What is the battery model for the Peugeot 308?

Where Should a Dash Cam Be Installed?

A dash cam should be installed below the interior rearview mirror and connected to it, or mounted on the back of the interior rearview mirror. After installation, adjust the angle from the driver's position. A dash cam is a device that records images, sounds, and related information during vehicle travel. Installing a dash cam in a car allows for the recording of the entire driving process, including video and audio, which can serve as evidence in traffic accidents. The basic components of a dash cam include: 1. The main unit; 2. A speed sensor; 3. Data analysis software; 4. An infrared camera. To turn the dash cam on or off, press and hold the power button. It automatically turns on when connected to a charger and delays for 5 seconds before automatically turning off when the charger is disconnected by the owner.

2

Share

Why does the car move backward when in drive gear?

Because the engine's power and the reverse motion resistance of the transmission shaft are absorbed by the torque converter. Here are the specific details of related content: 1. Possible causes: It may be caused by a faulty transmission gear position sensor, valve body failure, or shift mechanism malfunction. Essentially, rolling backward on a slope means the car doesn't have enough power to climb, causing it to roll back. Alternatively, if the car is heavily loaded, the resistance might exceed the engine's output power. 2. Solutions: Automatic transmissions usually have a delay of more than 1 second! After shifting into drive gear, do not release the brake immediately, and the car won't roll backward. When rolling occurs, the correct approach is to brake promptly. If equipped with a hill-start assist system, wait for the system to function properly before starting again.

11

0

Share

How to Deal with Whitening of Exterior Plastic on Cars?

Solutions for whitening of exterior plastic on cars: 1. Use dashboard wax, which is typically applied to the dashboard or plastic parts for polishing. Using dashboard wax on whitened exterior plastic is both time-saving and labor-saving; 2. Use coating care agents, which can have a great effect on plastic parts. Whitened or dull plastic parts can be maintained with coating care agents; 3. Use shoe polish to cover it up. For black plastic parts that have whitened, black shoe polish works well and is convenient to use; 4. For wax that has stuck due to waxing, it can be removed with tar asphalt cleaner or by gently wiping repeatedly with a towel dipped in all-purpose water. Whitening of exterior plastic on cars is irreversible. Once whitened, it can only be concealed with maintenance products and cannot be maintained for long. It is recommended to regularly maintain the plastic parts both inside and outside the car.

4

3

Share

How to Remove the Gear Panel of a Camry?

The method to remove the gear panel of a Camry is to gently pry it open by inserting a utility knife into the gap. Traditional car gear panels are primarily made of plastic, so protective measures should be taken during removal to avoid scratching the panel. Taking the 2018 2.5Q Flagship Edition Camry as an example, the vehicle's body dimensions are 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. It has a maximum power output of 154kw and a maximum torque of 250nm. The engine model equipped in this car is A25A, with an inline cylinder arrangement, naturally aspirated intake form, and hybrid injection fuel supply method.

19

1

Share

Is it necessary to display the annual vehicle inspection sticker?

It is necessary to display the annual vehicle inspection sticker. According to relevant regulations, vehicles on the road should affix the current year's inspection sticker in a visible position on the upper right corner of the front windshield. It is important to note that private cars exempt from inspection for 6 years need to collect the annual inspection sticker every 2 years, which can be obtained at the vehicle management office or traffic police station. Before the annual inspection, it is necessary to handle any traffic violations, and then bring the vehicle registration certificate, a copy of the compulsory traffic insurance policy, and the owner's ID card for the inspection. When handling compulsory traffic insurance for the vehicle, you can directly use the copy of the insurance policy to complete the exemption inspection procedures. The compulsory insurance also includes the record of the vehicle and vessel tax. Be careful not to leave the original document with the vehicle management office, as the original will be needed for future insurance claims.

7

3

Share

What car is the excellegt?

excellegt is the Buick Excelle, a Sino-American joint venture sedan positioned as an entry-level compact three-box sedan. Taking the 2019 Buick Excelle as an example, this model complies with the China VI emission standard, with body dimensions of 4609mm in length, 1798mm in width, and 1486mm in height, and a wheelbase of 2640mm. For suspension, it features a front MacPherson strut independent suspension and a rear multi-link independent suspension. In terms of the powertrain, the car is equipped with two turbocharged engines: a 1.0T and a 1.3T. The 1.0T engine delivers a maximum power of 92kW and a maximum torque of 170Nm, while the 1.3T engine offers a maximum power of 120kW and a maximum torque of 230Nm.

5

4

Share

What is the battery model for the Peugeot 308?

Where Should a Dash Cam Be Installed?

Why does the car move backward when in drive gear?

How to Deal with Whitening of Exterior Plastic on Cars?

How to Remove the Gear Panel of a Camry?

Is it necessary to display the annual vehicle inspection sticker?

What car is the excellegt?

What transmission does the Skoda Superb use?

Where is the cabin air filter located in the Volvo S80?

What are the body dimensions of the 2020 Haval H9?

What is MG?