What is the battery model for the Brilliance BMW 320LI?

1 Answers
DelCamille
07/29/25 10:24pm
The original battery for the Brilliance BMW 320LI uses the Varta brand. Below are some relevant details about the battery: 1. New Battery: If the new battery was produced within the last half-month and has not been used, it can be used directly without charging. If the new battery was produced a while ago or has been used, it is advisable to charge it before use. For dry-charged lead-acid batteries, as per the user manual, if stored for no more than two years, you only need to add the specified density of electrolyte and let it sit for 15 minutes before use—no charging is required. 2. Electricity Usage Habits: Develop good in-car electricity usage habits. Avoid listening to the radio loudly, charging your phone, or using an air pump when the engine is off. Regularly drive on highways for long distances. Driving on highways regularly has many benefits, not only helping to remove carbon deposits from the vehicle but also ensuring the battery is fully charged.
Was this review help?
2
5
Share
More Forum Discussions

What is the Heart of a Car?

The heart of a car is the engine. How a car engine works: It generates kinetic energy by burning fuel inside the cylinders, driving the pistons within the engine cylinders to move back and forth. This movement drives the connecting rods attached to the pistons and the crankshaft connected to the rods, performing reciprocating circular motions around the crankshaft center, thereby outputting power. Car engine maintenance tips: Use fuel that meets the specified standards. The quality of the fuel significantly impacts the combustion in the engine. Poor-quality gasoline can cause a large amount of carbon deposits and gum to form in the combustion chamber, fuel injectors, intake passages, and valves, leading to unstable idling and difficulty accelerating, among other issues. When starting the engine in a cold state, it is necessary to warm up the engine appropriately. At normal operating temperatures, the engine's components experience optimal operational resistance, wear, and stability.
7
1
Share

Can You Drive with a Brake Light Malfunction?

If the electronic parking brake system malfunctions, the vehicle should not continue to be driven. Below is a detailed introduction to the electronic parking brake system: 1. Compared to Lever Handbrakes: The electronic parking brake system replaces traditional mechanical levers and tire cables, substituting the conventional lever handbrake with an electronic handbrake button. It is safer than traditional lever handbrakes, as the braking effect is not influenced by the driver's force, turning the traditional lever handbrake into an easily accessible button. 2. Main Applications: The electronic parking brake system is primarily used in tractors and cargo trucks. The electronic parking brake energy-saving system is equivalent to the engine having a three-gear selection button, allowing free selection based on different road conditions and load capacities. This keeps the engine operating within the optimal fuel economy range, achieving fuel-saving effects.
18
1
Share

What is the correct way to use hazard warning lights?

The correct usage of hazard warning lights is as follows: 1. When driving in foggy conditions, due to reduced visibility, you should not only turn on the hazard warning lights but also activate the fog lights to alert other vehicles. 2. In case of vehicle breakdown or traffic accidents on the road, hazard warning lights should be turned on to warn passing vehicles for safety. On highways, failure to use lights and set up warning signs properly after a breakdown or accident will result in a 12-point penalty. 3. When towing a malfunctioning vehicle, both the towing vehicle and the towed vehicle should turn on the hazard warning lights to indicate their abnormal status. 4. When temporarily parked on the road, turn on the hazard warning lights to alert other vehicles. 5. When forming a convoy as permitted by traffic authorities, all vehicles in the convoy should activate their hazard warning lights.
18
4
Share

What are the common transmission faults of Honda CR-V?

Common transmission faults of Honda CR-V include: 1. Accumulation of dirt and impurities inside the valve body, forming blockages that prevent effective regulation of oil pressure; 2. Transmission overheating, which can degrade the quality and friction characteristics of automatic transmission fluid, leading to sludge buildup inside the transmission, causing jerking and impact. If the temperature exceeds 120 degrees, rubber sealing materials may begin to harden or hydraulic pressure may decrease. Below is more information about the 2021 Honda CR-V 240TURBO manual two-wheel-drive classic edition: 1. It is a compact 5-door, 5-seat SUV with dimensions of 4621mm in length, 1855mm in width, and 1679mm in height. 2. It has a wheelbase of 2661mm, equipped with a 6-speed manual transmission, and the engine delivers a maximum torque of 243 Nm and a maximum horsepower of 193 hp.
14
3
Share

Do You Need to Replace the Control Arm When the Control Arm Bushing is Worn Out?

Do You Need to Replace the Control Arm When the Control Arm Bushing is Worn Out. Lift the vehicle: Remove the control arm bushing, then remove both ends of the control arm. Select two corresponding size metal sleeves and install the purchased bushing. The larger ones are left and right specific, marked with (L or R). Remove the old control arm: Then proceed with disassembly to remove the screws. This is the removed bushing, which falls off with a gentle pull, indicating quality issues. It may cause drumming sounds, front and rear tire play, accelerate the wear of the small tie rod, and thus affect the stabilizer bar and shock absorber. Install the new control arm: Apply dish soap to the new control arm bushing for lubrication to facilitate installation. Other lubricants that do not corrode rubber can also be used, but engine oil should not be used.
3
5
Share

Is it necessary to install a grounding strip to remove static electricity from private cars?

It is necessary to install a grounding strip to remove static electricity from private cars. Static electricity buildup in winter can lead to hazards: Especially in winter or abnormally dry environments, static electricity cannot dissipate through the air. Installation ensures improved vehicle safety. For older vehicles with minor oil seepage, static electricity may generate sparks that pose certain life safety threats. While driving, unexpected static shocks may cause excessive fright, potentially leading to traffic accidents. Static electricity can harm human health: Accumulated static electricity in the human body can damage health, severely affecting metabolism, raising blood sugar levels, causing skin diseases, and leading to autonomic nervous system disorders, reduced immunity, and increased susceptibility to illnesses like colds. Particularly during refueling at gas stations, it may also trigger accidental incidents.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.