What is the battery model for the GL8?

1 Answers
MacGarrett
07/29/25 3:40pm
The battery model for the Buick GL8 is 80D26R 12V 70A. The battery is a crucial component in a vehicle, supplying power to all electronic devices when the engine is not running. After the engine is started, the alternator takes over the power supply for the electronic devices and also charges the battery. The battery is responsible for starting the engine. During engine startup, the ignition system, fuel supply system, and starter all require electricity to function. The battery is a wearable part that needs regular replacement. Typically, a battery lasts 3 to 4 years, but many car batteries fail before reaching this lifespan due to improper usage habits. When the engine is not running, avoid sitting in the car and using electronic devices for extended periods, as this can shorten the battery's lifespan. During routine maintenance, ask a technician to test the battery's internal resistance and voltage with professional equipment. If these values fall below standard levels, it indicates that the battery needs replacement. If the car will be unused for an extended period, disconnecting the battery's negative terminal can prevent it from discharging. Prolonged discharge can significantly reduce the battery's service life.
Was this review help?
16
0
Share
More Forum Discussions

What is the difference between an automatic and manual transmission driver's license?

The differences between an automatic and manual transmission driver's license are as follows: 1. Different permitted vehicle types: An automatic transmission license permits driving small and micro automatic passenger vehicles, as well as light and micro automatic cargo vehicles; a manual transmission license permits driving small and micro passenger vehicles, light and micro cargo vehicles, and also light and micro specialized operation vehicles. 2. Different permissions for other vehicle types: Holding a manual transmission license allows driving automatic transmission vehicles, but holding an automatic transmission license does not permit driving manual transmission vehicles. 3. Different codes: The permitted vehicle type code for a manual transmission license is "C1," while the code for an automatic transmission license is "C2."
1
3
Share

What are the differences between D trains and G trains?

Here are the differences between D trains and G trains: 1. Speed: D trains are electric multiple unit (EMU) trains with speeds around 200 km/h, while G trains are high-speed rail trains operating at approximately 300 km/h. 2. Ticket price: D trains (EMU trains) have relatively lower fares compared to G trains (high-speed rail). 3. Track usage: EMU trains can operate on existing railway lines (their signal systems are compatible with conventional tracks), whereas high-speed rail trains must run on newly-built passenger-dedicated lines (their signal systems are incompatible with conventional tracks).
20
3
Share

What does acceleration g-value mean?

Acceleration g-value is the unit of gravitational acceleration, with a value of approximately 10 meters per second squared. Here is some relevant information about vehicle speed: 1. Vehicle travel speed: Vehicle travel speed refers to the distance a vehicle travels per unit of time, simply referred to as speed, commonly measured in kilometers per hour or meters per second. 2. Vehicle operating speed: Vehicle operating speed is the average speed during the total duty time of a vehicle (including driving time and stopping time). It is an important indicator for measuring vehicle usage efficiency and transportation efficiency. Its level depends on the vehicle's average technical speed (average speed during driving time) and the amount of stopping time.
4
1
Share

What does BSM malfunction mean?

BSM malfunction refers to a Blind Spot Monitoring system failure. Here are the relevant details: 1. Radar: The radar inside the rear bumper may malfunction due to mud or dust accumulation. Owners can clean the rear bumper and restart the vehicle to check if the warning persists. 2. BSM: This stands for Blind Spot Monitoring system, which alerts drivers when vehicles approach from adjacent lanes behind, assisting drivers in checking rear-side areas during lane changes. The Blind Spot Monitoring system provides reassurance in heavy traffic conditions by using rear-facing digital infrared cameras mounted on door mirrors to monitor vehicle flow on both sides. When a vehicle enters the blind spot of the rearview mirror, the system alerts the driver via a warning light on the inner A-pillar.
10
2
Share

What are the effects of changing to wider wheels on a car?

The effects of changing to wider wheels on a car include: 1. Reduced ride comfort: Wider and thinner tires produce more road noise, which is particularly noticeable with some performance tires, affecting the quietness inside the car; 2. Impact on acceleration and braking performance: Larger wheels naturally weigh more, leading to increased unsprung weight. This makes the vehicle's suspension less responsive to road bumps and increases the rotational inertia of the wheels. The classifications of car wheels include: 1. Steel wheels: Simple manufacturing process, relatively low cost, and strong resistance to metal fatigue; 2. Alloy wheels: Lighter weight, lower inertial resistance, high manufacturing precision, and minimal deformation at high speeds, which helps improve the car's straight-line driving performance and reduces tire rolling resistance.
9
5
Share

What is the maximum speed limit for motor vehicles when passing through sharp curves?

Motor vehicles should not exceed 30KM/h when passing through sharp curves. The following are precautions for driving motor vehicles: 1. Maintain a safe speed: While driving on the road, do not exceed the speed indicated by speed limit signs or markings. Always maintain a safe speed and avoid speeding. 2. Keep a safe distance: Drivers should always maintain a safe longitudinal and lateral distance from other vehicles, drive cautiously, and prevent traffic accidents. 3. Approach intersections with caution: Intersections are areas with complex traffic conditions. Drivers should slow down when approaching an intersection, observe the traffic situation ahead, and proceed with caution only after confirming safety.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.