What is the battery capacity of the BYD Han EV in kilowatt-hours?

2 Answers
LeAva
07/25/25 12:33am
The battery capacity of the Han EV is 77 kWh. Below is relevant information about the BYD Han EV: 1. Battery: The BYD Han EV is equipped with mass-produced lithium iron phosphate Blade Battery. By improving the space utilization within the battery pack, the energy density of the battery pack reaches 140 Wh/kg. The longest-range version of the model has an NEDC range of 605 km. The two-wheel-drive models come with two battery capacity versions: 65 kWh and 77 kWh, offering ranges of 506 km and 605 km, respectively. The four-wheel-drive version has a battery capacity of 77 kWh with a range of 550 km. The Blade Battery pack also adopts a high-voltage platform design, with an output voltage of 570V. With the support of an advanced thermal management system, the peak current can reach 800A. In fast-charging mode, the battery can charge from 30% to 80% in just 25 minutes. 2. Charging Ports: The BYD Han EV has charging ports located on both sides of the vehicle. The left side features a fast-charging port, while the right side has a slow-charging port. The slow-charging port is additionally equipped with an LED breathing light and a model-specific logo on the outer side.
Was this review help?
7
0
Share
LeGriffin
08/10/25 3:48pm
Answer 1
Was this review help?
9
4
Share
Expand All
More Forum Discussions

How to Reset the Maintenance Reminder for Toyota Sienna?

Here is the method to reset the Toyota maintenance light: 1. With the ignition switch off, press and hold the "Reset" button. 2. Turn on the ignition switch. 3. Release the "Reset" button and briefly press the "Clock Adjustment" button once. 4. The maintenance cycle display will enter reset mode and return to normal after several seconds. Here is some additional information: 1. The original purpose of the car maintenance light is to remind the owner to perform maintenance as soon as possible. Therefore, the owner should promptly visit a 4S shop for maintenance. After the maintenance is completed, the 4S shop will use a diagnostic tool to reset the maintenance light. 2. The quickest and most accurate method to reset the maintenance reminder light is to use a diagnostic tool. Generally, individual car owners do not have such equipment. It is recommended to reset the light at a 4S shop after maintenance or visit an external 4S shop for resetting.
6
3
Share

How to Determine if the Generator is Broken?

Methods to determine if the generator is broken: 1. The charging indicator light on the dashboard will illuminate, and the battery power will deplete quickly; 2. The generator may produce abnormal noises or emit a burnt smell when running; 3. After starting the generator for a few minutes and then turning it off, touch the generator. If it is very hot, it may indicate a short circuit, requiring replacement. The car generator is the main power source of the vehicle, functioning to supply power to all electrical devices (except the starter) and charge the battery when the engine is running normally (above idle speed). Based on the three-phase stator winding of a standard AC generator, additional winding turns and lead-out terminals are added, along with an extra set of three-phase bridge rectifiers. At low speeds, the output is from the original and additional windings in series, while at higher speeds, only the original three-phase winding provides the output.
12
4
Share

What Causes Severe Shaking and Jerking When Starting in First Gear?

Severe shaking and jerking when starting in first gear is usually caused by uneven or deformed clutch plates, or improper clutch adjustment. Relevant information is as follows: 1. Issues: Problems with the universal joint bearing or clutch pressure plate contact. Excessive carbon buildup in the engine combustion chamber, leading to incomplete combustion and affected power output. Loose engine mounting bolts, etc. Excluding personal driving habits, shaking during first-gear starts is generally due to excessive wear of the clutch pressure plate. 2. Manual Transmission: Manual transmissions primarily transfer power through the clutch, with the clutch pressure plate responsible for transmitting kinetic energy. The clutch pressure plate has a limited lifespan. Prolonged semi-engagement or the engine operating under excessive load can accelerate wear. When the clutch pressure plate wears to a certain extent, power engagement becomes less smooth, causing the car to shake and the engine speed to become unstable.
15
3
Share

How to Handle the Violation of Passengers Not Wearing Seat Belts?

If the driver fails to use the seat belt as required, a fine of 200 yuan and 2 demerit points will be imposed; if passengers do not fasten their seat belts as required, a fine of 50 yuan will be imposed on the violator. Below is relevant information about wearing seat belts in vehicles: 1. Relevant regulations: According to 'Road Traffic Safety Violation Points Scoring Standards' IV, if a motor vehicle driver commits any of the following violations, 2 points will be deducted; driving a motor vehicle on an expressway or urban expressway without fastening the seat belt as required. 2. Other regulations: 'Road Traffic Safety Law' Article 51: When a motor vehicle is in motion, the driver and passengers shall use seat belts as required, and motorcycle drivers and passengers shall wear safety helmets as required.
2
5
Share

What does the off light mean?

When the O/D-OFF indicator light on the car dashboard is illuminated, it indicates that the vehicle's overdrive has been turned off. The following is a related introduction about the car dashboard: 1. Introduction to the car dashboard: With the advancement of electronic technology and the emergence of new sensors and new electronic display components, car electronic dashboards have been rapidly adopted. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. 2. Function of the car dashboard: The car dashboard display is a device that reflects the working conditions of various vehicle systems, allowing real-time monitoring of the car's status and providing the driver with necessary operational parameter information. It serves as an important interface for information exchange between the driver and the car.
11
5
Share

How many kilometers can a car drive?

There is no mileage limit for a car to be scrapped. Below is the relevant information: 1. Early stage: Annual inspection is required once a year within the first 15 years, and every six months after 15 years. As long as the car can pass the inspection, it can be driven normally. 2. Later stage: If the car fails the inspection three times after repairs, it will be forcibly scrapped. Below are the penalties for driving a scrapped car on the road: 1. Fine: A fine ranging from 200 to 2000 yuan will be imposed on the driver. 2. Driver's license: The driver's license will be revoked. 3. Vehicle confiscation: The scrapped vehicle will be confiscated as a penalty.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.