···
Log in / Register

What is the approximate diameter of car wheels?

3 Answers
JohnLee
08/27/25 8:24am
Car tire diameters typically range between 60-80 centimeters. Car tire pressure: The normal tire pressure for cars is between 2.4 to 2.5 bar. There is usually a tire pressure standard label near the driver's side door. When driving normally in the city, follow the standard on this label to control the tire pressure. Some labels also specify the pressure for unloaded and loaded conditions, so refer to the pressure indicated on the label. Precautions: When going on long-distance trips, you can increase the tire pressure slightly. During high-speed driving, tire temperature tends to rise. Higher tire pressure results in less deformation of the tire, which generates less heat. The tire pressure actually affects the car's shock absorption. If you feel that the vehicle's shock absorption is poor, you can slightly reduce the tire pressure.
Was this review help?
18
4
Share
AdrianMarie
09/09/25 7:05am
Car wheel diameters generally range between 14 to 22 inches. Based on my years of driving experience, the size makes a noticeable difference. Most regular sedans use 15 or 16-inch wheels, while SUVs often have 18 to 20-inch ones. Smaller wheels offer better fuel efficiency but compromise comfort, showing more bumps on rough roads. Larger wheels provide better visibility and stable handling, but come with higher tire costs and increased fuel consumption. My car has 17-inch wheels - they deliver excellent stability on highways though I need to be cautious about curb scratches when parking. The actual diameter is approximately 35 to 55 cm (make sure to convert units correctly). When choosing a car, I always compare sizes: too large affects off-road capability, while too small can be unsafe in rainy or mountainous conditions. Regular checks on tire wear and pressure are essential, ensuring the wheel size matches for safe and comfortable driving. Avoid reckless modifications to wheel sizes as they may cause problems.
Was this review help?
10
4
Share
Expand All
Orville
10/23/25 7:57am
Discussing car wheel sizes is really exciting, with the normal range being 14 to 22 inches. For example, economy cars might have 14-inch wheels, while sports cars or SUVs can go up to 20 inches or more. When I do modifications, I experiment with different sizes. Wheels above 17 inches noticeably improve handling and cornering stability, but the suspension might feel a bit stiffer. Changing wheels requires considering the suspension and speedometer calibration; otherwise, significant errors can increase risks. Larger wheels offer better tire grip and a visually striking appearance, but they also increase fuel consumption and tire replacement costs. Personally, I've tried 18 and 19-inch wheels, which strike a good balance between performance and daily driving. Wheel sizes are measured in inches, with diameters roughly ranging from 40 to 55 cm. During maintenance, don’t forget to clean the rims—safety is paramount, not just the looks.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

Is it necessary to clean the car air conditioning evaporator?

It is necessary to clean the evaporator. Because the car air conditioning evaporator operates in a damp and stuffy environment, it is prone to breeding harmful bacteria. If the evaporator is not cleaned regularly, harmful bacteria will multiply in large numbers, posing a threat to the health of passengers. Moreover, due to the small interior space of the car, bacteria are more easily transmitted, creating significant health risks. Therefore, it is recommended to clean the car evaporator regularly. Below are the detailed details: 1. Introduction: The car air conditioning evaporator is an important refrigeration component in the car air conditioning system, which is in a closed state with a dark and humid internal environment. Fine impurities, dust, germs, nicotine, etc., in the air can easily adhere to the evaporator with condensed water, accumulating over time and forming a large amount of dirt, which can breed harmful bacteria. 2. Principle: The evaporator is a very important component among the four major refrigeration parts. Low-temperature condensed liquid passes through the evaporator, exchanges heat with the outside air, vaporizes and absorbs heat, achieving the refrigeration effect.
20
3
Share

Can China III vehicles still be transferred and re-registered?

