What is the battery model for the Haval H7 car key?

2 Answers
DelJackson
09/06/25 2:09am
The battery model is CR2032. It is a lithium manganese dioxide battery, named according to the IEC standard. Among them: C- indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R- indicates that the shape of the battery is cylindrical, and if it is square, F is used instead; 20 indicates that the diameter of the battery is 20mm; 32 represents the height of the battery is 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity is about 200mAh. CR2032 usually has a lifespan of 5 years. If the manufacturer's production level is not high or quality control is poor, its lifespan will be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. If the usage environment is ideal (sealed, room temperature, free from moisture, etc.), its lifespan can be further extended to 8 years or even 10 years. The usage time of the car remote key battery is closely related to the frequency of use. The more frequently it is used, the shorter the usage time will be. If the remote key battery runs out of power, you can directly use the mechanical key to open the vehicle and start the engine. The batteries used in car remote keys are button batteries, mainly including models: CR2016, CR2025, CR2032, and CR2450. For the specific model used in each key, the owner can refer to the battery model in the user manual for replacement. Button-type CR2016 battery: The usage rate of car key remotes is very high, and it is almost one of the most common car remote batteries. The voltage of this battery is 3V, and generally, car key batteries are powered by 9V, so every time the battery is replaced, three batteries need to be replaced. Examples include Guangben, Toyota, Volkswagen, Mazda, etc. CR2016 specifications: battery diameter is 20mm, thickness is 1.6mm. Button-type CR2025 battery: Its usage rate is much lower than that of CR2016. However, some car keys still use it. It is relatively thicker than the 2016 model but has a higher storage capacity. CR2025 specifications: battery diameter is 20mm, thickness is 2.5mm. This type of battery is also commonly used in audio remotes. Button battery CR2032: Its thickness is twice that of CR2016. The 3V-CR2032 lithium manganese battery belongs to the lithium-manganese dioxide structure. The positive electrode material is chemically very stable manganese dioxide, the negative electrode material is metallic lithium, and the electrolyte is a lithium battery. The main components of the electrolyte are ethylene glycol dimethyl ether, propylene carbonate, and lithium perchlorate. Its shape resembles a button, hence it is called a button lithium battery or lithium manganese button battery. Button battery CR2450: Compared to the other three models, it is thicker and larger, with a diameter of 24.5mm and a height of 5.0mm. The rated current value of CR2450 is 0.2mA, mainly used in low-power electronic products. Generally, the battery can provide an output current of 0.001mA to 5mA, with a continuous output current of up to 15mA and a flash output current of up to 30mA, meeting the requirements of most small electronic products for light emission, sound production, and RF output.
Was this review help?
1
4
Share
GenesisFitz
09/18/25 2:14am
I remember the battery model for the Haval H7 car key is CR2032, which is a quite common button cell battery and is widely used across many car brands. This model is chosen because its size fits perfectly inside the key casing, and the 3-volt voltage is sufficient to power the remote signal. If you replace it yourself, it's easy to find a matching one—supermarkets or online hardware stores sell them, and they're cheap; I spent just a few yuan last time I replaced mine. Be careful not to mistakenly buy CR2025 or CR2016, as their thickness is different, which might cause poor contact and key malfunction. Regular replacement is important; I change mine every two years to avoid being locked out due to a dead battery, especially in winter when the battery life tends to be shorter due to the cold.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

Is It Harmful to Park with Wheels Not Straight?

Parking with wheels not straight does have negative effects on the car, with the main hazards as follows: 1. Parking with wheels not straight can damage the steering system. The tie rods cannot return to their neutral position and remain under stress, which can accelerate aging over time. 2. It harms the suspension system. The suspension system will tilt towards the direction the wheels are turned, causing the soft-supporting rubber cushions and bushings to remain under stress and wear out faster. 3. It accelerates tire wear. Wheels not being straight cause excessive deformation of the tire sidewalls, leading to faster wear on the sidewalls. Tire Maintenance Tips: 1. Check your tires at least once a month. Inspect the tire pressure when the tires are cold, including the spare tire. 2. If you notice that the tire pressure decreases too quickly, promptly identify the cause rather than simply inflating the tire at a shop. 3. Replace tires when they wear down to the wear indicator. Driving with tires worn beyond the indicator is dangerous, especially on wet roads, as the drainage performance is significantly reduced, severely affecting wet traction. 4. Regularly check wheel alignment and balance. If you feel excessive vibration while driving, it may indicate poor wheel alignment or imbalance. These issues not only shorten tire life but also affect vehicle handling and safety. 5. When replacing tires, ensure that the tires on the same axle have the same specifications, structure, brand, and tread pattern. If replacing a single tire, make sure the tread groove depth is similar to the other tire on the same axle to avoid causing the vehicle to pull to one side.
17
5
Share

Is Car Window Tinting Illegal?

