What is the battery model for Volkswagen Lavida?

2 Answers
LaClaire
07/29/25 2:59am
Volkswagen Lavida's original battery model is a 12V-60Ah Fengfan battery, and it can also use a Bosch battery with the model number L2-400. In daily use, it is important to maintain the battery properly. Here are a few key points to note: 1. If an unlocked car is parked for an extended period, it may cause the car battery to drain and the engine to fail to start; 2. To avoid damage to the car's electrical devices, never connect power accessories such as car battery chargers to the 12V socket or cigarette lighter; 3. If the key is left in the "ACC" position of the ignition switch for a long time with the engine off, it will lead to battery discharge; 4. Do not expose the battery to direct sunlight for prolonged periods, as strong ultraviolet rays can damage the battery casing.
Was this review help?
11
1
Share
SanAnastasia
08/12/25 6:53am
As a Lavida owner, I find battery issues to be quite common. The Lavida typically uses a 12V 60Ah AGM or EFB battery, such as the Varta H6 or similar specifications, depending on the model year. For example, the 2018 model might use the code 575 012 045 to identify it. When replacing the battery, it's crucial to choose the correct model; otherwise, the car may struggle to start or fail completely. I've replaced mine a few times and learned to regularly clean the electrode terminals to prevent corrosion, and to avoid leaving electrical devices on after turning off the engine to save power. In cold winter weather, battery performance drops faster, so it's best to park in a garage or warm up the car. Proper battery maintenance can make the car more durable and fuel-efficient. I recommend checking the voltage every two years. If you notice delayed starting sounds, take action immediately—don't wait until you're stranded on the road. Getting the battery replaced at a professional shop is safe and hassle-free, and it can also extend the lifespan of other electrical components.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

Where is the hood release handle on a BMW Mini?

Opening the car hood is a frequently performed operation during vehicle use, whether for routine maintenance or troubleshooting. Car Hood: Opening the car hood is a common operation in vehicle usage, whether for daily maintenance or fault inspection. It's essential to know how to open the car hood yourself. The method to open the hood is generally the same for almost all cars—you just need to locate the control switch inside the vehicle. Specific steps are as follows: First, open the car door and enter the driver's seat. Locate the hood release switch under the left side of the driver's seat. Then, pull it upward firmly to release the hood latch. You will hear a 'click' sound, indicating the latch is released. After that, step out of the car to check if the front hood is slightly open—a visible gap means it's unlocked. Finally, move the safety catch aside to fully open the hood. Lift the support rod and secure its top clip onto the hood to hold it in place.
3
3
Share

What are the reasons for the decrease in braking force of hydraulic retarders?

The reason for the decrease in braking force of Voith hydraulic retarders is: current drop: an increase in the gap between the stator and rotor or prolonged operation time may lead to a decrease in braking force. The following are related content introductions: 1. Retarding efficiency: The retarding efficiency is higher than that of engine retarders, allowing downhill driving at higher speeds; small size and mass, can be integrated with the transmission. 2. Wear: No wear occurs during operation; the heat generated by the working fluid is easily dissipated, and the normal working temperature of the engine can be maintained during long downhill driving. 3. Braking torque: The braking torque tends to zero at low speeds, and wheels will not slip during braking on slippery roads. The disadvantages are long lag times for engagement and disengagement, power loss when not in operation, and complex structure when used in mechanically driven vehicles, especially in trailers.
12
4
Share

Should Vehicles Drive on the Right Side in China?

According to China's Road Traffic Safety Law, motor vehicles and non-motor vehicles must drive on the right side, while pedestrians should walk on sidewalks. If there are no sidewalks, pedestrians should walk on the side of the road. Based on road conditions and traffic needs: Roads are divided into motor vehicle lanes, non-motor vehicle lanes, and sidewalks. Motor vehicles, non-motor vehicles, and pedestrians must travel in their respective lanes. If the road is not divided into motor vehicle lanes, non-motor vehicle lanes, and sidewalks, motor vehicles should travel in the middle of the road, while non-motor vehicles and pedestrians should travel on both sides. When driving on the road: Motor vehicles must not exceed the maximum speed indicated by speed limit signs. On roads without speed limit signs, drivers must maintain a safe speed. When driving at night, on dangerous road sections, or in adverse weather conditions such as sandstorms, hail, rain, snow, fog, or icy roads, drivers should reduce their speed.
4
2
Share

What are the precautions for car maintenance?

Precautions for car maintenance include: 1. Air conditioning must be cleaned and maintained: In summer, the air conditioning operates under high load, and frequent rain means cars often drive through waterlogged roads, causing the lower part of the air conditioning condenser to accumulate mud and sand. Over time, this can lead to rust on the condenser, shortening its lifespan. Therefore, a thorough maintenance of the air conditioning system should be performed in autumn. Additionally, pay attention to the maintenance of the heater pipes and fan. As the weather cools in autumn, frost may appear when temperatures drop. During this season, it's crucial to ensure that the defrost vents below the windshield are functioning properly and providing sufficient heat. If any issues arise, they should be addressed promptly to avoid unsafe driving conditions. 2. Replace tires with shallow treads in time: High summer temperatures require frequent checks of tire pressure to prevent overinflation and blowouts. In autumn, as temperatures drop, tire pressure should be replenished to maintain it within the specified range. Also, inspect tires for scratches, as rubber tends to harden in autumn and winter, making tires more prone to leaks or punctures.
6
2
Share

How Many Kilometers for One Regeneration Under China VI Standards?

When the vehicle has completely consumed two tanks of gasoline, the regeneration indicator light on the dashboard will illuminate. Regeneration typically takes about 5 minutes, though the required time may vary for different vehicle models. During regeneration, it is advisable to find a well-ventilated and open area. After pressing the regeneration button, the vehicle will automatically increase its RPM to process, requiring no driver intervention. China VIa: China VIa serves as a transitional phase between "China V" and "China VI" standards. China VIa will be implemented for gas-powered vehicles on July 1, 2019, for urban vehicles (such as city buses, sanitation trucks, postal vehicles, etc.) on July 1, 2020, and for all vehicles on July 1, 2021. China VIb: China VIb represents the true "China VI" emission standard. China VIb will be implemented for gas-powered vehicles on January 1, 2021, and fully implemented for all vehicles on July 1, 2023.
12
5
Share

Where is the folding motor for the Subaru Outback's side mirror located?

The folding motor for the Subaru Outback's side mirror is located at the junction between the mirror's tail and the car body. Subaru Outback Classification: The side mirror folding function refers to the ability of the car's side mirrors to fold and retract when necessary, which can be either manual or electric. Function and Purpose: During driving, vehicles are prone to minor accidents. As the widest component installed on the vehicle, side mirrors are most susceptible to impact in case of a scrape. To minimize damage, side mirrors need to have a folding function. Folding side mirrors can retract when passing through narrow sections, improving the vehicle's maneuverability. When the driver leaves the car, the side mirrors can also be folded, not only protecting the mirror surface but also reducing parking space, effectively avoiding scratches. Subaru Outback Advantages: The advantage is that the driver can fold the mirrors from inside the car, and the mirrors automatically unfold when the vehicle is started.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.