···
Log in / Register

What is the battery model for the Regal?

4 Answers
DeLola
07/30/25 1:05am
The original battery for the Buick Regal is the L2-400 model, a genuine accessory battery provided by SAIC-GM. Here are some additional details: 1. This battery is a fully sealed, maintenance-free type with a long service life, excellent performance, and high reliability, ensuring smooth travel every time. 2. In harsh conditions, it offers superior low-temperature starting and voltage stabilization effects, providing better voltage support for all electronic devices in the vehicle. Additional information: The typical service life of a Buick Regal battery is 2 to 3 years. However, to ensure trouble-free travel, the battery terminals should be checked during every oil change to ensure stability. Additionally, the battery charge should be inspected regularly. Most vehicles come with maintenance-free batteries. When replacing the battery, the new one should have the same part number as indicated on the original battery's label.
Was this review help?
14
2
Share
StHeidi
08/15/25 6:36am
The Buick Regal's battery model is generally an H6 AGM or Group 48 size battery, depending on your vehicle's year. I drive a 2018 Regal, and the battery label shows H6, with a capacity of 90Ah and a cold cranking current of around 800A, suitable for the start-stop system. Older models, like those before 2010, might use standard lead-acid batteries, but AGM batteries are more durable and energy-efficient. To verify the model, check the label on the side of the battery under the hood or refer to the electronic version of the owner's manual. I often remind friends not to buy the wrong model, especially for start-stop versions, as they have higher battery requirements; otherwise, the battery drains quickly. Regularly clean the terminals to prevent rust and test the voltage every two years—this can extend the battery's lifespan to about five years. Choose brands like ACDelco or Varta that match the original specifications.
Was this review help?
11
2
Share
Expand All
OClara
10/20/25 5:05am
In auto repair shops for many years, the commonly seen Regal battery is the H6 AGM type, especially for models with start-stop systems after 2015, with a Group 48 size and approximately 90Ah capacity. The model number is engraved on the battery label and can be identified at a glance—do not mix it with regular batteries. The CCA (Cold Cranking Amps) value should be above 700A; anything lower may cause starting difficulties. During inspections, a normal voltage reading should be 12.6V. If the battery is found to be undercharged, replace it early to avoid damaging the starter. Customers often overlook terminal corrosion—cleaning off rust with a toothbrush can extend the battery's lifespan. It is recommended to replace it with a new one matching the original factory specifications, typically costing between 500-1000 RMB. Safety first—don’t take risks by delaying.
Was this review help?
16
2
Share
Expand All
MacJoshua
12/03/25 5:37am
Researching car modifications, the majority of Regal battery models are H6 AGM, which became popular starting from the 2017 model year, equipped with start-stop systems supporting high current output. Older models may use regular battery types. Quick lookup methods include checking the manual or battery label. AGM batteries are maintenance-free but more expensive, with advantages being durability and less leakage. My experience suggests choosing a CCA rating above 650A and ensuring precise dimensions to avoid modification issues. Simple maintenance includes testing the battery charge monthly and disconnecting power when parked to prevent drainage. Model differences are minor, the key is matching the vehicle's requirements.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

What is the reason for the squeaking sound when accelerating?

It may be because the belt is slipping on the generator, causing intense friction and vibration between the belt and the pulley, resulting in a noise at a certain frequency. Here are the relevant explanations: 1. Throttle: The throttle, also known as the "air valve" or "butterfly valve," refers to the control device that regulates the engine's power (thrust). In piston-type aircraft engines, the throttle controls the opening of the carburetor's butterfly valve to regulate the cylinder's filling volume, thereby determining the engine's output power. 2. Timing Belt: The timing belt is an important component of the engine's valve system. By connecting to the crankshaft and maintaining a specific transmission ratio, it ensures the accuracy of the intake and exhaust timing.
17
5
Share

What are the penalties for reverse parking on the roadside?

