What is the battery model for the Beijing Hyundai ix35?

3 Answers
DiAnastasia
07/24/25 12:31pm
The original battery model for the Beijing Hyundai ix35 is CMF60L-BCI. This vehicle is equipped with a maintenance-free calcium-based battery from the brand Fengfan. The battery has a rated voltage of 12V, a 20-hour rate capacity of 60Ah, and a rated reserve capacity of 92 minutes. The typical lifespan is 2-3 years, and regular inspections are necessary to determine if replacement is needed. Important considerations for battery charging: 1. Rapid discharge: If the battery discharges quickly (e.g., turning on headlights or interior lights while the vehicle is not in use), it should be slow-charged (low current) for 10 hours. 2. High electrical load: If the battery discharges slowly due to high electrical load while the vehicle is in use, it should be charged at 20-30A for 2 hours. 3. Battery gassing: During charging, observe the battery. If violent gassing (boiling) occurs or the electrolyte temperature exceeds 49°C (120°F), stop charging or reduce the charging rate. 4. Disconnecting the charger: Follow these steps to disconnect the battery charger: turn off the charger's main switch; remove the negative terminal clamp; remove the positive terminal clamp. 5. Battery maintenance: Before servicing or recharging the battery, turn off all accessories and stop the engine.
Was this review help?
9
0
Share
AylaAnn
08/11/25 3:11am
I've been driving a Hyundai ix35 for two years. When I first bought it, the battery was a 60Ah AGM model, with a label showing something like L2360. I remember having difficulty starting the car on winter mornings last year, and after inspection, I found the battery had aged, but the model was correct. When replacing the battery, the mechanic emphasized the importance of matching the original factory specifications, otherwise the start-stop system might malfunction. Such batteries typically last 3-5 years. It's important to minimize short trips that drain the battery and regularly check the voltage with a multimeter. If the voltage drops below 12V, it's time for a replacement. The battery is located under the hood at the front right corner. Replacing it yourself is straightforward, but make sure to buy a reputable brand for safety.
Was this review help?
7
5
Share
Expand All
Teresa
09/25/25 5:17am
I often help friends with car maintenance. The standard battery model for the ix35 is a 60Ah AGM. This model is chosen because it matches the vehicle's electrical system and provides stable voltage output. During repairs, I've found that switching to a smaller capacity battery can cause delayed or failed cold starts. It's important to regularly check the electrode connections for rust and ensure they are tightly secured. The battery typically lasts about 4 years, but if you drive frequently in the city, it's best to have it checked once a year. The original factory model offers good compatibility, avoiding overload from aftermarket electrical accessories and reducing the risk of short circuits for better safety.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

What Does the Maintenance Reminder on a Car Mean?

The appearance of a maintenance reminder on a car indicates that the vehicle requires servicing. After the maintenance is completed, the maintenance reminder light should be reset to avoid incorrect judgments regarding the car's mileage and usage cycle. Steps to reset the maintenance reminder light: 1. Turn off the ignition switch; 2. Press and hold the trip meter reset button on the instrument cluster to reset; 3. Turn on the ignition switch; 4. The odometer display will begin a countdown. When the display shows 0000.0, release the button, and the maintenance indicator light on the instrument cluster will turn off.
3
3
Share

What Are the Causes of Squeaking Noises from a Car Chassis?

The causes of squeaking noises from a car chassis are: 1. Corrosion or aging of the stabilizer bar bushings; 2. Damaged brake pads; 3. Malfunction in the connecting parts between the suspension and shock absorbers; 4. Noise from the wheel bearings; 5. Deformation of the shock absorber springs; 6. Aging or wear of the shock absorber pressure bearings. The engine chassis primarily serves a load-bearing function, with the car engine and all its components and assemblies mounted on it. The car chassis consists of the transmission system, running system, steering system, and braking system, ensuring the normal operation of the vehicle. The thickness of its plastic sealing material can reach 1.5 to 2.5 millimeters, providing protection when the underside is scraped by road protrusions.
10
0
Share

What to Do When the Paint on a New Car Gets Scratched Off?

Solutions for scratched-off paint on a new car: 1. If the scratched area is not deformed and the area of paint loss is small, you can purchase a touch-up pen matching the car's color and apply it; 2. If a large area of paint is scratched off, with significant damage in size and length, and obvious deformation, it is necessary to go to a repair shop for sheet metal shaping and paint repair. Car paint is a protective film sprayed onto the car, which is a type of coating that makes the car body less susceptible to corrosion. Car paint maintenance methods: 1. Remove dust from the car body promptly to minimize static electricity's attraction of dust; 2. Rinse off rain stains with clean water after rain; 3. When wiping, follow the direction of water flow from top to bottom.
13
5
Share

What color is the license plate of the Odyssey Hybrid?

Odyssey Hybrid has a blue license plate, as it is a hybrid electric vehicle. The Odyssey is a hybrid electric MPV under GAC Honda, with body dimensions of 4847mm in length, 1820mm in width, and 1702mm in height, and a wheelbase of 2900mm. The Odyssey is equipped with a 2.0L naturally aspirated engine, with an L-type cylinder arrangement, a maximum power of 107 kilowatts, and is paired with an electronic continuously variable transmission. Its suspension system features a MacPherson strut front suspension and a torsion beam rear suspension, with front-wheel drive and electric power steering.
6
4
Share

How to Test a Camshaft Position Sensor?

Testing methods for a camshaft position sensor: 1. Use a multimeter to check the resistance between terminal 1 of the sensor and terminal 62 of the ECU, terminal 2 of the sensor and terminal 76 of the ECU, and terminal 3 of the sensor and terminal 67 of the ECU; 2. When the engine is running, use an oscilloscope to measure the signal waveform between the signal output terminal and the ground terminal of the magnetic camshaft position sensor; 3. Turn off the ignition switch, unplug the sensor wire connector, connect the positive and negative probes of the multimeter to terminals 1 and 3 respectively, and test when the ignition switch is turned on.
18
0
Share

How to Apply Car Window Tint Film?

Methods for applying car window tint film: 1. Clean the car window and cut the tint film to the appropriate size; 2. Spray an appropriate amount of water on the window and smoothly lay the tint film in place; 3. Use a squeegee to remove bubbles and excess water; 4. Inspect and wipe clean. Car window tint film refers to a film applied to the surface of car glass, which provides functions such as heat insulation, light blocking, explosion-proof, one-way visibility, and glare reduction. Acceptance criteria for car window tint film: 1. The film must be installed as a whole piece without piecing together; 2. There should be no bubbles or creases; 3. When sitting in the driver's seat, the view outside through the front windshield should not appear blurry or have color distortion; 4. The edges of the film must be fully adhered without any lifting.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.