What is the battery model for Nissan X-Trail car key?

1 Answers
DelRowan
07/30/25 5:22am
Nissan X-Trail car key uses a CR2025 battery. Be careful not to touch the internal circuits and electronic connectors during the replacement process, as this may damage the circuit and cause the key to malfunction. Steps to replace the Nissan X-Trail car key battery: Press the button on the back of the key to remove the mechanical key; Use appropriate tools to remove the battery cover, and you will see the battery; Remove the key battery for replacement. Do not touch the internal circuits and electronic connectors, as this may cause malfunctions. However, you can hold the edges of the battery. Grabbing the battery across the contacts will significantly weaken the battery's stored power; When installing the battery, ensure the positive side of the battery faces the bottom of the case, then close the cover. Finally, press the button to check if the function is normal. If the Nissan X-Trail's smart key system warning light flashes green, it indicates that the smart key battery is nearly depleted.
Was this review help?
1
3
Share
More Forum Discussions

Which country produces BMW cars?

BMW cars are produced in Germany, and its models include: rs3, rs4, rs5, rs7, rs8, etc. Taking the 2020 BMW rs7 as an example, it belongs to the mid-size car category, with body dimensions of: 4777mm in length, 1866mm in width, and 1398mm in height, a wheelbase of 2826mm, a fuel tank capacity of 58l, and a trunk capacity of 480l. The 2020 BMW rs7 features a five-link independent suspension both in the front and rear, and is equipped with a 2.9t twin-turbocharged engine, delivering a maximum horsepower of 450ps, a maximum power of 331kw, and a maximum torque of 600nm, paired with an 8-speed automatic transmission.
2
0
Share

Does the Baojun 310 Have Airbags?

Baojun 310 is equipped with airbags. The function of automotive airbags is to protect passengers by reducing impacts with interior components, evenly distributing the collision forces on the head and chest, and absorbing the kinetic energy of the occupants, thereby complementing the effectiveness of seat belts. Taking the 2020 Baojun 310 as an example, it belongs to the compact car category with the following dimensions: length 4032mm, width 1680mm, height 1450mm, wheelbase 2550mm, and a fuel tank capacity of 30 liters. The 2020 Baojun 310 features a MacPherson strut front suspension and a torsion beam rear suspension. It is powered by a 1.2L naturally aspirated engine, delivering a maximum horsepower of 80 PS, a maximum power of 59 kW, and a maximum torque of 112 Nm, paired with a 5-speed manual transmission.
10
5
Share

How to Adjust the Height of Car Lights?

Here is the tutorial for adjusting the height of car lights: 1. Adjust the light position: This is achieved by adjusting the corresponding knobs behind the headlights. The parts to be adjusted and the tools required vary depending on the car model, so it should be determined based on the specific model. Before adjusting, shine the headlights onto a wall and observe if the lights are misaligned, too high, or too low. 2. The adjustment wheel is usually marked with numerical gears: The numbers represent the height of the headlights, with higher numbers indicating a higher position. For example, position 0 is the initial setting, typically used when there is only the driver or the driver and one front passenger; position 1 is for a fully occupied car with no cargo in the trunk; position 2 is for a fully occupied car with evenly distributed cargo in the trunk; and position 3 is for the driver only with evenly distributed cargo in the trunk.
1
4
Share

How to Activate the Tire Pressure Monitoring System?

The method to activate the tire pressure monitoring system is: After installing the tire pressure monitoring system, it automatically activates without any additional operation. The functions of the tire pressure monitoring system are: 1. It will promptly alert when there is rapid or slow air leakage due to tire puncture; 2. It will alert when tire loosening causes unbalanced friction, leading to tire temperatures reaching 70 degrees Celsius to prevent tire blowouts; 3. It will alert when the tire pressure falls below the vehicle's set limit due to prolonged lack of inflation, preventing low pressure from causing tire temperature rise and blowouts. The reasons for the tire pressure monitoring system alarm are: 1. Tire replacement without resetting the tire pressure module; 2. Changes in tire pressure due to punctures; 3. Tire inflation without resetting the tire pressure monitoring system; 4. Prolonged vehicle inactivity leading to low tire pressure due to lack of inflation.
19
0
Share

Can the spare tire be left off the car?

Spare tires cannot be left off the car. If there is no spare tire in the car, when a tire problem occurs while driving, such as a flat tire on the highway or in a remote area far from the city, the car will be unable to continue moving, and you will have to call for rescue. Some spare tires are non-full-size tires, which can save storage space, be lighter in weight, and easier to replace. Due to the special material of spare tires, when using them, it is necessary to control the speed and promptly go to a repair shop for maintenance. Methods for maintaining a car's spare tire: 1. Maintain tire pressure. The car's spare tire also needs to be checked regularly, especially the tire pressure. It should be inflated at least once every six months. 2. Prevent corrosion. The spare tire is placed at the bottom of the trunk, so it is necessary to prevent liquids such as antifreeze and engine oil from leaking onto the surface of the spare tire, as prolonged exposure can corrode the spare tire.
15
0
Share

What are the symptoms of a faulty camshaft position sensor?

The symptoms of a faulty camshaft position sensor include: 1. Difficulty in ignition and engine starting; 2. Difficulty in accelerating when the engine is hot; 3. Increased fuel consumption, lack of power, and difficulty in acceleration; 4. Engine trembling while driving. The function of the camshaft position sensor is to collect the position signal of the camshaft and input it into the electronic control unit to determine the ignition timing and fuel injection timing. The measurement method for the camshaft position sensor is: 1. Unplug the sensor's connector, turn the key to the second position, and use a voltmeter to confirm voltage output from the power line; 2. Connect one lead of the voltmeter to the confirmed power line and the other lead to the remaining two lines to identify the ground line (the one with voltage) and the signal line (the remaining one); 3. Turn off the key, connect the signal line, plug back the connector, and start the engine.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.