What is the appropriate tire pressure in kPa?

2 Answers
RhettLynn
07/24/25 6:14pm
Car tire pressure is normal within the range of 230-250 kPa. Here is more relevant information: 1. Tire pressure depends on the manufacturer: The normal tire pressure for a car should be based on the manufacturer's recommended value, which can generally be found in the vehicle's user manual, on the label near the driver's door (B-pillar), in the drawer next to the driver's seat, or on the small door of the fuel tank cap. These sources will provide detailed information on the specific tire pressure for use. 2. Factors affecting tire pressure: Tire pressure is also significantly influenced by seasonal factors. In summer, when temperatures are high, tires tend to heat up during driving. High pressure can easily lead to tire blowouts, so the pressure should be slightly lower. In winter, tire pressure should be a bit higher than in summer due to thermal contraction and expansion. Therefore, the recommended tire pressure for cars in winter is generally between 250 kPa and 280 kPa.
Was this review help?
5
0
Share
MacJasmine
08/11/25 10:07am
What is the appropriate tire pressure in kPa? I've asked myself this question many times. As someone who has been driving for over a decade, I generally recommend referring to your vehicle's manual or the label on the door frame. Typically, passenger cars have a recommended pressure between 220 to 250 kPa, while SUVs might be slightly higher, around 260 to 300 kPa. The exact value varies depending on factors like vehicle weight and load conditions. Checking the pressure when the tires are cold—meaning after the car has been parked overnight—yields the most accurate results, avoiding any influence from heat. Low tire pressure poses significant risks, such as increased chances of a blowout or higher fuel consumption, and it can accelerate wear on the tire sidewalls. While higher pressure might save a bit of fuel, it reduces traction and compromises driving safety. I suggest keeping a simple tire pressure gauge in your car and checking the pressure monthly. Maintaining the correct pressure extends tire life and improves fuel efficiency. Also, remember to adjust with seasonal changes—slightly lower in winter and slightly higher in summer. Safety always comes first; taking two minutes to check before driving can prevent major issues.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What is the Difference Between Mechanical Supercharging and Turbocharging in Automobiles?

There are the following differences between mechanical supercharging and turbocharging in automobiles: 1. Different disadvantages. Mechanical supercharging: The most obvious issue with turbocharging technology is "response lag," which means the impeller's inertia causes a delayed reaction to sudden throttle changes. Even after improvements, the response time is still around 1.7 seconds, resulting in a delay in the engine's power output increase or decrease. Turbocharging: The acceleration effect is not very noticeable, and the difference from a naturally aspirated engine is minimal. It also consumes part of the engine's kinetic energy. Mechanical supercharging relies on a belt drive, and ultimately, the driving force still comes from the engine. 2. Different structures. Mechanical supercharging: The mechanical supercharger is connected to the engine crankshaft pulley via a belt, using the engine's speed to drive the internal blades of the supercharger, generating pressurized air that is sent into the engine's intake manifold. The overall structure is quite simple, with operating temperatures ranging between 70°C and 100°C. Turbocharging: The intake port of the turbocharger is connected to the exhaust manifold, and the exhaust port is connected to the exhaust pipe. 3. Different principles. Mechanical supercharging: It uses the engine's own power to drive a compressor for pressurization. The supercharger consumes engine power, and its speed changes with the engine speed, eliminating the issue of boost lag. It performs exceptionally well at low engine speeds but is limited by the engine's speed, resulting in insufficient boost at high engine speeds. Turbocharging: It utilizes the exhaust gases produced by the engine to drive a turbine in the exhaust pipe, which in turn drives a turbine in the intake pipe for indirect pressurization, without consuming the engine's power.
1
2
Share

Is the engine of the Asian Dragon 2.0 imported?

