What is the battery model for the Languid car key replacement?

1 Answers
ChaseLee
07/30/25 3:58am
Languid key battery model: CR2032. When replacing the battery, owners must ensure to purchase the same model. Steps to replace the key battery for Hyundai Languid are as follows: 1. Pull out the mechanical key. You will see a notch in the middle of the plastic shell. Use a flat-head screwdriver to pry it open. There are no screws; simply pry it open. 2. Remove the mechanical key. Use a dime coin to twist along the small groove on the key's surface to open it. Replace with a CR2032 Panasonic lithium battery, ensuring the positive side faces down. After replacement, firmly press the separated key parts together to snap the clasp shut.
Was this review help?
15
1
Share
More Forum Discussions

When did the penalty points system for running red lights start?

According to the new traffic regulations, the penalty of deducting 6 points for running a red light has been implemented since January 1, 2013. The relevant provisions are as follows: 1. On October 8, 2012, the Ministry of Public Security announced the newly revised "Regulations on the Application and Use of Motor Vehicle Driving Licenses." The new traffic rules have strengthened the management of drivers. The latest traffic regulations' penalty points system has also become more stringent, with the penalty for running a red light increasing from 3 points to 6 points, and failing to display or obscuring a license plate will result in an immediate deduction of 12 points. 2. The new traffic regulations came into effect on January 1, 2013 (New Year's Day), increasing the number of penalty items from 38 to 52. Running a red light now deducts 6 points, and driving a motor vehicle at a speed exceeding 50% of the prescribed limit will result in a deduction of 12 points.
12
0
Share

Why Can't the Car Door Be Locked?

Here are the reasons why the car door cannot be locked: 1. If you are using the remote key to lock the door, it is very likely that the remote lock is malfunctioning or factors such as the aging of the car's remote transmitter antenna are causing the remote key to not work. In this case, you can use the spare mechanical key to lock the door. 2. There is strong magnetic field signal interference around the car. Since the smart key uses low-intensity radio waves, it cannot function properly under magnetic interference. 3. If you frequently encounter situations where the remote lock does not work in a certain place, then the owner needs to be wary of door signal jammers, as some criminals use a radio signal jammer that can emit electromagnetic waves of the same frequency as the car lock signal, thereby blocking the electronic code of the car's central lock and temporarily disabling it.
9
4
Share

What are the differences between Golf and Golf GTI?

The differences between Golf and Golf GTI are as follows: 1. Engine: The Golf GTI is equipped with a 2.0L turbocharged/in-line four-cylinder 16-valve electronically controlled dual-injection system engine, which provides stronger power and accelerates from 0 to 100 km/h in 6.9 seconds. The Golf uses a 1.6L in-line four-cylinder 16-valve electronically controlled fuel injection engine. 2. Transmission: The Golf GTI features a 7-speed DSG dual-clutch transmission for faster gear shifting, while the Golf has a 6-speed automatic transmission. 3. Suspension system: The Golf GTI comes with a reinforced MacPherson independent front suspension/reinforced four-link independent rear suspension, offering more stable handling and a top speed of 240 km/h. The Golf has a MacPherson independent front suspension/compound torsion beam semi-independent rear suspension, with a top speed of 185 km/h.
1
4
Share

Where is the fuse box located in the Roewe RX3?

The Roewe RX3 is equipped with two fuse boxes: the front passenger side fuse box (located behind the glove box on the front passenger side) and the engine compartment fuse box (located on the left front side of the engine compartment). Generally, the back of the fuse box is printed with the function and specifications of each fuse. Owners only need to refer to the corresponding fuse specifications or consult the user manual to check the fuses. Below are the steps to replace a fuse: 1. Turn off the ignition switch and all electrical devices, and disconnect the negative battery cable. 2. Remove the sealing panel under the glove box to access the front passenger side fuse box; for the engine compartment fuse box, simply press the latch to open the fuse box cover. 3. Use a fuse puller to grip the head of the fuse, pull and remove the fuse, and check if the fuse is blown. 4. If the fuse is blown, replace it with another fuse of the same ampere rating.
17
1
Share

What are the differences between Vios and Yaris L?

The differences between Vios and Yaris L are as follows: 1. Different exterior dimensions: Yaris L measures 4440mm in length, 1710mm in width, and 1490mm in height; Vios measures 4420mm in length, 1700mm in width, and 1490mm in height. 2. Different engines: Yaris L is equipped with a 73kW 1.3L naturally aspirated engine; Vios is equipped with a 81kW 1.5L naturally aspirated engine. 3. Different tire specifications: Yaris L uses 175/65R14 tires; Vios uses 185/60R15 tires.
13
2
Share

What to Do If It Rains During the Driving Test?

Here are the precautions for taking the driving test on a rainy day: 1. Prepare tissues and handkerchiefs for the test. If it rains during the test, prepare tissues or handkerchiefs in advance. Before getting into the car, carefully wipe both side mirrors to prevent water droplets from obstructing your view. 2. Learn to use the windshield wipers correctly. On rainy days, turn on the windshield wipers promptly after getting into the car and adjust the wiper speed according to the intensity of the rain. The windshield wipers are located below the right side of the steering wheel in the training car. 3. Learn to open the car window during the test. On rainy days, do not close the windows completely; leave a small gap. Otherwise, the car interior may fog up, obstructing your view and affecting judgment accuracy. 4. Learn to control the speed flexibly. The second part of the test is conducted on a closed course, and the car is driven in first gear. Students should control the speed as practiced before, so speed control is not a major issue. 5. Learn to judge a safe following distance. For the third part of the test, it is essential to maintain a safe distance from other vehicles. Rain makes the road slippery, and tires are prone to skidding. When braking, avoid slamming on the brakes; instead, use light or intermittent braking to reduce speed gradually. This ensures both speed control and gives the following vehicle enough time to brake. 6. Keep the soles of your shoes dry. Try to keep the soles of your shoes dry. Shake off any water from the soles before getting into the car. After entering the car, rub the soles against the floor mat or the floorboard a few times before placing them on the clutch or brake pedal. Alternatively, use tissues to wipe the soles to keep them dry, preventing slips that could lead to accidents like stalling the car.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.