What is the B gear?

1 Answers
LeJourney
07/25/25 2:44am
B gear is the braking gear. The following is a related introduction to gear positions: 1. P gear: Parking lock position. When the gear lever is moved into this position, the drive wheels are mechanically locked. The gear lever can only be moved into this position after the car has come to a complete stop. To move the gear lever out of this position, the brake pedal must be pressed, and the ignition switch must be turned on. 2. R gear: Reverse position. Move the gear lever into this position when reversing. The gear lever can only be moved into this position after the car has come to a complete stop. 3. N gear: Neutral position. When the gear lever is moved into this position, the transmission does not engage any gear. After the gear lever is moved into this position, no power is transmitted to the wheels, and the engine's braking function cannot be utilized.
Was this review help?
13
0
Share
More Forum Discussions

What are the differences between Mercedes-Benz S-Class and Maybach?

Mercedes-Benz S-Class and Maybach have the following differences: 1. The rear space of the Maybach is about 20cm larger than that of the S-Class, while other exterior configurations remain the same. The Maybach S-Class can be considered a luxury upgraded version of the Mercedes-Benz S-Class. 2. In terms of appearance, the new Mercedes-Maybach S-Class embodies luxury in every aspect, looking overall like a larger, longer, and more luxurious version of the Mercedes-Benz S-Class. On the side of the body, the Mercedes-Maybach S-Class has a body length of 5500mm and a wheelbase of 3365mm, which is 200mm longer than the long-wheelbase version of the S-Class.
14
3
Share

Which lights should be turned on when reversing?

When reversing, the reverse lights should be turned on. The reverse lights do not need to be manually activated; they will automatically turn on once the car is shifted into reverse gear. The reverse lights are installed at the rear of the vehicle to illuminate the road behind during reversing and serve as a warning to vehicles and pedestrians behind. Precautions for reversing: 1. Observe and understand the surroundings and road conditions before reversing, and ensure safety before proceeding; 2. Maintain a steady speed while reversing to prevent stalling or sudden backward acceleration, which could lead to accidents; 3. Try not to obstruct other vehicles while reversing. If another vehicle approaches, yield proactively and sound the horn in advance if there are people or obstacles nearby to prevent accidents; 4. Reverse in the intended direction and avoid deviating from it.
13
1
Share

What is the displacement of the Audi A6 35FSI?

Audi A6's 35TFSI engine has a displacement of 2.8 liters. The Audi A6 35TFSI uses a 2.8-liter turbocharged engine with 190 horsepower, a maximum power speed of 4200 to 6200 rpm, and a maximum torque speed of 1400 to 4100 rpm. The following is an introduction about TFSI: TFSI represents an engine technology. TFSI stands for T (Turbocharger) FSI (Fuel-Stratified-Injection, meaning fuel stratified injection technology in Chinese), which translates to turbocharged fuel stratified injection engine in Chinese. However, because the fuel in China does not meet the standard of "fuel stratified combustion," TFSI has come to mean turbocharged direct injection.
15
1
Share

What is the reason why the Ford Mondeo's taillights cannot be turned off?

If the rear seat light does not turn off when set to OFF, it indicates that the rear light switch is damaged or there is a wiring fault, and it needs to be inspected and repaired at a 4S shop. Normally, you can set the rear light to DOOR mode, which will turn on when the door is opened and turn off when the door is closed, making it more convenient without needing to adjust it manually. Relevant information about car lights is as follows: 1. Introduction: Car lights refer to the lamps on the vehicle, which are tools for road illumination during nighttime driving and also serve as signals to indicate various vehicle movements. 2. Reverse light: The reverse light automatically turns on when the driver shifts into reverse gear. It is a white, transparent light mainly used to alert vehicles behind that the car is reversing.
1
5
Share

What are the reasons why the Ford Focus brake pedal is hard to press?

When a car fails to start, it means the engine cannot be ignited, which consequently prevents the brake pedal from being depressed. This is the logical sequence of events. Therefore, a car's failure to start does not indicate a fault in the brake system. The automotive braking system is a hydraulic system. To ensure the brake pads press firmly against the brake discs, significant force is required. The brake system consists of a vacuum booster pump, master cylinder, wheel cylinders, brake pads, and brake discs. Brake maintenance methods include: 1. High-temperature resistance protection to prevent corrosion of the brake system, avoid brake pad seizure due to overheating, and eliminate brake squeal; 2. Clean oil stains, dirt, and friction dust from brake discs, drums, and all components to maintain optimal heat dissipation; 3. Regularly replace brake fluid; 4. Periodically inspect the thickness of brake pads or shoes.
11
4
Share

What are the trunk dimensions of the Ford Explorer?

Ford Explorer trunk dimensions are width 1000-1240mm, depth 430-2100mm, and height 790mm. Below is a relevant introduction to the Ford Explorer: 1. Vehicle positioning: The Ford Explorer is a mid-to-large-size SUV. 2. Interior: The 12.8-inch vertical touchscreen is equipped with the SYNC+2.0 infotainment system, offering GPS navigation, voice recognition control, multimedia entertainment, and more. Additionally, the L2-level Ford Co-Pilot360 intelligent driving assistance system comes standard across all models. 3. Powertrain: All models feature a high-spec 2.3T+10AT powertrain combination, with the engine delivering a maximum power of 276Ps and a maximum torque of 425Nm. The rear-wheel-drive model accelerates from 0-100km/h in just 7.6 seconds. Except for the base model, all other models come with a four-wheel-drive system, with fuel consumption around 12L per 100km.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.