high-pressure fuel pump, whereas direct injection includes one. 5. Different fuel injection start angles and durations: Due to lower injection pressures, multi-point electronic fuel injection requires a longer injection time under heavy loads, and the next injection cycle may need to start after the intake valve closes. However, direct injection occurs after the intake valve opens and can take place during both the intake and compression strokes. Direct injection lowers the cylinder temperature at the moment of compression, aiding in the cooling of the piston and cylinder liner, thereby reducing the engine's tendency to knock. As a result, direct injection engines can achieve a higher compression ratio, leading to improved thermal efficiency.
115
Share

What is the fuel consumption of the CR-V 2.4L 4WD Luxury Edition?

CR-V 2.4L 4WD Luxury Edition has a fuel consumption of 11.2L/100KM. Below are the detailed specifications of the Honda CR-V: 1. Drivetrain: The Honda CR-V comes in two versions: a two-wheel-drive model and a four-wheel-drive model. The four-wheel-drive version features a front-engine, four-wheel-drive system with an on-demand all-wheel-drive configuration. 2. Powertrain: The Honda CR-V is equipped with two i-VTEC engines: a 2.0L and a 2.4L. The 2.0L engine delivers a maximum power of 114kW and a peak torque of 190N·m, while the 2.4L engine produces a maximum power of 140kW and a peak torque of 222N·m. 3. VTEC Technology: The Honda CR-V features VTEC engine technology, which stands for Variable Valve Timing and Lift Electronic Control System. Unlike conventional engines, VTEC engines differ in the number and control method of camshafts and rocker arms, featuring two distinct sets of valve drive cams for low-to-medium and high-speed operations, with automatic switching via electronic control. The VTEC system allows the engine to automatically adjust valve opening timing and lift based on driving conditions, thereby altering intake and exhaust volumes. This results in increased power output, reduced fuel consumption, and lower emissions.
108
Share

Will I Get Penalized for Driving with the Trunk Open While Carrying Items?

Driving with the trunk unclosed and in an open state is considered a traffic violation. Typically, traffic cameras do not capture this type of violation. However, if spotted by traffic police, the vehicle may be stopped, and a ticket will be issued for violating road traffic safety laws and regulations regarding road usage. Below are some precautions regarding the trunk: 1. Avoid storing flammable and explosive items: As the trunk is an enclosed space, temperatures can rise rapidly. Storing lighters, hairspray, or other flammable and explosive items in the trunk, especially during summer heat and long-distance travel, can lead to explosions with unimaginable consequences. 2. Avoid storing valuables: Keeping valuables, premium cigarettes, or fine liquor in the trunk is highly unsafe. Thieves are cunning, and it is absolutely inadvisable to leave valuables in the car trunk.
110
Share

Is Half Engagement Stepping on the Clutch Halfway?

Half engagement is stepping on the clutch halfway. Here is an introduction to half engagement: 1. Introduction: Clutch half engagement refers to the unstable connection state of the clutch, where the driver presses the clutch pedal, gradually reducing the pressure of the clutch pressure plate, causing the driving plate and the driven plate to be in a state of both rotating and slipping. During the field driving test, drivers who are not yet proficient in operation and cannot complete the required actions within the specified time often use half engagement to reduce the vehicle speed, thereby extending the operation time. However, the rules for off-field driving tests do not allow the use of half engagement. 2. Half Engagement: Half engagement is when the clutch is between disengaged and engaged, and the transmission system is between connected and disconnected, providing a flexible power source. It is frequently used in complex road conditions, as well as during starting, turning, and short-distance following. When the clutch is in the half engagement state, the friction between the pressure plate and the friction disc is minimal.
103
Share

How to Turn on the Cold Air in the 7th Generation Accord?

The cold air in the 7th generation Accord can be turned on by pressing the A/C button. AUTO means to turn on, press it once, and the fan will start working. Here are more related introductions: 1. Air Conditioning Cooling Principle: After the air conditioner is powered on, the low-pressure steam of the refrigerant in the refrigeration system is sucked in by the compressor and compressed into high-pressure steam, which is then discharged to the condenser. At the same time, the outdoor air sucked in by the axial fan flows through the condenser, taking away the heat released by the refrigerant, causing the high-pressure refrigerant steam to condense into high-pressure liquid. It exchanges heat with the outdoor air to become medium-temperature and medium-pressure refrigerant liquid, which then enters the evaporator after being throttled and depressurized by the capillary tube, evaporating under the corresponding low pressure and absorbing the surrounding heat. 2. Air Conditioning Buttons: The left and right sides respectively adjust the cold and hot air for the driver and passenger. Blue represents cold air, and red represents hot air. Adjust both sides to the lowest blue area, which means pressing the blue button to the lowest state, and then press the A/C air conditioning switch button once.
109
Share

What Should You Ask the Dealer for When Buying a New Car?

When purchasing a new car, you should request complimentary items from the dealer such as window tinting, floor mats, small gifts like cakes and perfumes, full-coverage floor mats, and reflective vests for the vehicle. Below is an introduction to related automotive content: 1. Determining Factors: The quality of a vehicle's handling is primarily determined by three factors: power, suspension, and steering system. 2. Detailed Introduction: Power is the foundation of handling. Only with strong and smooth power output can a vehicle qualify to discuss handling; Suspension is the key to handling. Generally speaking, for two cars with similar power, the difference in handling depends on the suspension. A solid and resilient suspension ensures stable and reliable handling.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.