What is the approximate temperature for 60% oil heat?

2 Answers
DelilahDella
07/25/25 5:57am
During normal vehicle operation, the engine's standard working temperature for oil is approximately between 90~110 degrees Celsius. Therefore, 60% oil heat should be in the range of 70-90 degrees Celsius. Before reaching normal temperature: The engine's standard working temperature is around 90~110 degrees Celsius. Before reaching this temperature, the fuel supply system remains cold, making it difficult to fully vaporize gasoline efficiently. Under such conditions, combustion is less effective for engine startup. During this phase, the engine relies on the choke valve to restrict some air from entering the cylinders, increasing the fuel-air mixture ratio and raising the engine speed to prevent stalling. After reaching normal temperature: Once normal operating temperature is achieved, the automatic choke valve returns to its standard position through mechanical action. Hence, for vehicles that have been idle for extended periods, it is advisable not to drive within the first minute after startup. Instead, let the engine idle for about a minute to warm up.
Was this review help?
12
0
Share
LeAngela
08/10/25 5:59pm
I've been driving for over a decade and have encountered oil temperature issues several times. During normal engine operation, the oil temperature typically ranges between 90 to 110 degrees Celsius, which is the ideal state ensuring optimal lubrication and engine component protection. Right after starting the car, the oil temperature is quite low, maybe around 20-30 degrees. It rises to 50-60 degrees within five minutes of driving, but reaching 60-70 degrees is just a transitional phase. The temperature stabilizes above 90 degrees after about half an hour of driving, which is considered normal. If the oil temperature is too low, such as during short trips in cold weather, the oil becomes too thick and provides insufficient lubrication, increasing engine wear. If it's too high, exceeding 120 degrees, the dashboard warning light might come on, usually indicating a cooling system or oil circulation malfunction, requiring immediate parking to check the radiator and oil quality. I usually monitor the oil temperature via the dashboard display or onboard diagnostic tools to avoid overlooking this small detail that could lead to bigger problems. Developing a habit of regular oil changes also helps prevent abnormal oil temperatures and ensures driving safety.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

How to Clear the Anti-Skid Malfunction Light?

The steps to clear the anti-skid malfunction light are: restart the engine and briefly press the ESP OFF button on the vehicle. The reasons for the anti-skid malfunction light to illuminate are as follows: 1. Accidentally pressing the ESP OFF button. 2. Loose or faulty sensor connectors. 3. Short circuit in the wiring or related fuse blown. 4. Software issues causing poor signal transmission. 5. ABS pump failure. The anti-skid system, also known as the vehicle stability system, is a chassis braking technology developed based on the anti-lock braking system (ABS). It mainly consists of a control unit, steering sensor, wheel speed sensor, skid sensor, lateral acceleration sensor, etc. It enables automatic vehicle safety control, effectively improving the driving stability and safety of the vehicle under dynamic conditions such as braking, acceleration, and steering.
3
5
Share

What are the charging methods for new energy vehicles?

New energy vehicle charging methods: 1. Portable charging; 2. Home charging station charging; 3. Public charging station charging. Portable charging: Generally comes with electric vehicle purchases. New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources, integrating advanced technologies in vehicle power control and driving aspects, forming automobiles with advanced technical principles, new technologies, and new structures. New energy vehicles include four major types: hybrid electric vehicles (HEV), battery electric vehicles (BEV, including solar-powered vehicles), fuel cell electric vehicles (FCEV), and other new energy (such as supercapacitors, flywheels, and other high-efficiency energy storage devices) vehicles. The promotion of new energy vehicles is aimed at addressing environmental protection and petroleum crisis needs, reducing or abandoning the combustion of traditional gasoline or diesel to drive internal combustion engines.
6
2
Share

What is the method to retrieve a card that has fallen into the car door?

The methods to retrieve a card that has fallen into the car door are: 1. Use a wire to hook out the card that has fallen under the door; 2. Remove the door panel to retrieve the card. The car door provides access for the driver and passengers, isolates external interference, and to some extent protects the occupants from side impacts. Car doors can be categorized by their opening methods into: 1. Forward-opening doors; 2. Reverse-opening doors; 3. Sliding doors; 4. Upward-swinging doors; 5. Folding doors; 6. One-piece doors; 7. Split doors. The design requirements for car doors include: 1. The maximum opening angle should be controlled between 65 to 70 degrees; 2. During the opening process, there should be no positional interference with other parts.
16
4
Share

Does the Haval M6 have a horn sound when locking the car?

Haval M6 has a horn sound when locking the car. Below are the specific details of the Haval M6: Dimensions: The Haval M6 is a compact SUV under the Haval brand, with a length, width, and height of 4649mm, 1830mm, and 1705mm respectively, and a wheelbase of 2680mm. Powertrain: The Haval M6 is equipped with a 1.5T turbocharged engine across the lineup, meeting the China VI emission standards. It delivers a maximum power of 110kW and a peak torque of 210 N·m. The transmission system is paired with either a 6-speed manual or a 7-speed wet dual-clutch transmission. Suspension: It features a front MacPherson and rear double-wishbone four-wheel independent suspension, with professional SUV chassis tuning.
17
4
Share

What are the steps to turn on the heater in a Passat?

The steps to turn on the heater in a Passat are: 1. After starting the vehicle, locate the air conditioning button on the center console; 2. Press the AC button to turn on the air conditioning system; 3. Use the fan speed button on the right to increase the air conditioning fan speed; 4. Use the temperature knobs on both sides to turn clockwise and raise the temperature. Taking the 2020 Passat Lingyu as an example, it belongs to the mid-size car category, with body dimensions of: length 4933mm, width 1836mm, height 1469mm, and a wheelbase of 2871mm. The 2020 Passat Lingyu is equipped with a 1.4T turbocharged engine, with a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, and is paired with a 7-speed dual-clutch transmission.
20
4
Share

Why does the Volkswagen Sagitar make noise when braking?

Volkswagen Sagitar's braking noise is caused by deep grooves formed around the brake disc, which creates friction between the brake pads and the edges of the grooves, resulting in noise. The Volkswagen Sagitar is a spacious A+ class comfortable sedan that perfectly combines German craftsmanship with modern dynamic styling. It is equipped with three types of engines: 1.4TSI, 1.8TSI, and 1.6L naturally aspirated. The 1.6L naturally aspirated 4-cylinder engine in the Sagitar is very mature in technology, with 4 valves per cylinder, which allows for smoother intake and exhaust compared to the previous generation's 2 valves per cylinder. In terms of body dimensions, the Volkswagen Sagitar measures 4544mm in length, 1760mm in width, and 1461mm in height.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.