···
Log in / Register

What is the appropriate tire pressure for uy125?

4 Answers
CourtneyLynn
09/06/25 6:48am

The recommended tire pressure for the front wheel of uy125 is 1.8-2.5 bar, and for the rear wheel is 2.8-3.2 bar. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes heavy steering and easy deviation, which are factors detrimental to driving safety; Increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling; Reduces the functionality of the cord and rubber, leading to delamination or cord breakage, and excessive friction with the rim causing damage to the bead area and abnormal wear. Hazards of high tire pressure: Accelerates localized wear of the central tread pattern, reducing tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Causes excessive stretching and deformation of the tire cord, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects such as nails or glass on the road, they can easily penetrate the tire, and impacts can cause internal cracks and blowouts, leading to tire bursts.

Was this review help?
4
2
Share
VanAllison
09/18/25 6:29am

I used to ride the UY125 for quite some time, and tire pressure is something you can't take lightly. I usually inflate the front tire to around 25 PSI and the rear tire to 29 PSI, as recommended in the standard manual. Too low pressure can easily lead to flats and increased fuel consumption, while too high pressure makes the ride uncomfortably bumpy. In winter, tire pressure naturally drops a bit, so I check it every two weeks with a small tire pressure gauge—simple and convenient. If you frequently carry passengers or heavy loads, you can increase the rear tire pressure to 30 PSI, but don’t exceed the manual's recommendations. Stable tire pressure ensures safer riding, extends tire life, and saves on maintenance costs. Overall, referring to the owner's manual is the most reliable—it clearly states those values. Develop a habit of regular checks to avoid the hassle of leaks.

Was this review help?
11
1
Share
Expand All
McBenjamin
11/01/25 6:56am

Riding the UY125 for so many years, correct tire pressure is key to ensuring handling. A front tire pressure of 1.75 bar and a rear tire pressure of 2.0 bar is ideal, which is the manufacturer-recommended balance point. Too low pressure causes skidding in turns, while too high pressure makes braking less stable—I’ve experienced issues in the rain. Always measure in a cold tire state; don’t check right after riding under the sun. Regular checks prevent malfunctions, and even tire wear extends lifespan. In summer, tire pressure rises slightly due to heat, while in winter it drops—remember to adjust seasonally. Keep a digital tire pressure gauge in your bike box for easy access anytime. Safe and worry-free, riding becomes even more enjoyable.

Was this review help?
17
2
Share
Expand All
VonAngela
12/15/25 7:05am

To save money and stay safe, maintaining a tire pressure of 25 PSI for the front and 29 PSI for the rear on the UY125 is sufficient. I checked the standard values in the manual, and keeping it at this level is the most economical: reasonable fuel consumption, even tire wear, and it can last a few more months. Simply using a regular tire pressure gauge to check once a month is enough. When carrying heavy loads, increase to the upper limit of 30 PSI to avoid deformation. Moderate tire pressure ensures stable riding—don’t overlook its importance to avoid unexpected repair costs.

Was this review help?
3
1
Share
Expand All
More Forum Discussions

What is the Power Rating of an Electric Vehicle Charger?

Electric vehicle charger power ratings are as follows: 1. AC Charging Pile: Power rating of 7KW, using 220V single-phase power supply. 2. DC Charging Pile: Available in multiple power levels such as 30, 60, 100, 150, 200KW; The actual charging power can be determined based on the matching results between the electric vehicle's battery parameters and the charging pile, and it varies with the charging status. Relevant information about electric vehicles is as follows: 1. Electric Vehicle: (electric-vehicle) refers to a vehicle that uses electrical energy as the power source and is driven by an electric motor, belonging to the category of new energy vehicles. 2. Classification: Includes Battery Electric Vehicles (BEV), Hybrid Electric Vehicles (HEV), and Fuel Cell Electric Vehicles (FCEV).
13
1
Share

When to fully turn the steering wheel left during reverse parallel parking?

During left reverse parallel parking, it is best to fully turn the steering wheel to the right when the lower edge of the left rearview mirror is approximately 2-3 centimeters vertically above the sensor line. The key requirement is that there should be no pause during the maneuver, completely negating the practice in electronic pole tests of turning the steering wheel fully while stationary to identify markers. The steps for pole test operation are as follows: 1. Park the car 1.5 meters beside the parking space line. 2. When the rear of the car is approximately at the boundary line of two parking space widths, turn the steering wheel fully and reverse. 3. When you feel the front of the car is aligned, immediately straighten the steering wheel and continue reversing. Reverse pole parking, also known as reverse garage or reverse pole, is an assessment point in the driver's test. It involves correctly reversing the vehicle into a garage from both sides while in motion, primarily evaluating the driver's ability to operate the car in a confined space and their spatial awareness of the vehicle's movement.
2
5
Share

Where is the USB port on Tesla Model 3?

