···
Log in / Register

What is the audio brand of the Passat?

1 Answers
VanNaomi
09/05/25 6:04am
The audio system in the Passat is the American FENDER brand. The most basic function of a car audio system is to reproduce sound, primarily consisting of three components: the head unit, speakers, and amplifier. The most direct way to evaluate the quality of an audio head unit is to examine its technical specifications. The key technical indicators of car audio systems include: Output Power: Most head units currently indicate their power output in terms of musical power, typically ranging between 40W and 60W. The power should not be excessively high. Frequency Response: The human ear can detect frequencies ranging from 20Hz to 20KHz. Therefore, this specification should at least cover this range, and the wider the range, the better. Signal-to-Noise Ratio: This refers to the ratio of the music signal to background noise. High-end car audio systems generally have a ratio above 90DB, and the higher this value, the better. Harmonic Distortion: This indicator reflects the fidelity of sound reproduction. A lower value indicates higher fidelity and better audio performance.
Was this review help?
19
3
Share
More Forum Discussions

What Causes a Motorcycle to Stall When Accelerating Due to Insufficient Fuel Supply?

It could be due to a lean fuel mixture, poor sealing of the engine crankshaft case, or issues with the engine reed valve. Detailed reasons for a motorcycle stalling when accelerating due to insufficient fuel supply are as follows: Reasons for a lean fuel mixture: Fuel needle adjusted too low; fuel level set too low; partial blockage of the main jet; loose or leaking carburetor connection; air filter not installed; fuel supply from the tank switch is insufficient. Poor sealing of the engine crankshaft case: Failure or leakage of the crankshaft oil seal on the generator side; leakage at the joint surface of the crankshaft case; leakage at the joint surface between the crankshaft case and the cylinder or incorrect piston installation direction. Engine reed valve issues: Damaged reed valve; incorrectly installed rotary valve, causing carburetor backfire.
12
2
Share

How to Replace the Key Battery for Kodiaq?

Turn the remote key upside up, first use a flat small screwdriver to slowly pry into the middle of the gap. The key will separate with a gap of about 2mm, then gently split the key apart along the middle seam by pressing both sides. Finally, remove the old battery and replace it with a new one. Additional information is as follows: Design Concept: The design inspiration of the ŠKODA Kodiaq comes from Bohemian crystal cutting craftsmanship, drawing heavily from natural elements such as mountains and waterfalls. It features precise and sharp lines, as well as well-defined folded surfaces to outline a robust body posture, fully embodying the concept of harmony between humans and the environment. In terms of details, the three-dimensional vertical waterfall grille, three-dimensional power waistline, and ice-crystal C-shaped LED taillights are all impressive. Appearance: The appearance of the Kodiaq Sportline is largely consistent with the standard version, with adjustments mainly made to some details. These include the front grille, side window trim, mirror housings, and roof luggage rack, all of which are treated with black paint to enhance the sporty feel. Additionally, the front and rear bumpers have undergone some minor adjustments, and the vehicle is equipped with a new style of wheel rims.
17
0
Share

What are the markings for motorcycle semi-slick tires?

Semi-slick tires do not have specific markings, but they can be identified by their appearance. Introduction to semi-slick tires: So-called semi-slick tires actually refer to more sport-oriented products compared to regular tires, featuring the characteristic that the tread softens when reaching operating temperature, generating high adhesion to improve grip. Function of semi-slick tires: Their lower weight and reduced aspect ratio enhance wheel sensitivity and tire contact area, while the stiffer sidewalls ensure less deformation during aggressive driving, and the tread blocks and fewer drainage grooves directly increase the tire's contact area with the ground.
15
0
Share

Can a Manual Transmission Shift Directly from 1st Gear to 3rd Gear?

Manual transmission can shift directly from 1st gear to 3rd gear. Parking on an uphill slope: In most cases, being able to park on an uphill slope indicates severe traffic congestion. During this time, whether the car rolls backward or stalls, it can have a serious impact on the vehicles behind. Many manual transmission drivers may not particularly favor hill-start assist, but in reality, hill-start assist is quite important. At the very least, it helps prevent the car from rolling backward or stalling when starting on a slope, which is a crucial function of hill-start assist. Releasing the brake: On roads equipped with hill-start assist, you can easily take your foot off the brake while maintaining a safe distance from the car in front. During the startup process, many procedures will naturally disappear. It also won't cause the car to brake, allowing it to move forward normally. At this time, the indicator light on the dashboard will also illuminate. Especially at high speeds, this hill-start assist is officially activated. If the indicator light does not come on normally, you should get out and check if there was a failure during installation.
15
4
Share

What are the reasons for motorcycle headlight not working?

The causes include loose wire connections, poor contact, short circuits, grounding issues, and excessively high voltage regulator settings. Detailed reasons for motorcycle headlight not working are as follows: Power supply failure: If the fault occurs between the power switch and the power line, the grounding test method can be used to check the lamp switch terminal and related wires in sequence for any short circuits. Poor contact at the bulb base: If the test at the power terminal of the lamp switch shows good results, remove the bulb to check if the filament is burned out. If the bulb is confirmed to be in good condition, then check whether the copper piece on the bulb socket is bent or deformed, causing poor contact with the bulb base. Adjust the copper piece to ensure proper contact.
16
2
Share

Does a Two-Year Inventory Period Affect Motorcycles?

As long as there is no damage and it can be driven normally, there will be no impact. Mandatory Scrapping of Motorcycles: The most important point is that Chinese law stipulates a mandatory scrapping period of 13 years for motorcycles, generally calculated from the date of registration. However, if the registration date exceeds the manufacturing date by more than two years, the scrapping time is calculated from the manufacturing date. In other words, purchasing a three-year-old inventory motorcycle means the scrapping period is only 10 years. Motorcycle Storage Methods: Like other motor vehicles, inventory motorcycles also depend on storage methods. However, motorcycles are stored individually in boxes, and with proper care, there should be no issues. For motorcycles stored for a long time, pay attention to the condition of the engine oil.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.