What is the appropriate tire pressure for Xingrui?

[KalebAnn]

The tire pressure for Xingrui is generally 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. This data is based on the international GBT2978-2008 standard. The tire pressure of Geely Xingrui is displayed on the dashboard. The method to check the tire pressure monitoring in Geely Xingrui is: switch the dashboard display information by pressing the TRIP button on the steering wheel, select the tire pressure information display by pressing the up and down buttons on the steering wheel, and then click confirm. Generally, a tire pressure exceeding 2.8bar is considered too high, and a tire pressure below 2.0bar is considered too low. Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance; it will cause steering wheel vibration and deviation, reducing driving comfort; it will accelerate the local wear of the central tread pattern, reducing tire lifespan; the vibration of the car body will increase, indirectly affecting the lifespan of other components; it will cause excessive stretching and deformation of the tire cords, reducing the elasticity of the tire body, and increasing the load on the car during driving. Hazards of insufficient tire pressure: The friction coefficient with the road surface will increase, leading to higher fuel consumption; it will cause the steering wheel to feel heavy and prone to deviation, which are factors detrimental to driving safety; it will increase the movement of various parts of the tire, causing abnormal heating due to excessive rolling; it will reduce the function of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage to the bead area and abnormal wear; the friction between the tire and the ground will increase exponentially, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. If the vehicle is driven at high speed, it may lead to a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle with no seal on top and four small spikes at the bottom, with an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: It usually alarms when the pressure is below 1.8bar or above 3.0bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, the tire pressure was not reset in time, causing the tire pressure monitoring system to still record the previous data, and the tire pressure monitoring indicator light will come on. At this time, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure fault light to come on. For sensor damage issues, only a new replacement part can be used.