What is the automatic closing time limit for traffic accidents?

What is the fuel tank capacity of the Wuling Rongguang?

2021 Wuling Rongguang has a total of 9 models, all with a fuel tank capacity of 45 liters. The entire lineup is equipped with the L3C engine and a 5-speed manual transmission (MT), with all models featuring a mid-engine, rear-wheel-drive configuration. Among vehicles in the same class, the 2019 Wuling Rongguang V 1.2L van utility model has a fuel tank capacity of 45 liters. The 2021 Youyou 1.2L value model has a fuel tank capacity of 40 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing the tank. If fuel is added up to the tank opening during refueling, the actual amount of fuel may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is near E, it indicates low fuel, while nearing F means the tank is nearly full.

2

5

Share

Where is the tire pressure reset button on Wuling Rongguang V?

The tire pressure reset button on the Wuling Rongguang V is located on the control lever on the left side of the steering wheel. What to do if the tire pressure is insufficient: If no damage is visible on the car's tires, simply inflate them to the normal pressure and reset the tire pressure system. If inspection reveals a puncture, drive to a repair shop immediately for patching before reinflating. If the low-pressure warning reappears after inflation without visible tire damage, it may indicate rim deformation causing air leakage - inspect and replace the rim if necessary. Tire pressure monitoring system operation principle: Pressure sensors installed in tires measure air pressure, transmitting data wirelessly to a central receiver module. Hazards of low tire pressure: • Increased road friction coefficient raises fuel consumption • Heavy steering and vehicle drift compromise driving safety • Excessive tire movement causes abnormal heat generation • Degrades cord and rubber functions, leading to delamination/cord breakage • Intensified friction damages bead area through excessive rim contact • Multiplied ground friction rapidly heats and softens tires, risking blowouts • Increased tire deformation causes sidewall cracks and accelerated shoulder wear

7

2

Share

How to Control Direction with the Steering Wheel?

To control direction with the steering wheel, follow these steps: 1. Maintain an upright posture while actively steering, leaning against the backrest of the seat. Adjust the seat height and position to the correct state. 2. Keep your eyes looking straight ahead. Gently hold the upper left part of the steering wheel with your left hand and the upper right part with your right hand, keeping both hands relaxed and naturally lowered. Your thumbs should naturally point upward on the steering wheel, while the other four fingers lightly grip it from the outside in. 3. Ensure your hand movements are balanced to avoid unnecessary shaking: (1) First, adopt a safe hand position on the steering wheel. Place your left hand near the 9 o'clock position and your right hand near the 3 o'clock position. Grip the wheel firmly but not too tightly, with your thumbs resting naturally on top. (2) When turning the steering wheel, alternate your hands. For a full rotation, the left hand turns halfway, followed by the right hand continuing the motion. (3) Avoid using your right hand to reach across the wheel when turning left, as this may seem easier but is dangerous. In an emergency, your hand could get trapped or injured. (4) At high speeds (above 90 km/h), avoid sudden movements of the steering wheel. Even slight adjustments can cause the car to veer dangerously. Keep the steering wheel steady with slight movements, maintaining a firm but relaxed grip.

5

2

Share

How to Repair a Cracked Bumper?

The repair method for a cracked bumper is as follows: 1. First, open the hood and remove the bumper. 2. Align the crack in the bumper and secure it with transparent tape to prevent deformation or misalignment during the operation. 3. Plug in the prepared soldering iron and flip the bumper over to inspect the crack from the inside. Wait for the soldering iron to heat up, then use it to melt and fix the crack inside the bumper. Operate along the direction of the crack. 4. Use the prepared PP welding rod and a plastic welding gun (hot air gun) to weld along the crack. 5. Remove the transparent tape used earlier on the bumper crack and also use the soldering iron to go over the crack again. Then, use 400-grit coarse sandpaper to smooth the areas treated with the soldering iron and those needing touch-up paint. Once smooth, apply putty and let it dry. 6. Use wet sandpaper, starting with coarse sandpaper and then switching to fine sandpaper to achieve a smooth finish. Rinse and dry with a clean cloth, then wait for it to dry completely before painting. 7. Before spraying, shake the spray paint well. Maintain a distance of about 20 centimeters from the surface to be painted. Avoid spraying directly to ensure even coverage. Maintain an angle and allow about 15 minutes between each coat, applying around five to six coats in total. 8. Let it dry for a few hours, then reattach the front panel of the bumper. This completes the crack repair.

