What is the battery model for the Nissan X-Trail car key?

1 Answers
DiCarter
07/24/25 2:50pm
The battery model for the Nissan X-Trail car key is CR2032. CR2032 is a lithium manganese dioxide battery, named according to the IEC standard. The breakdown is as follows: C - Indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode. R - Indicates the battery shape is cylindrical; if it were square, F would be used instead. 20 - Indicates the battery diameter is 20mm. 32 - Represents the battery height of 3.2mm. The nominal voltage is 3.0V, with an endpoint voltage of 2.0V. The rated capacity varies between 200-240mAh, depending on the manufacturer's quality. The typical shelf life of a CR2032 battery is 5 years. If the manufacturing or quality control is poor, its lifespan can be significantly reduced. Domestic top-tier brands generally ensure this lifespan. Under ideal conditions (sealed, room temperature, no moisture, etc.), the lifespan can extend to 8 years or even 10 years. For Nissan X-Trail models such as the Fashion Edition, Comfort Edition, and Luxury Edition, the key battery model is CR2032. Replacing the key battery involves just three steps: Step 1: Remove the mechanical key. Press the lock button on the side of the smart key to release the mechanical key. Step 2: Open the battery cover. After removing the mechanical key, you will see a deep slot and a shallow slot at the top of the smart key. The deep slot is for the keyhole, while the shallow slot is used to open the battery cover. Insert the mechanical key into the shallow slot and pry it open gently to reveal the coin battery. Lightly press to remove the battery. Step 3: Replace the battery. Insert the new battery, reattach the battery cover, and reinsert the mechanical key to complete the replacement. Two important notes when replacing the Nissan X-Trail car key battery: The key uses a CR2032 coin battery—ensure you purchase the correct model. Replace the battery quickly, as the key has a memory function. If power is lost for more than 5 minutes, the key will need to be reprogrammed.
Was this review help?
15
5
Share
More Forum Discussions

What procedures are required for motorcycle registration?

First, take the certificate of conformity to the traffic police team for stamping, then bring the invoice, ID card, and other attachments purchased with the motorcycle to the State Taxation Bureau to pay the vehicle purchase tax. Mainland residents should provide the mainland "Resident Identity Card" (including residence or temporary residence certificate) or "Household Register" or military (including armed police) identity proof.
19
2
Share

How to Connect Bluetooth in Wuling Hongguang Mini?

First, start the vehicle, then locate the "Mode" button on the center console panel. Enable the Bluetooth function on your phone and turn on the option to make it visible to nearby devices. Then, press the "Mode" button in the car to select the "BLUE" mode. After that, find the Bluetooth signal of the car on your phone and connect to it to enable Bluetooth functions such as listening to music or other features.
20
3
Share

How to Replace Car Seat Foam?

First, locate the four screws (hexagonal) under the seat, then use a hexagonal screw tool to loosen them, after which you can remove the seat. If the seat is electrically adjustable, there will also be wires connected at the bottom. Simply disconnect the wire connectors, and the job is done.
15
1
Share

How to Replace the Rubber Blade of a Beam Wiper?

After locating the sliding part of the rubber blade, you can remove the clip that secures this end. If it's particularly tight, you can use needle-nose pliers to assist in disassembly. Use a clip or similar tool to pry up the metal buckle, and then you can remove the rubber blade. The metal buckle that secures the rubber blade must be fastened tightly; otherwise, the rubber blade may shift during use, affecting its performance.
11
2
Share

How to Engage the Forward Gear?

Press the clutch with your left foot while simultaneously pressing the brake with your right foot. Once the car stops reversing and comes to a complete halt, use your right hand to shift the gear lever from reverse to neutral, then quickly push the lever into first gear. Gently release the clutch with your left foot while slowly pressing the accelerator with your right foot, and the car will smoothly move forward.
9
0
Share

What is the penalty for parking on grid lines?

Parking on grid lines will result in a fine and a deduction of three points from the driver's license. According to the "Scoring Standards for Road Traffic Safety Violations," motor vehicle drivers who violate prohibitory signs or markings will be penalized with a deduction of three points for each offense.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.