What is the battery model for the Cadillac XT5 key?

1 Answers
Evie
07/29/25 8:57pm
The remote key battery model for the Cadillac XT5 is CR2032. To replace the battery, remove the mechanical key from the Cadillac, use a flat-head screwdriver to pry open the key shell along the edge, open the shell, and take out the old battery. The Cadillac XT5 key features five buttons: lock, remote start, trunk open, find car, and unlock. You can close the vehicle's door windows by pressing the lock button on the remote key and open them by pressing the unlock button. It also allows remote starting of the vehicle. Improper battery replacement or using non-compliant batteries may damage the car key. Therefore, when purchasing a new battery, pay attention to its voltage and specifications. If you encounter unsolvable issues during the replacement process, it is recommended to seek help from a car dealership. Generally, the battery life of a car remote key is 2-3 years, depending on usage frequency, and may vary by model. When the control distance of the car key is less than half of the maximum remote distance, or less than about six meters, it's time to replace the battery promptly.
Was this review help?
4
2
Share
More Forum Discussions

Does ETC require the vehicle owner's personal ID?

Yes, the vehicle owner's personal ID is required to apply for ETC. According to the "Implementation Plan for Accelerating the Application of Electronic Non-stop Toll Collection Services on Expressways" issued by the Ministry of Transport, the original valid ID card of the vehicle owner, the original and a copy of the vehicle registration certificate (with the most recent annual inspection stamp) are required. If applying on behalf of someone else, the original valid ID card of the agent is also required. If applying for ETC through major bank branches, a corresponding bank debit or credit card must also be prepared. Some banks only support ETC binding with credit cards, while others may require freezing a certain amount as a deposit when binding ETC with a debit card. Documents required for official vehicles: An introduction letter from the vehicle owner (with official seal); a copy of the organization code certificate or business license (with official seal); the original ID card of the agent; the original vehicle registration certificate; the vehicle for which ETC is to be applied. ETC billing principle: There will be one or more ETC lanes on expressways. Through dedicated short-range microwave communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, and using computer networking technology for backend settlement with the bank, the vehicle can pay tolls without stopping at the toll station. All this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: eliminates the hassle of waiting in line; Green and eco-friendly: green and low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: saves costs, reduces the frequency of vehicle starts and brakes, lowering wear and fuel consumption; Improved efficiency: ETC lanes can theoretically increase vehicle passing efficiency by 2-3 times, making traditional ETC faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key urban clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased," and set a target in the main indicators of the "13th Five-Year Plan" for comprehensive transportation development: "by 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate for passenger vehicles, efforts will be made to promote ETC usage for trucks in the future, exploring deep integration between the ETC system and smart transportation development directions such as vehicle-to-vehicle communication and vehicle-road coordination, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC usage. ETC usage precautions: The ETC transaction sensing range is 8 meters. When encountering a vehicle in front that has stopped, to prevent the vehicle in front from having a faulty ETC device or no ETC device at all, maintain a distance of more than 10 meters to avoid automatic sensing and paying for the vehicle in front. The recognition speed for ETC lane passage is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, leading to billing failure. Unauthorized disassembly or movement of the OBU device, detachment or loosening of the ETC electronic tag, etc., will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the expressway service office for testing. For non-human-caused loosening or detachment, reactivation is sufficient. When using a debit card bound to ETC, insufficient balance will also cause billing failure. Follow the guidance of on-site staff to use the manual MTC lane, paying with cash or card. Excessive windshield thickness may cause poor sensing. This is especially important for vehicles that have had their windshields replaced after accidents or for those who have modified their front windshields.
2
5
Share

What are the body dimensions of the Elysion?

The length, width, and height dimensions of the Elysion are 4951mm/1842mm/1711mm, which are official data. The length of the Elysion refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding points at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding points on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The naturally aspirated engine of the Elysion has a maximum power of 107kw and a maximum torque of 175 Nm. This engine reaches its maximum power at 6200 rpm and its maximum torque at 3500 rpm. It is equipped with multi-point electronic fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with an electronic continuously variable transmission (E-CVT). There are national regulations regarding vehicle dimensions. According to the national standard 'GB1589-89', the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to comply with the usage requirements of public roads.
20
4
Share

What Are the S and L Gears?

Here is the relevant introduction about the S and L gears: 1. L Gear: Never engage this gear during normal driving. When accelerating or decelerating during driving, the vehicle's gear remains in the low gear. Maintaining a low gear while accelerating uphill provides stronger power. When going downhill, the low gear can help slow down the vehicle. 2. S Gear: When the S gear is engaged, the engine speed increases, and the fuel injection volume changes. At the same time, the adjustable suspension comfort becomes stiffer, reducing body roll during turns and alleviating nose-diving when braking. The trade-off for these effects is increased fuel consumption due to higher engine speeds, but the vehicle's overall performance is enhanced.
4
2
Share

What is the battery model for Venucia T90?

Venucia T90 uses a 46B24L battery model with 12V output voltage, which is a lead-acid battery primarily composed of lead and its oxides, featuring sulfuric acid solution as electrolyte, manufactured by VARTA. Here are the main reasons for battery damage: 1. Not turning off vehicle electronics before engine shutdown, causing excessive instantaneous current during restart that damages the battery. 2. Leaving headlights on after parking, resulting in complete battery drain. 3. Modifying car circuits leading to excessive power load on the battery.
5
3
Share

How Many Cylinders Does the Focus Engine Have?

Focus is equipped with a 3-cylinder engine, with 4 valves per cylinder. The working principle of an automobile cylinder is to guide the piston to perform linear reciprocating motion within the cylinder. In the engine cylinder, air converts thermal energy into mechanical energy through expansion; in the compressor cylinder, gas is compressed by the piston to increase pressure, thereby providing a power source. Below is an introduction to the classification of cylinders: 1. Single-acting cylinder: Only one end has a piston rod. Air is supplied from one side of the piston to generate pressure, which pushes the piston to extend and produce thrust, and returns via spring or self-weight. 2. Double-acting cylinder: Air is alternately supplied from both sides of the piston, outputting force in one or two directions. 3. Diaphragm cylinder: Uses a diaphragm instead of a piston, outputting force in only one direction and resetting via spring. It has good sealing performance but a short stroke. 4. Impact cylinder: This is a new type of component. It converts the pressure energy of compressed gas into the kinetic energy of the piston's high-speed (10~20 meters/second) movement to perform work. The impact cylinder adds a middle cover with a nozzle and a drain port.
19
0
Share

Is it necessary to rotate front and rear tires?

Tire rotation between front and rear positions is necessary as wear patterns differ between them. Regular tire rotation is important. Below are specific details: 1. Generally speaking, for front-wheel-drive vehicles, since the front tires bear most of the forces during load-bearing, acceleration, steering, and braking, they wear out faster than rear tires, with a wear ratio that can reach 2:1. 2. In routine maintenance, frequent tire rotation helps ensure even wear, thereby extending tire lifespan. If signs of premature or irregular wear are observed, the rotation frequency may be appropriately increased. After rotation, a four-wheel alignment is required because it ensures the vehicle's suspension system and steering system are in standard condition.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.