Asian Dragon 2.0 is equipped with an imported engine. Relevant information is as follows: 1. The Toyota Asian Dragon is paired with a 2.0-liter engine with the model code M20A, delivering a maximum horsepower of 178, a maximum power of 131 kW, and a maximum torque of 210 Nm. 2. It uses 92-octane fuel, with a hybrid injection fuel supply system, and complies with the latest China VI emission standards. 3. It comes in two versions: a fuel version with a 2.0-liter naturally aspirated engine and a hybrid version with a 2.5-liter naturally aspirated engine. It is paired with a CVT continuously variable transmission and an 8-speed automatic manual transmission.
3
5
Share

How to Determine if the PCV Valve is Faulty?

You can determine if the PCV (Positive Crankcase Ventilation) valve is faulty by checking whether blue smoke is coming from the exhaust pipe. Below are the hazards caused by a faulty PCV valve: 1. It can lead to engine oil burning, resulting in severe blue smoke from the exhaust. A faulty PCV valve causes oil to burn quickly, increasing oil consumption. 2. A faulty PCV valve allows oil vapor to enter the intake manifold and then into the cylinders for combustion, a phenomenon commonly referred to as 'oil burning.' In the short term, it only leads to oil burning, but if left unrepaired for a long time, it can cause engine seizure. 3. Symptoms may vary depending on the vehicle brand. It's advisable to visit a 4S store or a professional auto repair shop to seek assistance from experts.
14
0
Share

What Causes Coolant to Boil?

There are several reasons why a car may lose coolant due to boiling: 1. Radiator Cap Damage: If the radiator cap on the cooling system malfunctions, causing the steam valve to open at too low a pressure or remain constantly open, it can lead to significant steam leakage, resulting in coolant loss over time. 2. System Leakage: After prolonged driving, various parts of the car's cooling system may develop leaks, potentially causing coolant loss. 3. Engine Overheating: Continuous high temperatures or overheating of the engine can cause the coolant to boil and vaporize. A large amount of coolant may then escape through the radiator cap's steam valve, leading to coolant depletion. 4. Low Cooling Efficiency Due to Low Water Level: Checking the water level in the radiator is a routine daily task. When adding water, ensure it is not overfilled; the level should be between the maximum and minimum marks. 5. Non-Compliant Coolant: If the coolant does not meet the required standards, its boiling point may be too low, or its evaporation rate too high. During operation, excessive water evaporation can increase internal system pressure, leading to coolant loss.
19
3
Share

Where is the cabin air filter located in the V3 Lingrui?

v3 cabin air filter is located at the upper part of the passenger footwell. Below are the steps for replacing the cabin air filter in the V3 Lingrui: 1. First, pry off the cover panel next to the passenger seat. After removing the cover, unscrew the four 7mm bolts using a small socket wrench. 2. After removing the screws, take out the glove box. Note that there is a clip securing the glove box at the top. Carefully remove the glove box. 3. You will then see the cabin air filter housing. Remove the housing cover to access the original filter. 4. Take out the original filter and insert the new one. 5. Note: Ensure the arrow on the filter faces downward. Then replace the housing cover and reinstall the glove box.
12
3
Share

What Are the Functions of Driving Assistance?

Driving assistance consists of lane keeping assist, automatic parking assist, brake assist, reverse assist, and driving assist functions. Below is an introduction to the driving assistance system: 1. Lane keeping assist provides support for maintaining the lane while driving. It uses a camera to identify the lane markings. 2. In automatic parking assist, the reverse system mainly includes reverse radar and reverse camera, which alert the driver through warning sounds or visual rear conditions, enabling proactive avoidance to reduce accident damage. 3. Brake assist: Sensors determine whether to initiate emergency braking by analyzing the driver's pedal operation. The system can immediately apply maximum braking pressure to achieve the highest possible braking effect. 4. The reverse assist system uses ultrasonic and machine vision as detection methods for fully intelligent parking. 5. The driving assist function features ultra-strong anti-shake cameras for clearer images. To meet the requirements of mobile operation, all internal hardware and connectors are vibration-proof and reinforced.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.