What is the approximate fuel consumption of motorcycles?

3 Answers
DiLondyn
07/24/25 5:16pm
For ordinary motorcycles with a displacement of 100cc, the fuel consumption is approximately 2 liters per 100 kilometers, while 125cc motorcycles generally consume between 2.2 to 2.5 liters per 100 kilometers. There are many types of motorcycles, and fuel consumption varies depending on the displacement and type. Here are some fuel-saving tips for motorcycles: Purchase a motorcycle with a good engine performance: Undoubtedly, scooters with good engine performance (such as EFI types) are very fuel-efficient. Although they may be more expensive, they are cost-effective in the long run. Some low-quality scooters or mopeds may be cheap, but they are notorious for high fuel consumption. Pay attention to daily maintenance: In the daily maintenance of scooters, frequent oil changes and air filter replacements are crucial. It is recommended to change the oil every 1,500 kilometers (using high-quality oil) and replace the air filter every 2,000 kilometers. Additionally, remember to check if the tires are underinflated and ensure they are regularly inflated.
Was this review help?
14
3
Share
MacGabrielle
08/10/25 8:04am
I've been riding motorcycles for decades, and fuel consumption really depends on the specific model and riding habits. For small-displacement bikes, like 125CC underbone models, normal riding costs less than 2 cents per kilometer in fuel, which translates to about 1.8 to 2.5 liters per 100 kilometers. My 150CC bike averages around 2.3 liters, with monthly fuel expenses just a few hundred yuan. There are many influencing factors: road conditions are crucial—daily city riding in traffic can increase fuel consumption by 30%; conversely, steady highway cruising is more economical. Riding habits matter too—avoid aggressive acceleration and hard braking; proper maintenance like correct tire pressure and timely oil changes helps; weight is also important—carrying less load saves fuel. Overall, motorcycles are far more fuel-efficient than cars, but adjustments based on personal habits are key. Developing smooth riding habits can squeeze out a few extra kilometers.
Was this review help?
19
3
Share
Expand All
OAshley
09/26/25 2:06am
As a car enthusiast, I often use apps to measure fuel consumption. For common 250CC street bikes, the fuel consumption ranges from 2 to 3 liters per 100 kilometers, which is quite reasonable. For small-displacement scooters, it can be as low as 1.5 liters. However, for 600CC sports bikes on highways, it may exceed 5 liters. The key lies in technological upgrades: for example, installing fuel-efficient tires or opting for electric vehicles with zero fuel consumption. Smart devices like OBD can monitor real-time fuel consumption data. Engine displacement directly affects efficiency; maintaining a steady speed of 80 km/h on highways with stable engine RPM can actually consume less fuel than riding at low speeds. It's advisable to start smoothly and avoid aggressive driving, as well as planning routes to minimize detours. Overall, newer models with eco-modes are more reliable, though riding conditions like hot weather or high wind resistance can slightly increase fuel consumption.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

Is H11 a Low Beam or High Beam?

H11 is a single-filament headlight bulb, which inherently does not distinguish between high and low beams; if the bulb serves as either a high beam or low beam in an H11 configuration, it can be directly replaced when changing the bulb. Here is a partial introduction about high and low beams: 1. Both high and low beams are used to illuminate the road ahead of the vehicle. The difference between them lies in the distance they cover—one illuminates a shorter distance, while the other covers a longer distance. 2. Typically, low beams have an illumination range of about 30-40 meters with a coverage angle of approximately 160°; high beams, on the other hand, have more concentrated light with a brighter spot, allowing them to reach higher and farther distances.
16
3
Share

Can I Get an Assessment at a 4S Shop Without Repairing?

You can get an assessment at a 4S shop without repairing. Below is the detailed process for car insurance claims: 1. Report the Incident: Promptly call the national unified customer hotline for car insurance to report the incident, such as "Pacific Insurance" at 95500, "Taiping Insurance" at 95589, or "Ping An Auto Insurance" via the "Ping An Good Driver" app for online reporting. Insurance regulations stipulate that the policyholder must report the incident within 48 hours of its occurrence. If reported after 48 hours and the policyholder cannot provide relevant incident proof, making it impossible for the insurer to verify the incident's authenticity and the extent of the loss, the insurer reserves the right to deny the claim. 2. On-site Inspection: Upon receiving the report, the insurance company will arrange for an inspector to assist with on-site handling. The inspector will then indicate which claim materials are required, and these materials must be submitted to the insurer promptly after the incident is resolved. 3. Assessment: The assessor will evaluate the vehicle's damage and issue an assessment form. If the policyholder agrees with the amount on the assessment form and has no objections, they can sign to initiate the claim. If the policyholder believes the insurer's assessment is unreasonable, they should refuse to sign the assessment form. 4. Submit Claim Materials and Review: After the incident is resolved, submit the claim materials as required by the insurer. Upon receiving the materials, the insurer will complete the approval process as quickly as possible and notify the policyholder of the result. The review time depends on the claim amount; larger claims will take longer to review.
7
0
Share

What does the cruise control lim mean?

"LIM" is the speed limit function button, which means that after activating this function, the maximum speed can only reach the set limit speed, and even if you press the accelerator further, the speed will not increase. Here are some introductions about LIM (speed limit function): 1. LIM is different from cruise control. Cruise control maintains the speed, eliminating the need for the driver to press the accelerator pedal for a long time, allowing the driver to rest; while the speed limit function only limits the maximum speed of the car, and the accelerator still needs to be pressed by the driver. 2. When the accelerator depth is below 95%, the speed will not exceed the set speed, and the vehicle will alarm when reaching the set speed.
11
2
Share

How to Open the Door When the Camry Key is Locked Inside the Car?

Here are the solutions for when the Camry key is locked inside the car: 1. If the main key is accidentally locked inside the car, try to retrieve the spare key and use it to open the door. 2. Some cars have a button near the trunk area. As long as the car key is within 1 meter of the trunk, you can easily open it. 3. Use a thin string to unlock the car door's safety switch: Thread a thin string through the gap of the car door, with a retractable buckle tied at the front. When the buckle hooks onto the safety switch of the car lock, pull it upward forcefully to unlock the safety switch, thereby opening the car door.
13
5
Share

What does it mean to check the smart key start system?

Checking the smart key start system refers to the vehicle detecting issues with the smart key start system, which may be caused by system malfunctions, receiver trigger device failures, and other problems. The following describes the functions of the start system: 1. The start switch activates the starter electromagnetic switch circuit to power the electromagnetic switch; in gasoline engines, the start switch is combined with the ignition switch. 2. The start relay controls the on/off of the starter electromagnetic switch circuit through its contacts (normally open type). The start switch only controls the start relay coil circuit, thereby protecting the start switch. There are single-type (protecting the start switch) and compound-type (protecting both the start switch and the starter).
10
4
Share

How to Activate One-Touch Window Control in Mazda?

Mazda's one-touch window control buttons are located on the driver's door armrest. Below are the detailed activation methods: 1. Opening the Window (One-Touch Down) (1) Press the switch to the first position and hold until the window moves to the desired position. (2) Press slightly harder to the second position, and the window will automatically descend. 2. Closing the Window (One-Touch Up) (1) Lift the button to the first position (applying excessive force will reach the second position), and release once the window reaches the desired position. (2) Briefly pull the switch to the second position to automatically close the window.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.