···
Log in / Register

What is the battery model for the Emgrand GS car key?

4 Answers
SanHaven
07/29/25 11:55pm

The battery model for the Emgrand GS car key is a 3V CR2025. The method to replace the battery is: locate the "open" mark on the key, next to which there is a small notch. Insert a flat-head screwdriver into the notch and rotate the key cover counterclockwise to open it, then take out the button battery for replacement. The Emgrand GS is a model under the Geely Group, classified as a crossover SUV. The vehicle's dimensions are 4440mm in length, 1833mm in width, and 1560mm in height, with a wheelbase of 2700mm. In terms of appearance, the Emgrand GS largely follows the design concept of the Emgrand Cross concept car, featuring the Geely family-style ripple grille at the front and equipped with LED daytime running lights.

Was this review help?
18
1
Share
DeAthena
08/16/25 3:32am

As an owner of the Emgrand GS, I remember the key battery model is CR2032. I changed it once myself—just pry open the back cover with a small coin, and remember to place the battery with the shiny side facing up. It’s very cheap to buy at the supermarket, just five yuan for one that lasts over two years. After the last replacement, the remote range noticeably improved, and even the lock response became much quicker. A reminder to fellow car owners: don’t go to the 4S shop for a replacement—they charge fifty yuan, which is practically a rip-off. Keeping a spare battery in the glove box is very convenient to avoid the awkwardness of suddenly running out of power.

Was this review help?
14
1
Share
Expand All
VanHaven
10/19/25 4:54am

When repairing cars, it's common to encounter car key battery depletion. For the Emgrand GS, 90% of cases use CR2032 coin cell batteries. This model is widely available in electronics markets, costing just two yuan each when bought wholesale. When replacing it yourself, pay special attention to the key structure—first remove the mechanical key, then use a flathead screwdriver to pry open the silver cover plate. The biggest fear is breaking the clips by forcing them; beginners are advised to watch tutorial videos online. Install the battery with the printed positive side facing outward, and remember to test the lock button's sensitivity before closing the cover.

Was this review help?
3
0
Share
Expand All
LeonardoAnn
12/02/25 5:29am

With a decade of experience in auto parts, I've seen thousands of car keys. The battery model for Emgrand GS is indeed CR2032. These 20mm lithium batteries are widely available, even in supermarket watch sections. However, note there might be minor variations across model years: some 2020 owners report slightly shallower battery compartments, so it's wise to photograph the old battery before replacement. All versions use 3V voltage - brands like Nanfu or Panasonic work fine. Don't lose the waterproof rubber gasket, or the key may short-circuit in rainy conditions.

Was this review help?
9
5
Share
Expand All
More Forum Discussions

Which region does the license plate prefix 'Yu' represent?

Yu is the license plate prefix for Henan Province. The license plate prefixes for various cities in Henan Province are as follows: Yu A for Zhengzhou, Yu B for Kaifeng, Yu C for Luoyang, Yu D for Pingdingshan, Yu E for Anyang, Yu F for Hebi, Yu G for Xinxiang, Yu H for Jiaozuo, Yu J for Puyang, Yu K for Xuchang, Yu L for Luohe, Yu M for Sanmenxia, Yu N for Shangqiu, Yu P for Zhoukou, Yu Q for Zhumadian, Yu R for Nanyang, Yu S for Xinyang, and Yu U for Jiyuan City. The functions of license plates include: 1. Numbering and information registration for vehicles; 2. Identifying the region to which a vehicle belongs; 3. Tracing the owner and registration details of a vehicle based on its license plate.
10
5
Share

What is the method for removing the spark plugs of the Chery Tiggo 8?

Chery Tiggo 8 spark plug removal method is: 1. Open the engine hood of the Chery Tiggo 8 when the engine is cold, and locate the position of the spark plugs; 2. Remove the engine decorative panel and the fixing screws on the ignition coils; 3. Disconnect the connectors on the ignition coils and pull out all the ignition coils; 4. Use a special spark plug removal tool to remove all the spark plugs from the cylinder head; 5. Install the new spark plugs into the cylinder head and tighten them to the specified torque. Taking the 2020 Chery Tiggo 8 as an example, it is a mid-size SUV with body dimensions of: length 4700mm, width 1860mm, height 1746mm, wheelbase of 2710mm, and a curb weight of 1509kg.
15
4
Share

What gear should be in when waiting at a red light?

When waiting at a red light, you should shift to N or neutral. The steps for waiting at a red light are: 1. When you see the red light from a distance, gently press the brake to slow down; 2. When you reach the intersection with the red light, press the clutch all the way down; 3. While pressing the clutch all the way down, press the brake all the way down; 4. After the car stops, shift the gear to neutral and pull up the handbrake; 5. Release the clutch and brake, then wait for the red light. The steps for starting the car are: 1. Get in the car and sit properly; 2. Start the car; 3. Press the clutch and brake; 4. Release the handbrake and shift to first gear; 5. Slowly release the clutch; 6. Gently press the accelerator; 7. Fully release the clutch, and the car will start moving.
17
2
Share

How to Check the Remaining Fuel Level in an Audi A4L?

Audi A4L checks the remaining fuel level through the fuel gauge on the central instrument panel. Taking the 2020 Audi A4L as an example, it belongs to the mid-size car category with body dimensions of: length 4858mm, width 1847mm, height 1439mm, and a wheelbase of 2908mm. The fuel tank capacity is 56 liters. The 2020 Audi A4L features a five-link independent suspension at the front and a five-link independent suspension at the rear. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 270Nm. It is paired with a 7-speed dual-clutch transmission.
20
1
Share

Where is the dg15t engine produced?

dg15t engine is produced in China. The engine is a device that provides power for automobiles, determining the vehicle's power, fuel economy, stability, and environmental performance. The function of the engine: It converts the thermal energy of gasoline into mechanical energy by burning the gas in a sealed cylinder to expand the gas, pushing the piston to do work. The engine consists of: 1. Valve train; 2. Crankshaft and connecting rod mechanism; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system. The maintenance methods for the engine are: 1. Use qualified engine oil; 2. Use qualified coolant and antifreeze; 3. Regularly clean the scale in the radiator; 4. Regularly clean the carbon deposits in the engine; 5. Regularly replace the three filters of the car; 6. Maintain a reasonable speed.
13
3
Share

Where is the glove box?

The glove box is located in front of the passenger seat. It consists of a glove box light, door hinge, door lock mechanism, and damper. The glove box light provides illumination when the owner opens the glove box, lighting up the interior of the storage compartment. The glove box door lock comes in hook-type and pin-type configurations. The method for removing and installing the glove box is as follows: Open the car's glove box, remove the piston buffer clip on the right side, rotate the fixing button on the inner right side counterclockwise, and there are knobs on both the left and right sides inside that need to be removed. The glove box can then be opened to its maximum extent. Use a clip pry tool to remove the fixing pins on the left and right sides of the glove box. After removing the pins, the glove box can be taken off.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.