Reverse parking on the roadside results in a 3-point deduction. Below is an introduction to relevant road traffic regulations: 1. Right-side driving: Motor vehicles and non-motor vehicles must drive on the right side. 2. Reverse driving: Driving a motor vehicle in the opposite direction results in a 3-point deduction; reversing on highways results in a 12-point deduction. Here is extended information on the point deduction standards for reverse driving: 1. If a motor vehicle driver commits any of the following violations, 12 points will be deducted: Reversing, driving in the opposite direction, or making a U-turn across the central divider on a highway. 2. If a motor vehicle driver commits any of the following violations, 3 points will be deducted: Overtaking, yielding, or driving in the opposite direction without following regulations. 3. Penalties for reverse driving as stipulated in Article 90 of the Road Traffic Safety Law: Motor vehicle drivers who violate road traffic safety laws and regulations regarding road usage will be given a warning or fined.
12
1
Share

What does the automatic locking of the Audi A4L mean?

The automatic locking feature of the Audi A4L is called speed-sensing automatic locking, which is an electronic device. When the vehicle speed reaches a preset value by the computer, the lock button on the door will automatically engage to prevent accidental opening of the door. Below is relevant information about automatic locking: 1. Automatic locking while driving means that when the vehicle speed reaches a preset value, the door locks automatically engage. The preset value is usually set by the manufacturer, typically between 10-20 km/h. Advantages of automatic locking: Anti-theft, as the doors lock shortly after starting to drive, preventing door pull robberies during traffic jams or at red lights; it also protects children inside the vehicle by preventing them from opening the doors while the car is in motion. 2. If the vehicle does not come with an automatic locking feature, or even if it does, it is advisable to enhance your active safety awareness. Always lock the doors immediately after getting in the car before driving. When transitioning from complex urban roads to ring roads, closed roads, expressways, or highways, remember to activate the central locking system. Developing good habits and not being afraid of minor inconveniences can significantly enhance your safety.
10
4
Share

What Are the Reasons for Difficult Gear Shifting in the Transmission?

Transmission shifting difficulties are caused by the following reasons: 1. If the gear lever operation is heavy or requires deviation from the gear position to engage, these are caused by faults in the control mechanism. If it is due to mechanism misalignment, the length and position of the linkage should be adjusted as specified; if it is due to component wear or deformation, the worn parts should be replaced. 2. If the gear feels correct but there is difficulty or slight noise when shifting into second, third, fourth, or fifth gear, it indicates a damaged synchronizer, mostly caused by reduced wear effectiveness. 3. During operation, if abnormal noise is heard in the transmission when coasting in neutral, and the same noise occurs at the moment of shifting, along with difficulty in shifting, the cause is mostly loose synchronizer components. 4. If there is difficulty in shifting into fourth or fifth gear, accompanied by a double-shift sensation, it is due to excessive wear of the shift fork and fork groove or deformation and failure of the synchronizer cone ring.
12
2
Share

What is the purpose of adding windshield washer fluid to a car?

1. Cleaning performance: Windshield washer fluid is formulated with various surfactants and additives. Surfactants typically have functions such as wetting, penetrating, and solubilizing, thereby achieving the effect of cleaning and removing dirt. 2. Anti-freezing performance: The presence of alcohol and ethylene glycol in the windshield washer fluid significantly lowers the freezing point of the liquid, thus providing anti-freezing effects and quickly dissolving frost. 3. Anti-fogging performance: The windshield washer fluid forms a single-molecule protective layer on the glass surface. This protective film prevents the formation of fog droplets, ensuring the windshield remains clear and transparent with a clear field of vision. 4. Anti-static performance: After cleaning with windshield washer fluid, substances adsorbed on the glass surface can eliminate static charges on the glass. 5. Lubricating performance: The ethylene glycol in the windshield washer fluid has high viscosity, which provides lubrication, reduces friction between the wiper and the glass, and prevents scratches. 6. Anti-corrosion performance: The windshield washer fluid contains various corrosion inhibitors, which are completely safe and non-corrosive to all types of metals, car paint, and rubber.
7
5
Share

What Causes the Sunroof Noise in the Lamando?

Reasons for sunroof noise in the Lamando: 1. Aging sunroof rubber seal or gasket: The sunroof seal is exposed to rain or sunlight for extended periods, making it prone to aging. Rubber conditioner can temporarily restore the seal's performance. 2. Loose sunroof screws: Loose screws may cause roof noise and sunroof noise, and even pose a risk of the sunroof detaching. 3. Dust particles in the sunroof track: Repeated opening and closing of the sunroof inevitably leads to dust accumulation in the track gaps. When dust builds up to a certain level, friction occurs during operation, resulting in noise. Use a towel to remove the dust, and regular maintenance is essential.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.