What is the battery model for Nissan Sylphy car key?

1 Answers
MacBrody
07/29/25 9:31pm
The battery model for Nissan Sylphy car key is CR2025 button battery. The remote key utilizes the wireless remote control function of the central locking system, allowing you to unlock and lock the doors from a distance without inserting the key into the lock. Taking the 2021 Sylphy as an example, it is a compact car with body dimensions of: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, and fuel tank capacity of 50L. The 2021 Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122PS, maximum torque of 155Nm, and maximum power of 90kW, paired with a 5-speed manual transmission.
Was this review help?
16
3
Share
More Forum Discussions

What are the impacts of resetting after disconnecting the battery in an Octavia?

The impact of resetting after disconnecting the battery in an Octavia is that the battery settings and memory data will be lost. When replacing the battery, it is important not to disconnect the power to avoid the hassle of resetting after replacement. The battery is a consumable part in a car, typically lasting 3 to 4 years under normal conditions. As the number of charge and discharge cycles increases, the battery's performance will decline, necessitating regular replacement. If the battery's storage capacity is poor, it may cause difficulties in starting the engine or even prevent it from starting altogether. The Octavia is a sedan under SAIC Skoda, with body dimensions of 4572mm in length, 1769mm in width, and 1462mm in height.
7
3
Share

How to Deal with Rusty Brake Discs on Geely Emgrand?

Geely Emgrand brake disc rust can be addressed by: 1. This is a normal phenomenon as brake discs are made of metal and are directly exposed to the air without protection, leading to oxidation and rust; 2. If there is only slight surface rust, you can remove it by continuously applying the brakes while driving. Gently press the brake pedal to allow the friction between the brake pads and the brake disc to polish the surface; 3. If the rust is severe, it is best to take the vehicle to a repair shop. Remove the brake disc, clean the rust with sandpaper, check the brake pad surface for any abnormalities, and conduct a road test after proper installation. Drive on a flat road and perform multiple braking actions to ensure there are no abnormalities.
18
4
Share

Why is the car not spraying windshield washer fluid?

The reasons why the car is not spraying windshield washer fluid are: 1. The wiper or the windshield washer fluid spraying system is damaged; 2. The nozzle is clogged, preventing normal spraying. The wiper is a blade structure installed in front of the windshield, composed of a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. Its main function is to clear rain, snow, and dust from the windshield that obstructs the view. Location for adding windshield washer fluid: Pull the engine compartment lever inside the driver's compartment to open the engine hood, locate the windshield washer fluid filler port, open the cap, and add the washer fluid. The symbol for adding windshield washer fluid is a spray-like symbol resembling the front windshield washer, and this symbol is generally standardized across all car brands.
14
4
Share

How Often Should the Spark Plugs Be Replaced on a Camry?

The spark plugs on a Camry should be replaced every 100,000 kilometers. The method for replacing the spark plugs is as follows: Use a T20 screwdriver to remove the cover plate screws above the spark plugs, then detach the vapor absorption tube and ignition coils. Once the ignition coils are removed, the spark plugs will be visible. A specialized spark plug wrench is required to extract the spark plugs. After removal, install the new spark plugs in the same manner, following the principle of removing and replacing one at a time. In terms of body dimensions, the Camry measures 4900mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. It features a MacPherson strut front suspension and an E-shaped multi-link independent rear suspension.
1
5
Share

What are the common warning lights in a car?

Common warning lights in a car include the tire pressure warning light, engine coolant temperature warning light, engine oil pressure warning light, and brake system warning light. To reset the tire pressure warning, press and hold the tire pressure reset button (SET button) for 3 seconds until you hear a beep, and the tire pressure warning light on the dashboard will disappear. There are generally two reasons for the tire pressure warning light: insufficient tire pressure or excessive tire pressure. If the tire pressure is insufficient, do not drive forcefully, as this can cause severe tire deformation, increased heat generation, leading to rubber fatigue, reduced toughness, and potential tire blowouts. It will also increase fuel consumption, accelerate tire wear, and shorten the tire's lifespan.
3
2
Share

What is China VI in automotive standards?

China VI in automotive standards refers to China 6. The China 6 emission standard imposes more stringent requirements compared to the China 5 emission standard, with stricter limits on pollutant emissions. The implementation of the China 6 emission standard will be carried out in two phases. Starting from July 1, 2020, all light-duty vehicles sold and registered must comply with the China 6a limit requirements. The second phase will begin on July 1, 2023, when all light-duty vehicles sold and registered must meet the China 6b limit requirements. Automotive emissions refer to harmful gases such as CO (carbon monoxide), HC plus NOx (hydrocarbons and nitrogen oxides), and PM (particulates, soot) released from exhaust gases, all of which are produced during the engine's combustion process.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.