What is the automatic following system called?

Can the Audi Q5L perform a launch start?

Audi Q5L can perform a launch start. Definition of launch start: A launch start means adjusting the engine speed to the maximum torque output platform using the transmission during startup, so that the engine starts to output maximum torque at the moment of starting, achieving optimal acceleration. A launch start is considered a traffic violation and will result in corresponding fines and deduction of driving license points. Precautions for launch start: Attempt it on closed roads or race tracks; Before performing a launch start, ensure that the engine coolant temperature, oil temperature, and transmission oil temperature reach normal levels; Allow at least 15 minutes for the transmission to cool down between two launch starts.

13

4

Share

What does mp1 mean on Volkswagen engines?

MP1 on Volkswagen engines refers to the naturally aspirated EA211 engine, where MPI stands for Multi-Point Injection. Engine Overview: A new generation of automotive engines under Volkswagen. This series is also the first four-cylinder engine to adopt a cylinder deactivation system, demonstrating significant advantages in improving fuel efficiency. Engine Technology: The all-new EA211 engine is one of the core technologies of Volkswagen's MQB modular platform, marking the first application of cylinder deactivation in four-cylinder engines. Volkswagen has now implemented this technology in small-displacement four-cylinder engines for the first time, further enhancing the already fuel-efficient characteristics of small-displacement engines with superior fuel economy.

1

5

Share

Is ABS a Must for Beginners Buying Motorcycles?

Beginners buying motorcycles do not necessarily need ABS. Relevant information is as follows: 1. Introduction: ABS refers to the Anti-lock Braking System in the braking system, which automatically controls and adjusts the braking force on the wheels, mainly to prevent skidding, spinning, fishtailing, and loss of directional control during emergency braking. 2. Function: It enables the shortest distance stable stop. It controls the vehicle's slip ratio, which is the difference between the vehicle body speed and the wheel speed divided by the vehicle body speed, expressed as a percentage. The formula is s = (v - rw)/v × 100%. A slip ratio of 0 indicates free rotation of the wheels.

6

3

Share

Reasons for Water Accumulation in the Main Driver's Compartment

Here are the reasons for water accumulation in the main driver's compartment: 1. Not closing the window during rainy days: After getting out of the car, failing to confirm whether the main driver's side window is tightly closed can allow rainwater to enter the main driver's compartment. Over time, this can lead to water accumulation under the main driver's compartment. 2. Issues with drainage outlets: If water continues to drip under the driver's compartment after ruling out human factors, it is necessary to inspect the car's drainage outlets. There are four drainage outlets in total—the front two are for sunroof drainage, while the rear two are for draining water flowing on the car.

11

4

Share

How to Use the Gears of a CVT Car?

P stands for Parking gear, used when parking (when turning off the engine and during prolonged idling). R stands for Reverse gear. In this gear, the transmission will automatically switch between gears 1 to 5 based on speed and throttle conditions. S stands for Sport mode. In this gear, the transmission can shift freely, but the shifting timing will be delayed. It should mean the same as the 1 in the new Accord. In this gear, the transmission will stay in 1st gear without upshifting. The snowflake button is for starting on slippery roads. When this button is pressed, the vehicle will start from 2nd gear instead of 1st gear.

4

Share

What causes the rear axle noise in Pajero V73?

Pajero V73 rear axle noise causes are detailed as follows: Improper tooth side clearance: Noise from improper tooth side clearance. When the preload of the main reducer bearings is normal, a metal impact sound occurs at the rear axle shortly after starting the car or during gear shifting. As the speed stabilizes, the impact sound turns into continuous noise. When the throttle changes abruptly, an irregular noise appears at the rear axle, which is generally caused by excessive tooth side clearance. Bearing wear: While driving, if the noise increases with higher speed and decreases or disappears when coasting, it is usually due to bearing wear or abnormal gear clearance. If the noise occurs when abruptly changing speed or going uphill, it indicates excessive gear meshing clearance.

7

3

Share

What is the automatic following system called?

Can the Audi Q5L perform a launch start?

What does mp1 mean on Volkswagen engines?

Is ABS a Must for Beginners Buying Motorcycles?

Reasons for Water Accumulation in the Main Driver's Compartment

How to Use the Gears of a CVT Car?

What causes the rear axle noise in Pajero V73?

Does the Volkswagen Passat Burn Engine Oil?

Does the Volkswagen CC require matching when replacing the water pump?

How to Claim Insurance for a Parked Car Flooded by Water?

What are the requirements for a Class B driver's license?