···
Log in / Register

What is the battery model for the Volkswagen Bora car key?

3 Answers
MacJoanna
09/07/25 3:48am
The battery model for the Volkswagen Bora car key is CR2032. CR2032 is a lithium manganese dioxide battery, named according to the IEC standard. The breakdown is as follows: C - Indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode. R - Indicates the battery shape is cylindrical; if it were square, it would be denoted by F. 20 - Indicates the battery diameter is 20mm. 32 - Represents the battery height of 3.2mm. The nominal voltage is 3.0V, with an endpoint voltage of 2.0V. The rated capacity ranges between 200-240mAh, varying by manufacturer. The shelf life of a CR2032 is typically 5 years, though this can be significantly shorter if the manufacturer's production standards or quality control are poor. Domestic first-tier brands generally guarantee this lifespan. Under ideal conditions (sealed, room temperature, no moisture, etc.), the lifespan can extend to 8 years or even 10 years. Generally, replacing a car key battery involves just three steps: Step 1: Remove the mechanical key. Press the lock button on the side of the smart key to release the mechanical key. Step 2: Open the battery cover. After removing the mechanical key, you will see a deep slot and a shallow slot at the top of the smart key. The deep slot is for the keyhole, while the shallow slot is used to open the battery cover. Insert the mechanical key into the shallow slot and pry it open to reveal the coin cell battery. Gently push the battery to remove it. Step 3: Replace the battery. Insert the new battery, then reattach the battery cover and mechanical key to complete the replacement.
Was this review help?
14
2
Share
SanPresley
09/19/25 3:14am
I've been driving a Volkswagen Bora for several years and have replaced the key battery multiple times. The battery model is the CR2032 button cell, which can be easily purchased at supermarkets or hardware stores at a low cost. The first time I replaced it, I was a bit nervous because the key casing shouldn't be pried open forcefully. Instead, you should gently press it open with a thin tool or your fingers to avoid scratches. When installing the new battery, make sure to align the positive side correctly. There's a small mark on the old battery where the letters CR2032 are located—don't install it backward, or the remote might stop working. The battery typically lasts one to two years, so if the door doesn't respond as sensitively, it's time to check it. By the way, other Volkswagen models also use this battery type, which is very convenient. I recommend checking the battery status during regular car maintenance instead of waiting until it's urgently needed. Test the remote before heading out.
Was this review help?
1
5
Share
Expand All
DeLondyn
11/02/25 3:36am
As a car enthusiast, I've handled many models, and the Volkswagen Bora key battery is uniformly CR2032, a standard button cell with strong universality. Replacing it yourself is incredibly simple: press the key button to pop out the spare key, then use a plastic piece to pry open the casing and directly replace the battery. Be careful not to damage the small internal chip, just ensure the battery is placed in the correct orientation. Battery lifespan depends on usage frequency, averaging a replacement every two years. When buying batteries, opt for reputable brands like Nanfu or Energizer, costing just a few bucks. If the key's remote range decreases or the signal weakens, it's time to act. This DIY approach saves money and is quick, so don't rely on repair shops. A little tip: after removing the old battery, double-check the model CR2032 to confirm before proceeding.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

What to Do When Wiper Blades Don't Clean Properly?

Here are the reasons why wiper blades don't clean properly: 1. Dirty windshield: Inadequate cleaning of the windshield during regular car washes can leave sticky particles on the glass, preventing the wiper from cleaning effectively and potentially damaging it. The solution is to visit a car wash for a thorough windshield cleaning. 2. Hardened wiper blades: Aging wiper blades can harden. You can replace them with new ones or clean the wiper with a lubricant. 3. Misaligned wiper arm: Adjust the angle of the wiper arm. Use an adjustment wrench to hold the wiper and gently rotate it to align it properly, or seek professional help at a repair shop. 4. Frozen wiper blades: Wiper blades, usually made of rubber, can freeze and harden in cold winter temperatures. After starting the car, direct some warm air to the windshield to raise its temperature slightly before using the wipers.
20
3
Share

How to Deal with Frost on Cars in Winter?

Here are the methods to handle frost on cars in winter: 1. Turn on the car's air conditioning and set it to external circulation or direct the vents toward the windows. 2. Use a specialized plastic scraper for removing frost and snow from vehicles, gently scraping the frost off the glass in one direction. A bank card can also serve as a substitute, but be careful to avoid scratching the glass. 3. Apply a specialized vehicle defroster spray onto the frosted windows. Vehicle defroster sprays are high-speed anti-ice concentrated solutions designed to thaw frozen windows and wipers without damaging the car's surface, and they help prevent re-freezing. 4. Use a dedicated frost cover to shield the car. 5. Open the car doors to ventilate and equalize the temperature inside and outside the vehicle.
13
0
Share

How to Turn On the Rear Window Wiper?

The method to turn on the rear window wiper mainly includes: 1. Adjust the wiper switch forward and backward to switch between front and rear wipers, and adjust up and down to change the wiper speed. 2. Push the wiper switch one notch toward the driver to adjust the front windshield wiper, and push another notch to activate the front windshield cleaning function. 3. Push the switch one notch toward the front of the car to adjust the rear glass wiper, and adjust the wiper speed by moving it up and down after pushing the notch. Additional note: It is recommended not to use the rear window wiper frequently because the rear window is more prone to accumulating dust and dirt, and it does not have a cleaning function. Using it on non-rainy days may cause scratches on the glass.
15
1
Share

How to reset the maintenance light on the Jetour X90?

Here are the steps to reset the maintenance light on the Jetour X90: 1. Turn off the ignition switch and hold down the mode switch. 2. Turn on the ignition switch and then release the mode switch. 3. Within 30 seconds, simultaneously press the mode switch and the clock switch (press time < 2s), and the maintenance light will be reset. Here are the reasons why the engine maintenance light may illuminate on the Jetour X90: 1. Carbon deposits in the intake tract or on the piston top can cause poor atomization, leading to incomplete combustion and triggering the pollution light. 2. Faults in the sensor or the computer board itself can cause the pollution light to illuminate.
14
2
Share

What are the power specifications of the Lynk & Co 03+?

The Lynk & Co 03+ is equipped with a 2.0T turbocharged engine. The 03+ features a high-power version of the 2.0T turbocharged engine, which delivers a maximum power output of 187kW. As the first high-performance model launched by Lynk & Co, the 03+ boasts a maximum torque of 350Nm, paired with an 8-speed automatic transmission that matches the engine perfectly. Additional Information: While pursuing speed and handling, the Lynk & Co 03+ also provides enhanced safety protection. It comes with globally leading active and passive safety systems and utilizes BorgWarner's fifth-generation intelligent sports all-wheel-drive system to ensure vehicle stability.
1
0
Share

Which Lights to Use in Heavy Fog?

In heavy fog, you should turn on the fog lights. If visibility is extremely low, you should also activate the hazard warning flashers. Driving in foggy conditions significantly reduces visibility and limits the driver's line of sight. Fog lights have strong light penetration, which can enhance visibility for both the driver and other road users, allowing approaching vehicles and pedestrians to spot each other from a greater distance. Fog lights are divided into front fog lights and rear fog lights. Front fog lights are typically a bright yellow color, while rear fog lights are red. The symbol for front fog lights features downward light beams, whereas the rear fog light symbol shows parallel beams. In foggy weather, both front and rear fog lights are usually used together. Fog lights are highly bright and penetrating, and they do not cause diffuse reflection due to fog. Therefore, using them correctly can effectively prevent accidents.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.