What is the battery model for the Audi Q2L key?

2 Answers
OGraham
07/29/25 6:38am
The battery model is CR2032. It is a lithium-manganese dioxide battery, named according to the IEC standard. Among them: C- indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R- indicates that the shape of the battery is cylindrical, and if it is square, F is used instead; 20 indicates that the diameter of the battery is 20mm; 32 represents the height of the battery as 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity is around 200mAh. CR2032 typically has a lifespan of 5 years. If the manufacturer's production level is not high or quality control is poor, its lifespan will be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. If the usage environment is ideal (sealed, room temperature, free from moisture, etc.), its lifespan can be further extended to 8 years or even 10 years. The usage time of the vehicle remote key battery is closely related to the frequency of use. The more frequently it is used, the shorter the usage time will be. If the remote key battery runs out of power, you can directly use the mechanical key to open the vehicle and start the engine. The batteries used in car remote keys are button batteries, mainly three types: CR2016, CR2025, and CR2032. For the specific model used in each vehicle, owners can refer to the battery model in the user manual for replacement. Button-type CR2016 battery: The usage rate of this battery in car key remotes is very high, making it one of the most common car remote batteries. The voltage of this battery is 3V, while most car key batteries are powered by 9V, so three batteries need to be replaced each time. Examples include Guangben, Toyota, Volkswagen, Mazda, etc. CR2016 specifications: battery diameter 20mm, thickness 1.6mm. Button-type CR2025 battery: Its usage rate is much lower than that of CR2016. However, it is still used in some car keys. It is thicker than the 2016 model but has a relatively higher storage capacity. CR2025 specifications: battery diameter 20mm, thickness 2.5mm. This type of battery is also commonly used in audio remotes. Button battery CR2032: Its thickness is twice that of CR2016. The 3V-CR2032 lithium-manganese battery belongs to the lithium-manganese dioxide structure. The positive electrode material is chemically very stable manganese dioxide, the negative electrode material is metallic lithium, and the electrolyte is a lithium battery. The main components of the electrolyte are dimethoxyethane, propylene carbonate, and lithium perchlorate. Its shape resembles a button, hence it is also called a button lithium battery or lithium-manganese button battery.
Was this review help?
19
4
Share
OBrynlee
08/12/25 10:02am
Last time my car key failed, I researched and found that the Audi Q2L key uses a CR2032 coin battery. Changing it yourself is actually super simple—you can buy the same model at the supermarket for just five bucks. When replacing it, remember to use a coin to pry open the key shell, and gently lift the small clip on the old battery. Once, my friend mistakenly bought a CR2025, but it was too thin, causing poor contact—wasted half a day for nothing. Keeping a couple at home is pretty handy; they usually last about two years before needing replacement. If you notice the remote range shortening or the button light dimming, it’s basically a sign the battery is running low.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

How to Adjust Overly Advanced Ignition Timing?

Adjusting the ignition timing involves calibrating and correcting the ignition moment when installing the distributor onto the engine, ensuring the high-voltage spark from the ignition system ignites the air-fuel mixture in the cylinder precisely. During engine operation, loosen the distributor's fixing screw. If ignition occurs too early, rotate the distributor housing in the direction of the distributor shaft rotation; if ignition is too late, rotate the housing in the opposite direction. When adjusting the ignition advance angle, perform the following checks: 1. On-vehicle ignition timing check: With the engine at normal operating temperature (70~80°C) and idling, suddenly accelerate. If the engine speed increases rapidly accompanied by brief and slight detonation (mild knock) that quickly disappears, the ignition timing is accurate. If the engine speed does not increase with throttle opening, the engine feels sluggish, and the exhaust emits a "popping" sound, ignition is too late. If the engine produces severe metallic knocking, i.e., detonation (knocking), ignition is too early. 2. Using an ignition timing light: Locate and verify the top dead center (TDC) mark for cylinder 1 at the end of compression and the ignition advance angle mark on the flywheel or front crankshaft pulley. Clean these marks to ensure visibility. If marks are unclear, highlight them with chalk or paint for better identification.
4
4
Share

What vehicle components should be checked before driving on the highway?

