What is the Auto Start-Stop Indicator in Cars?

How Long Do Iridium Spark Plugs Last?

Iridium spark plugs should be replaced every 60,000 to 80,000 kilometers. Under normal maintenance conditions, automobile spark plugs are typically replaced after traveling 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type. It is recommended to follow the guidelines in the user manual. The following standards can be referenced for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris such as leaves or dust and ensure everything is cleaned thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the removed high-voltage distributor wires according to the firing order, then secure the cover.

18

3

Share

Why is the Elantra door light not working?

The Elantra door light may not be working due to a burnt-out bulb or a damaged circuit. Check the wiring and replace the bulb if necessary. Here are the steps to install car welcome lights yourself: 1. Remove the door panel; 2. Drill a small hole on the bottom of the door panel with a screw drill; 3. Fix the light fixture on the door panel; 4. After securing the welcome light, connect the power wires to the positive and negative terminals of the door light and test if it works properly; 5. After successful testing, reattach the door panel. Additional information: 1. Door welcome lights are mainly used at the car door position, and the logo on the welcome light varies depending on the car model. Currently, there are over 100 logo options available to suit the preferences of a wide range of car consumers. The first function of car welcome lights is to showcase the brand's noble temperament, and the second is to illuminate the path to the door for passengers, creating a welcoming feeling. 2. The LED light source is refracted through a lens onto a film, and then the specific logo image is projected onto the illuminated object by the lens behind the film. A series of optical reactions achieve the desired effect, which is the internal structure of the welcome light.

3

1

Share

How to use Lynk & Co's wireless charging?

Lynk & Co's wireless charging is located below the center console, in front of the gear lever. Simply place your phone on the wireless charging spot to start charging. Here is some relevant information about wireless charging: 1. The prerequisite for using wireless charging is that your phone must support the wireless charging function. Wireless charging is very convenient for phones that support it. Wireless charging technology can be divided into two types: mobile phone wireless charging technology and vehicle wireless charging technology. 2. Vehicle wireless charging technology provides convenience for car owners, eliminating the need for charging cables, saving space inside the car, and solving many problems brought by traditional charging methods. Using charging cables while driving can significantly affect driving safety. 3. The advantages of vehicle wireless charging technology include convenience, time-saving, and safe charging. However, wireless charging technology also has some drawbacks: it is slower than using a data cable, and the charging efficiency is not high. 4. There are three types of wireless charging technologies: electromagnetic induction, magnetic resonance, and microwave radiation. The wireless charging technology used in mobile phones is electromagnetic induction, which charges through electromagnetic induction between coils. Almost all products currently on the market use this technology.

5

Share

How long can a vehicle be started after wading through water?

Whether a vehicle can be started after wading through water depends on the extent of the wading. The specific situations are as follows: 1. No damage: If the electronic system and engine of the car are not damaged after wading through water, it can be started immediately. 2. Severe wading: If the engine stalls due to severe wading, the engine should not be restarted. Restarting the engine in this case may cause serious damage to the car's engine. Extended information: Reasons for abnormal noises after a vehicle wades through water: 1. Brake pads getting wet: If the vehicle wades through shallow water and water splashes onto the brake pads, it is normal to hear abnormal noises when braking. In this case, just drive normally, and the noise will stop once the brake pads dry. 2. Foreign objects between the brake pads and calipers: If the vehicle wades through shallow water and foreign objects such as plastic bags or mud get stuck between the brake pads and calipers, abnormal noises may occur when braking. This can be resolved by cleaning the brake pads. 3. Water ingestion in the exhaust pipe: If the vehicle wades through deep water and water enters the engine through the exhaust pipe, it may prevent the fuel and air mixture in the engine from burning properly, resulting in abnormal noises. In this case, the vehicle should be moved out immediately, and the engine should be cleaned. Otherwise, it may lead to engine failure or even total engine damage. 4. Foreign objects stuck in the chassis: If foreign objects get stuck in the chassis after the vehicle passes through a wading area, abnormal noises may occur while driving. This can be resolved by cleaning the chassis.

4

3

Share

How long can the renewal of an expired driver's license be delayed?

Driver's license renewal after expiration can be delayed for a maximum of three years. If the license has been expired for more than one year but less than three years, the renewal can be processed by passing the subject one exam. Regulations on the expiration of a driver's license: If the license has been expired for less than one year, it can be renewed normally; if it has been expired for more than one year but less than three years, the license will be revoked, but it can be renewed by passing the subject one exam; if it has been expired for more than three years, the license will become invalid and cannot be renewed. Penalties for driving with an expired license: Driving a motor vehicle with an expired license is prohibited and will be treated as driving without a license. If the driver's license has been expired for less than one year, the driver can renew it at any time, but driving on the road will result in a fine of 200 yuan. If the driver's license has been expired for more than one year without renewal, the traffic management department will revoke it according to the law. If the expiration period is less than three years, the driver must retake and pass the subject one exam to restore the driving qualification. Driving on the road during this period will result in a fine ranging from 200 to 2000 yuan. If the driver's license has been expired for more than three years, it will be permanently revoked. To drive again, the driver must retake the driver's license exam. Otherwise, driving on the road will be treated as driving without a license, resulting in a fine of 2000 yuan and administrative detention for up to 15 days.

12

2

Share

Is the Highlander 2.0T Engine Imported?

The Highlander 2.0T engine is a domestically produced engine that utilizes Toyota's production technology and is manufactured at Toyota's Kyushu plant. The Highlander 2.0T engine model is the 8AR-FTS, with a maximum power output of 162KW, a maximum torque of 350Nm, and a maximum horsepower of 220. For daily maintenance of the Highlander 2.0T engine, the following methods can be employed: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, ensuring the selected standard meets or exceeds the manufacturer's requirements. Regularly replace the engine oil and filter. The quality of any lubricating oil will degrade over time with use. After a certain mileage, its performance deteriorates, leading to various engine issues. To prevent malfunctions, change the oil periodically based on usage conditions and maintain an appropriate oil level. As oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter element or force open the safety valve, allowing oil to bypass through the relief valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear to form sludge. In small amounts, the sludge remains suspended in the oil, but in larger quantities, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures the engine operates smoothly but also extends the overall lifespan of both the radiator and the engine.

16

4

Share

What is the Auto Start-Stop Indicator in Cars?

How Long Do Iridium Spark Plugs Last?

Why is the Elantra door light not working?

How to use Lynk & Co's wireless charging?

How long can a vehicle be started after wading through water?

How long can the renewal of an expired driver's license be delayed?

Is the Highlander 2.0T Engine Imported?

What brand is the H logo?

What does National 5 and National 6 vehicles mean?

What Causes Connecting Rod Bearing Noise?

Where is the Plane Bearing Located?