···
Log in / Register

What is the battery model of BYD Song MAX?

6Answers
SophieLee
07/29/2025, 07:34:11 AM

BYD Song MAX battery is located at the upper left of the engine compartment. The original battery is Sail brand, with specifications of 12V70Ah-CCA (SAE) 570A. Below is the relevant introduction: Check the battery condition once a month, and inspect the degree of terminal corrosion. If there is a certain degree of corrosion on the terminals, apply baking soda water to the terminal surface. Bubbles will appear, and the baking soda water will gradually turn brown. After the bubbles stop appearing, rinse with clean water and dry with a cloth. Finally, apply grease to the terminal surface to prevent corrosion.

Was this review help?
102
Share
DiMaria
08/13/2025, 03:31:32 PM

I remember last time I replaced the battery of my BYD Song MAX by myself. The standard model is a 12V 55B24L lead-acid battery with a capacity of about 60 ampere-hours. This model is quite common, and brands like VARTA or Fengfan are compatible. If the model doesn't match, there could be issues with starting the car, making ignition more difficult. It's recommended to regularly check the battery terminals for corrosion and clean them with a cloth to extend their lifespan. Also, avoid leaving the car parked for long periods without driving, as this can cause the battery to discharge too quickly. I usually check the voltage every two years to ensure it stays above 12.6 volts. If the battery is found to be weak, charge it or replace it promptly. When getting a new battery, it's best to choose one with the original specifications to avoid affecting other electronic components. Overall, the correct model ensures smooth driving.

Was this review help?
17
Share
Expand All
DelRonan
08/13/2025, 03:33:13 PM

As a mechanic, the BYD Song MAX typically uses a 12-volt 55B24L specification battery, around 60 ampere-hours. This lead-acid battery requires regular maintenance. I remind car owners to check the electrolyte level and top it up with distilled water to keep it full. If the model is incorrect, the battery can easily overcharge and burn out, even leading to starting failure. It is recommended to use a multimeter to test the voltage every three months, keeping it between 12.4 volts and 12.7 volts. When replacing, ensure the terminals are securely connected to avoid sparks caused by looseness. I also recommend choosing an anti-rust model battery to reduce the risk of leakage. In case of aging, do not delay the replacement. Overall, the correct model is the foundation of driving safety.

Was this review help?
5
Share
Expand All
EllaAnn
10/08/2025, 01:05:51 AM

I place great emphasis on energy-efficient living. The BYD Song MAX typically uses a 12V 55B24L lead-acid battery. I believe choosing eco-friendly brands is crucial, and when recycling old batteries, it's important to go to professional facilities to avoid environmental pollution. Additionally, I recommend minimizing the use of additional electrical devices while driving, such as air conditioning and audio systems, to prevent rapid discharge and shortened battery life. Regular charging ensures efficient operation, as low voltage can affect fuel consumption. If upgrading the battery, opting for a long-life model can reduce replacement frequency. In summary, the correct battery model can enhance sustainable mobility.

Was this review help?
3
Share
Expand All
LeGrant
11/21/2025, 01:25:16 AM

The battery of the BYD Song MAX is crucial for daily commutes. The standard model is 12V 55B24L, with a capacity of around 60Ah. If the model is incorrect, the car may experience stuttering during morning starts. I once encountered a battery drain issue, which was resolved by timely replacement. For regular maintenance, I make it a habit to clean dust off the battery to reduce heat buildup. It's advisable to disconnect the negative terminal when parking for extended periods to prevent discharge. Additionally, check if the fan and alternator are functioning properly, as abnormal voltage can accelerate aging. After replacement, always test to ensure stable power supply for safe driving.

Was this review help?
5
Share
Expand All
BradleyLynn
01/11/2026, 03:01:48 AM

For car upgrade enthusiasts, the BYD Song MAX comes with a factory-installed 12V 55B24L battery. However, during modifications, I've experimented with higher capacity options, such as 70Ah, to support more onboard devices. When replacing, it's crucial to check if the dimensions match to avoid space conflicts. I also installed a voltage monitor to display real-time status and prevent failures. For regular maintenance, I use a slow charger to extend battery life. While the correct model is fundamental, personalized adjustments can enhance the driving experience. It's advisable to choose high-quality brands to minimize replacement hassles.