Since July 2011, China III vehicles nationwide cannot be transferred or re-registered. Starting from 2017, only China V vehicles can be registered and licensed. The so-called China III standard refers to China's third-stage vehicle emission standard. The national third-stage emission standard is equivalent to the European Euro III emission standard, meaning the content of tailpipe pollutants is similar to Euro III. The difference is that new vehicles must be equipped with an OBD, or On-Board Diagnostics system. The characteristics of the On-Board Diagnostics system include an increase in detection points and detection systems, with oxygen sensors installed at both the inlet and outlet of the three-way catalytic converter. It ensures compliance by real-time monitoring of vehicle emissions, thereby better guaranteeing the implementation of the Euro III emission standard. When vehicle emissions fail to meet the Euro III standard due to factors like fuel quality, implementing the China III standard will increase the cost per vehicle. To stably meet the China III vehicle emission standard, vehicles must be equipped with technical measures that ensure pollutant emissions comply with the China III standard, along with the use of fuel that meets the Euro III standard.
3
1
Share

Who Ultimately Owns the Vehicle in an After-Sale Leaseback?

In an after-sale leaseback, the vehicle ultimately belongs to the lessee. Here are the relevant details: 1. Contract Stipulations: Generally, upon lease expiration (after payment of the equipment buyout price and the final rental installment), the lessor is considered to have fully fulfilled all contractual obligations. At this point, the lessor should issue a "Certificate of Ownership Transfer" to the lessee within one week, transferring ownership of the leased asset to the lessee. In other words, ownership of the asset should then belong to the lessee. 2. Article 12, Section (1) Provisions: The lessor may terminate the contract and, in accordance with Article 97 of China's "Contract Law," demand compensation from the lessee for losses incurred due to the inability to return the leased vehicle.
18
5
Share

What are the consequences if a car sunroof is left open and water gets in?

Leaving a car sunroof open and allowing water to enter can have the following effects: 1. Drain holes blockage: Rainwater from an open sunroof can clog the drain holes at the four corners of the sunroof frame. If the water is not drained in time, it may overflow and soak the interior trim panels around the sunroof or the sunroof switch. 2. Water leakage inside the car: This can manifest as water seepage/leakage around the A-pillar to the door area, or from behind the rear seats to the trunk. 3. Internal component failure: Water entering the car due to an open sunroof can wet internal parts, leading to short circuits in the wiring. If the water hasn't dried, starting the car may fail. 4. Malfunction of electronic components, center console, and buttons: Water ingress from an open sunroof can cause faults in the car's electronic components, center console, and buttons. It's important to open the car doors immediately, enhance ventilation for drying, and place desiccants to aid in drying the interior. 5. Soaked interiors can breed bacteria: Water entering the car through an open sunroof can wet the interiors, such as fabric seats, which may absorb water and breed bacteria, potentially leading to mold. It's crucial to dry them promptly to avoid affecting usability.
5
1
Share

What is Automotive Data Restoration Sheet Metal?

Automotive sheet metal data restoration refers to the rapid repair of minor damages. Sheet metal technology is more refined than traditional sheet metal flattening, achieving a paint-ready surface without the need for putty application. Below are relevant introductions: 1. Impact dents and protrusions: Dents and protrusions on sheet metal parts can be repaired using hammering or pulling methods, with different approaches applied based on specific conditions. Of course, the repair process varies depending on the extent of the damage, and the material of the vehicle body must also be considered. 2. Warping and skew deformation: Sheet metal parts may experience warping, skewing, or other deformations due to impacts, scratches, or improper usage. These can be addressed through mechanical methods or flame heating and hammering techniques. The primary cause of deformation in damaged sheet metal parts is the stretching of related sections. Using heat shrinking methods to eliminate tensile stress can restore the original shape.
4
5
Share

Is it problematic to add 98 octane gasoline when 95 octane is not fully used up?

95 octane and 98 octane gasoline should not be mixed. If you occasionally add the wrong gasoline grade, simply switch back to the correct grade after using it up. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles requiring lower octane, accidentally using higher octane gasoline will not cause damage, but the increase in octane rating will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance as experienced by the driver. For vehicles requiring higher octane, using lower octane gasoline can cause engine knocking. Because the octane rating is too low, the reduced ignition point may cause premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance will develop during the upward stroke. This resistance makes the engine run very unevenly. If the knocking is imperceptible, it only increases noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring. Besides checking the appropriate gasoline grade in the vehicle's manual, you can also find it on the fuel cap. Typically, the gasoline grade can also be determined by the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92 octane, while those between 10.0-11.5 should use 95 octane. However, with the use of new technologies, the compression ratio alone cannot determine the required gasoline grade. High compression ratio engines can be tuned to use lower octane gasoline because other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline grade, the higher the octane rating and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.