What is the automatic transmission starting tutorial?
3 Answers
Automatic transmission starting tutorial: 1. First step, after the driver sits in the driver's seat, there is no need to step on the brake, just press the start button once, at this time the ACC light will turn on, then press it again, and the vehicle will perform a self-check; it is recommended not to skip the self-check step for every cold start, while the hot start can choose to skip. 2. Second step, step on the brake, then press the start button again to ignite and start; under normal circumstances, the engine will start within 3 seconds after pressing the ignition switch, if the engine is difficult to start, do not start frequently, let the starter rest for a while every 5 times to avoid burning out the starter. 3. Third step, release the foot brake, you can choose to warm up the car in place, the time can be determined according to the environment; specifically, you can look at the water temperature gauge on the instrument panel, when the water temperature reaches and stabilizes at about 90 degrees, it means the car warming is completed. 4. Fourth step, step on the foot brake again, shift to D gear, release the handbrake (for electronic handbrake, just press the button briefly); before starting, observe the road conditions clearly through the rearview mirror to see if it is suitable to start, and also honk the horn and turn on the turn signal to alert other vehicles and pedestrians. 5. Fifth step, slowly release the foot brake and start; after starting, you should quickly drive into the road and drive at the prescribed speed.
When I first got my driver's license, starting an automatic transmission car made me a bit flustered, but the steps are actually quite simple: First, sit in the driver's seat and confirm that the gear is in the P or N position—this is crucial to prevent the car from moving unexpectedly. Then, firmly press the brake pedal with your right foot—this action ensures the engine doesn't act up during startup. Next, turn the key or press the start button, and the engine will start running. After starting, don't rush to drive; listen to whether the engine sound is normal. Experienced friends told me that if there are unusual noises during startup, it could indicate a battery or brake issue. Finally, keep your foot on the brake, shift the gear to D, and prepare to move, then release the brake and gently press the accelerator. Remember, beginners often forget to press the brake before starting, which can trigger system errors and lead to unnecessary repairs. I recommend checking the brake fluid level weekly to keep your automatic transmission car in good health—ensuring peace of mind and safety.
After driving for over a decade, I've learned that automatic transmissions require good startup habits: Before sitting down, check your surroundings for safety to avoid hitting people or objects. Press the brake pedal and ensure the gear is in P before starting the engine—this step is crucial because some older cars can start in N, but it's unsafe. After starting, don't immediately shift to D; let the engine warm up for about 10 seconds, especially in winter to protect it. If the engine fails to start, common causes include a weak battery or not pressing the brake firmly enough, which should be addressed promptly to avoid delays. I've also picked up fuel-saving tips, like gently pressing the accelerator when starting to reduce fuel consumption. Regular maintenance checks on brake lights and gear sensors can prevent startup issues. In short, following these simple steps every time ensures smooth and hassle-free driving.