Was this review help?
7
Share
Expand All
More Q&A

What does the yellow exclamation mark on the Toyota Levin dashboard mean?

There are four possible scenarios when a yellow exclamation mark appears on the car dashboard: general faults, automatic transmission faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these four situations: General Faults: A triangle with an exclamation mark inside indicates a malfunction in the car's general performance, components, or functions. Common causes include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant level below the normal range. The transmission fluid should be replaced promptly. Abnormal Tire Pressure: An exclamation mark inside a horizontal line under a bracket represents the tire pressure monitoring warning light. This light illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. There is also a red exclamation mark inside a circle with brackets, which represents a brake system warning, mainly indicating brake system failure or low brake fluid level. The brake system should be inspected immediately to avoid accidents.
102
Share

Do I need to press the unlock button every time I shift gears?

When shifting gears in an automatic transmission car, you must press the shift button for each gear change. Benefits of the button: The advantage of requiring a button to shift gears is to prevent accidental operation from affecting driving. For example, accidentally shifting from D to R while driving is very dangerous, so this shift button acts as a safety lock to prevent driver errors. Precautions for shifting gears: When shifting gears, the clutch and throttle must be coordinated properly. Press the clutch all the way down, then release the throttle pedal, and quickly shift to the corresponding gear. After shifting, release your hand immediately and avoid keeping it on the gear lever for a long time, as this can easily damage the gear lever.
112
Share

How many days does it take to check the traffic violation record on October 1st?

It takes 7-10 days to check the traffic violation record on October 1st. Methods for determining traffic violations: Traffic violations are determined through electronic monitoring. Behaviors captured by electronic surveillance require manual review, which typically takes about 72 hours to upload the record. After that, it will be synchronized to the Traffic Management 12123 platform, and it takes 3-7 working days to query the violation record. Non-on-site violations: Non-on-site violations (violations captured by cameras) take about 15 days to be checked. The time varies in different regions. Therefore, if car owners are worried about potential violations, they can check online for relevant information about a week after they suspect a violation.
118
Share

Do I need to keep pressing the brake when in N gear?

You don't need to keep pressing the brake when in N gear. N gear is neutral gear: In this gear, the transmission is also in a no-load state, but the vehicle can move. Unlike P gear, the transmission is not locked. Therefore, if you want to use the air conditioning while in N gear, you must engage the parking brake (handbrake) to prevent the vehicle from rolling. Definition of car braking: Braking, also known as stopping, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, other transport tools, or machinery. The general principle of braking is to fix a wheel or disc on the high-speed shaft of the machine and install a corresponding brake shoe, band, or disc on the machine base, which generates braking torque under external force.
108
Share

Why is the car air conditioner not heating?

If the car air conditioner is not heating, common causes include insufficient antifreeze. It is advisable to promptly replenish the coolant or check if the heater core is clogged. Introduction to Car Air Conditioning: The car air conditioning device (air-conditioning-device), commonly referred to as car air conditioning. Functions of Car Air Conditioning: It is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to an optimal state, providing a comfortable riding environment for passengers and reducing travel fatigue; it also creates favorable working conditions for the driver, serving as an important ventilation device for ensuring safe driving.
117
Share

What Causes the Red Oil Light to Illuminate?

Reasons for the red oil light illuminating: insufficient oil level, faulty pressure sensor, or oil pump malfunction. Insufficient oil level: The oil pump's output decreases, leading to a drop in oil pressure and the illumination of the oil pressure light. In this case, it is necessary to check if there are any leaks in the engine or if there is a fault causing oil consumption. Faulty pressure sensor: The oil pressure sensor itself may be faulty, causing the vehicle's computer to receive incorrect oil pressure data, thus triggering the oil pressure light. Alternatively, the wiring harness of the oil pressure sensor may have a fault, such as an open circuit or short circuit, leading to the illumination of the oil pressure light. Oil pump malfunction: The oil pump may be internally worn, causing the oil pump itself to malfunction and resulting in the illumination of the oil pressure light.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.