Here is a detailed introduction to the components that should be checked before driving on the highway: 1. Check tire pressure: Insufficient tire pressure can easily lead to a blowout. 2. Check engine oil: It is necessary to check the engine oil in the engine compartment when the vehicle is in a cold state. After the engine cools down, pull out the oil dipstick. The oil level should be within the minimum upper limit/maximum upper limit range on the dipstick, and should not exceed the marked interval. 3. Brake fluid check: The brake fluid in the engine compartment has a special marking. Brake fluid is usually located at the top of the engine compartment. Brake fluid has excellent water absorption properties. If the water content is too high for a long time, it can cause the brake fluid to overheat, leading to brake fade.
15
1
Share

How Many Kilometers Should a Truck's Wheel Hubs Be Maintained?

The manufacturer recommends maintenance every 20,000 kilometers. As long as the brakes do not return properly and the vehicle does not slide on slopes, maintenance is required, regardless of the specific mileage. Vehicle inspection items are as follows: 1. Tires: Check tire condition/wear and adjust pressure if necessary; 2. Lights: Inspect the working condition of the lighting system (headlights, indicator lights, emergency signal lights, trunk lights, passenger compartment lights, glove box lights, dashboard warning lights, etc.); 3. Washing Equipment: Check the working condition of the windshield wipers and washing equipment/inspect wiper blade position/wear; 4. Exterior Body: Visually inspect the exterior body, underbody protective components, pipes/hoses (exhaust---fuel lines---brake lines), and the condition of rubber components (dust covers, bushings, spacers, etc.).
5
3
Share

How to remove the adhesive from the car's ETC?

Adhesive from the car's ETC can be removed using an eraser. Here is some information about car ETC: 1. ETC Concept: ETC stands for Electronic Toll Collection, which is an automatic tolling system for highways or bridges. It uses a vehicle-mounted electronic tag installed on the windshield to communicate with microwave antennas at toll station ETC lanes via dedicated short-range communication. This system processes payments through computer networking technology with banks, allowing vehicles to pass through highway or bridge toll stations without stopping to pay fees. 2. ETC Applicability: ETC is particularly suitable for use on highways or in busy bridge and tunnel environments. Currently, there are dedicated ETC toll lanes at highway toll stations.
10
3
Share

6.8-meter Truck Freight Calculation

6.8-meter trucks generally consume 25-30 liters of fuel per 100 kilometers. Since they are typically used for short-distance transportation, fuel costs account for 50%-60% of the total transportation expenses. Additional calculations are required for off-peak seasons, return trips, multiple stops, and waiting times. Below is more information about 6.8-meter trucks: 1. Dimensions of a 6.8-meter truck: The cargo compartment is 6.8 meters long, 2.35 meters wide, with a floor height of 1.25 meters from the ground, sideboard height of 1.8 meters, total height of 4 meters, loadable height of 2.65 meters, and total truck length of 9.2 meters. 2. New regulations on load capacity for 6.8-meter trucks: According to the new regulations for 2-axle trucks, the total weight of the truck and its cargo should not exceed 18 tons. A 6.8-meter truck, which is a 2-axle truck, weighs approximately 8 tons, giving it a load capacity of 10 tons. 3. Calculation of cargo volume for a 6.8-meter truck: The cargo volume for a 6.8-meter high-side truck is calculated by multiplying the internal length, width, and height of the cargo compartment. For example, a 6.8-meter high-side truck can carry 38 cubic meters (6.7m × 2.3m × 2.5m) when space is fully utilized, though typically it can carry around 35 cubic meters.
13
4
Share

What is the mechanism of electrochemical corrosion?

Electrochemical corrosion occurs when metal materials come into contact with an electrolyte solution, leading to corrosion through electrode reactions. Here is a partial introduction to electrochemical corrosion: 1. Overview: Electrochemical corrosion is a redox reaction. In this reaction, the metal loses electrons and undergoes oxidation, a process known as the anodic reaction. The reaction products are metal ions that enter the medium or metal oxides (or insoluble metal salts) that form on the metal surface. Meanwhile, substances in the medium gain electrons from the metal surface and undergo reduction, a process known as the cathodic reaction. 2. Characteristics of the reaction process: Under certain conditions, oxidizers in non-electrolytes directly interact with atoms on the metal surface to form corrosion products.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.