Car window tinting is not illegal, but there are requirements for the front windshield. The light transmittance of the front windshield must be above 70%. Tinting can block ultraviolet rays, reduce heat, and prevent injuries caused by sudden glass breakage. Additionally, the one-way visibility feature of solar films helps protect personal privacy. According to the newly revised national standard "Safety Technical Specifications for Motor Vehicle Operation," there are three scenarios where window tinting is considered non-compliant: 1. Applying mirror-like reflective tinting films. 2. Failing to meet the required visible light transmittance ratio. 3. Applying colored or heat-insulating paper: The new standard prohibits the use of opaque or any mirror-like reflective colored or heat-insulating paper on all windows of highway buses, tourist buses, and school buses.
15
3
Share

What are the symptoms of a faulty turbo blow-off valve?

The most obvious manifestation of a damaged turbo blow-off valve is insufficient power, which can cause poor engine performance. Jerking sensations may occur during acceleration or deceleration, with white or blue smoke coming from the exhaust pipe, increased fuel consumption, and unstable turbo pressure. The functions of the turbo blow-off valve are as follows: 1. The main function of the blow-off valve is to protect the turbo by utilizing the pressure difference of air to open the blow-off valve (inside the turbo body) when the exhaust gas pressure is too high, allowing the exhaust gas to be discharged through the blow-off valve instead of passing through the turbo. 2. The blow-off valve, also known as a safety valve, can automatically open and close based on the system's working pressure. It is generally installed at the closed ends of equipment or pipelines to protect the safety of the road protection system. 3. When the pressure in the equipment or pipeline exceeds the set value of the blow-off valve, it will automatically open.
8
3
Share

How Many Kilometers Should You Change Transmission Oil?

Here are the recommended mileage intervals for changing transmission oil: 1. Manual transmissions using mineral oil should have the oil changed every 2-3 years or 40,000-60,000 kilometers, the same applies to dry dual-clutch transmissions. 2. Synthetic oil should be changed every 150,000-200,000 kilometers. 3. Most automatic transmissions require a transmission oil change every 60,000-80,000 kilometers. Additional information: If the vehicle shifts smoothly and there is no significant change in transmission noise, replacement may not be necessary; however, if the vehicle experiences jerky shifts, especially when driving speeds exceed 100 kilometers per hour with noticeably increased noise, it may be time to consider changing the transmission oil.
20
2
Share

What tires are equipped on the Audi Q3?

The Audi Q3 is equipped with two types of tires: one is 235/55/R18, and the other is 235/50/R19. Among them, the 235/55/R18 tires are only used in models with the 1.4T engine, while all other models use the 235/50/R19 tires. The letter R indicates that the tires are of radial construction. More details about the Audi Q3 are as follows: 1. The body dimensions of the Audi Q3 are 4481mm in length, 1848mm in width, and 1616mm in height, with a wheelbase of 2680mm and a fuel tank capacity of 60 liters. 2. The Audi Q3 is powered by a 1.4L turbocharged engine paired with a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum power speed of 5000 to 6000 rpm. Its drivetrain is front-wheel drive. 3. The front suspension uses a MacPherson strut independent suspension, while the rear suspension uses a torsion beam non-independent suspension.
6
2
Share

How to Replace the Battery in a Cadillac Car Key?

Instructions for replacing the battery in a Cadillac car key: 1. Remove the mechanical key. Press the switch and then pull the mechanical key upward to remove it. 2. Pry open the key along the edge. Note: You can use your fingernail or a flat-head screwdriver, but you must apply gentle force. Avoid using excessive force, as there are six small clips inside that can easily be damaged. 3. Once opened, you will see the key split into two halves: one side contains the integrated circuit board, and the other side holds the battery. 4. Remove the old battery and install the new one. 5. Reassemble the key.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.