6

0

Share

What Causes Better Power When Cold and Poor Power When Hot?

Better power when cold and poor power when hot could be due to carbon deposits inside the engine. It is recommended to check the throttle body and spark plugs. More details are as follows: 1. The reason for a dirty throttle body with carbon deposits is that when the car is started, air passes through the air filter and reaches the throttle body. This air mixes with fuel for combustion, which is never 100% efficient. The incompletely burned exhaust gases leave residues in the intake tract and throttle body, forming carbon deposits. Additionally, prolonged use of the air filter can produce impurities that adhere to the throttle body, accumulating over time to form sludge. This can lead to poor engine acceleration, increased fuel consumption, unstable idle, and fluctuating RPMs. 2. Since the throttle body is the 'throat' of the car and the air-fuel mixture cannot burn completely, carbon deposits in the throttle body are inevitable. Therefore, cleaning is necessary. 3. During use, spark plugs develop normal carbon deposits on their electrodes and insulator skirts. If these deposits are not cleaned over time, they can accumulate to the point of causing electrode leakage or even failure to spark. Hence, carbon deposits should be cleaned regularly, not just when the spark plugs stop working. 4. There are many types of spark plugs, each with its own economic lifespan. Using them beyond this lifespan can negatively impact engine performance and fuel efficiency. Research shows that as spark plugs age, the center electrode tip becomes rounded, and the side electrode develops a concave shape, increasing the electrode gap and making discharge difficult, which affects normal engine operation.

18

3

Share

What should be noted when changing to snow tires?

Precautions for changing snow tires are as follows: 1. When changing to snow tires, replace all four tires together instead of just two. The stability of the car relies on the support of all four tires; having only two snow tires can easily cause the vehicle to veer off course. 2. Don't wait until it snows to change to snow tires. Prepare in advance because when it snows, there will be a lot of people changing tires, leading to price increases and long queues. 3. Don't mistakenly believe that snow tires consume more fuel or are noisier. Tests have shown that the fuel consumption of snow tires is not significantly different from regular tires, and the noise level is not particularly noticeable. 4. Don't assume that good driving skills eliminate the need for snow tires. When skidding occurs, the car won't respond to steering wheel commands. Although snow tires have thick treads, they are narrower and have deeper grooves, making them less durable and thus have a shorter lifespan. They should be replaced after 2-3 winters at most. However, the storage method for snow tires is also important: 1. Don't store them on your balcony as prolonged exposure can cause decomposition, affecting your family's health. 2. Avoid placing them near the kitchen as grease fumes can corrode the tires. 3. Pack the tires and store them on a dedicated tire rack, avoiding stacking heavy objects on top to prevent deformation. Characteristics of snow tires: 1. They are made of special materials that maintain good traction in cold weather. 2. The tread patterns are unique; while regular tires have about 200 groove points, snow tires have over 1,000.

7

2

Share

What is the automatic closing time limit for traffic accidents?

What is the fuel tank capacity of the Wuling Rongguang?

Where is the tire pressure reset button on Wuling Rongguang V?

How to Control Direction with the Steering Wheel?

How to Repair a Cracked Bumper?

What Causes Better Power When Cold and Poor Power When Hot?

What should be noted when changing to snow tires?

How Far Can the Last Bar of Fuel in Wuling Rongguang Run?

Is There a Difference Between the Two Car Keys?

What to Do When Stuck in Traffic on an Uphill with an Automatic Transmission Car?

What is the fuel tank capacity of Wuling Rongguang in liters?