What is the appropriate tire pressure in spring?

1 Answers
AdelynLynn
07/29/25 1:18pm
Tire pressure is generally normal between 2.2-2.5 kPa. In spring, when the temperature is around 20 degrees Celsius, the tire pressure should be maintained at 2.3-2.5 kPa. However, as the temperature and road surface temperature gradually rise, especially during high-speed or long-distance driving, the tire pressure can easily increase, which may lead to tire blowouts. In summer, road surface temperatures can reach 60-70 degrees Celsius. If the tire pressure is too high while driving, even slight contact with weak spots on the tire can easily cause a blowout. Here is some information about tire pressure: 1. Tire pressure, strictly speaking, refers to the air pressure inside the tire. In car maintenance, the engine is the heart of the car, and its damage can lead to the end of the car's life. Similarly, tire pressure is like the blood pressure of the car, and its level plays a crucial role in the car's performance and power. 2. Air pressure is the lifeline of the tire. Both too high and too low pressure will shorten the tire's lifespan. Low pressure increases the deformation of the tire body, leading to cracks on the tire side and causing flexing movements, which generate excessive heat, accelerate rubber aging, fatigue the cord layers, and break the cords. It also increases the tire's contact area with the ground, speeding up wear on the tire shoulders. High pressure, on the other hand, overextends the tire cords, reducing the elasticity of the tire body and increasing the load on the car while driving. In case of impact, it can cause internal cracks and blowouts. Additionally, high pressure accelerates wear on the tire tread and reduces its resistance to punctures.
Was this review help?
13
3
Share
More Forum Discussions

How to Handle Sudden Engine Stall While Driving?

When encountering sudden engine stall while driving, the handling methods are as follows: For manual transmission vehicles, you can shift the gear lever to an appropriate gear according to the vehicle speed, then press the clutch and restart the engine; For automatic transmission vehicles, you can shift the gear lever to the N (Neutral) position, restart the engine, and then shift back to D (Drive) gear. Below is some relevant information about engines: 1. Function of the engine: After the thermal energy of gasoline burns and expands the gas in the sealed cylinder, it pushes the piston to perform work, converting it into mechanical energy. The car engine is the device that provides power for the vehicle, serving as the heart of the car, determining its power, fuel economy, stability, and environmental performance. 2. Types of engines: Depending on the power source, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid power systems, among others.
2
5
Share

Are Steering Wheel Shift Paddles Good?

Steering wheel shift paddles are excellent. With shift paddles, when the vehicle is in Drive (D), the driver can manually force a gear shift with their fingers at any time. This operation is particularly useful when rapid acceleration is needed for overtaking. Below is relevant information about steering wheel shift paddles: 1. Function: Shift paddles are gear-shifting devices found in some automatic transmission vehicles, allowing gear changes without using the gear selector lever by simply pulling the shift paddles. 2. Position: Shift paddles are generally located behind the steering wheel. When operating the shift paddles, the driver usually only needs to shift into Drive (D), Sport (S), or manual mode. Using the shift paddles, the driver can perform upshifts and downshifts without taking their hands off the steering wheel.
13
0
Share

Why does the seat belt buckle fail to pop out?

If the car seat belt buckle does not pop out when pressed, it may be due to prolonged use causing dirt accumulation inside the buckle. Cleaning the buckle with a cleaning agent can resolve the issue. Below is relevant information about seat belts: 1. Purpose and materials: Seat belts are safety components used in equipment, such as aircraft or during high-altitude work and performances, to ensure safety. The main materials are polyester, polypropylene, and nylon. Seat belts are not just webbing; besides the webbing, they are assembled with other components. 2. Types: Depending on the operation and wearing style, they can be classified as full-body harnesses or half-body harnesses. The parameters of seat belts include working load limit (WS) and breaking strength (BS). These parameters vary according to different standards and manufacturers.
15
1
Share

At What Age Can a Baby Use a Car Seat?

Generally, babies can sit up completely by seven months of age, so they can use a car seat after seven months. Allowing a child to sit in a car seat for extended periods too early can be detrimental to spinal development. A child car seat is specifically designed for children of different weights (or age groups), installed in a car to effectively enhance child passenger safety. Child car seats are classified based on the type of securing method, which includes the European standard ISOFIX system, the American standard LATCH system, and the seatbelt securing method. Car seats feature ergonomic designs tailored to children's body shapes, fully accommodating the physiological characteristics of children at different ages, ensuring exceptional comfort. Installation is simple and convenient, allowing even first-time parents to secure it properly within minutes. Clear buckles and adjustable straps make it easy to adapt to a child's growth, providing great convenience. Various models of child car seats offer targeted services, allowing users to choose the most suitable style based on their needs.
1
3
Share

What to Do When There Is Abnormal Noise from the Tires While Driving?

Reasons and solutions for abnormal noise from the tires while driving are as follows: 1. Rhythmic abnormal noise occurs at low speeds, and the noise diminishes at high speeds. Fault cause: The vehicle's four-wheel alignment is inaccurate, long-distance driving causes significant tire wear, leading to uneven tire wear and abnormal noise. Solution: First, perform a four-wheel alignment, then replace the tires. 2. Abnormal noise is not obvious at low speeds, but uniform noise occurs at high speeds. Fault cause: This phenomenon occurs when a wheel bearing of the vehicle is damaged. Solution: Go to a service station to diagnose the noisy part, determine the issue, and replace the tire.
8
5
Share

Where Can China V Emission Standard Vehicles Be Registered?

Cities where China V emission standard vehicles can be registered include Guangdong (except Guangzhou), Jiangsu (except Nanjing), Zhejiang (except Hangzhou), Sichuan (except Chengdu), Fujian, Guangxi, Ningxia, Hunan, Hubei, Xinjiang, and Yunnan. Below is relevant information about China V emission standard vehicles: 1. Registration conditions for China V vehicles: Some regions offer a three-month 'transition period' for new China V vehicles, during which eligible vehicles can undergo registration, modification, or transfer procedures. 2. Completion of formalities: New light-duty vehicles meeting China V emission standards that were in dealer inventory as of June 30, 2019, with manufacturing certificates or import documentation dated before this deadline.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.