Tesla Model 3 has a total of four USB ports. The two ports provided for rear seat passengers are USB-C ports, located below the rear air vents; the USB port on the front passenger side is USB-A, while the one on the passenger side is USB-C. More relevant details are as follows: 1. Improved driving comfort: On June 5, 2018, Tesla upgraded the Model 3, enhancing driving comfort. The company not only upgraded the vehicle's suspension system but also improved the rear seat configuration. 2. Model 3 does not use an aluminum body: Therefore, the body size will be reduced by 20% to offset the impact of increased weight on range. The Model 3 is expected to have a range of around 320 kilometers. The super cool but impractical falcon-wing doors are canceled, as is the 3-second 0-60 mph acceleration, and the autopilot feature might also be removed. Tesla's fourth model, the Model 3, was released with a range of 346 km and a 0-100 km/h time of less than 6 seconds.
14
4
Share

What are the methods for detecting cylinder compression pressure?

Cylinder compression pressure can be detected using the following methods: 1. Using a cylinder pressure gauge. The detection steps are as follows: (1) Ensure the engine operates normally until the water temperature reaches above 75°C. (2) After stopping the engine, remove the air filter, use compressed air to clean the dust and dirt around the spark plugs or fuel injectors, then remove all spark plugs or fuel injectors and place them in order according to the cylinder sequence. (3) Insert the rubber adapter of the cylinder pressure gauge into the spark plug hole of the cylinder being tested, ensuring it is properly aligned and tightly secured. (4) Fully open the throttle and choke valves, and use the starter to rotate the crankshaft for 3-5 seconds (no less than four compression strokes). Stop rotating once the pressure gauge pointer indicates and maintains the maximum pressure. (5) Remove the cylinder pressure gauge, record the reading, and press the one-way valve to reset the pressure gauge pointer to zero. Measure each cylinder in sequence using the above method, with each cylinder measured no less than twice. 2. Using a cylinder pressure tester. (1) Detection with a pressure sensor-type cylinder pressure tester. (2) Detection with a starter current or starter voltage drop-type cylinder pressure tester. (3) Detection with an inductive discharge-type cylinder pressure tester.
14
1
Share

What should be paid attention to when practicing for Subject 2?

When practicing for Subject 2, it is important to: control the clutch steadily, adjust the rearview mirrors accurately, and remember the reference points taught by the instructor. Here are some additional details: 1. Clutch: The clutch is the key to controlling speed in Subject 2. It must be managed well and adjusted according to actual conditions. When shifting gears, the clutch must be fully depressed; when starting, the semi-engaged position of the clutch must be found before releasing the handbrake. During the test, the clutch should not be held still but should be slightly released and depressed in small movements. When encountering turns or slopes, release the clutch slightly, and when going downhill, depress the clutch a bit more. 2. Mindset: Many students feel overly nervous when first practicing Subject 2 due to their initial driving experience. Therefore, adjusting one's mindset is also a fundamental part of learning Subject 2. Before entering the test area, it is crucial to calm down and avoid panic to ensure coordination between hands and feet while following the instructor's guidance. 3. Brake: When starting, release the clutch first, then the brake; when stopping, depress the clutch fully first, then the brake to prevent stalling. 4. Steering wheel: Hold the steering wheel steadily with both hands always positioned at the 3 and 9 o'clock positions. When turning the wheel, one hand should lead while the other follows closely, avoiding crossing arms.
16
0
Share

Where is the rear air conditioning switch for the Wildlander?

The rear air conditioning vents of the Wildlander can be opened by simply rotating the knob to the 'on' position. The knob is located behind the center armrest. Car air conditioning refers to the air conditioning device installed in the vehicle, which can cool, heat, ventilate, and purify the air inside the cabin. It generally includes a cooling device, heating device, and ventilation system. The cleaning methods for car air conditioning are as follows: 1. Replace the dust filter: Replacing the dust filter is the simplest method, cost-effective and ensures smooth airflow. Most car owners with basic mechanical knowledge can perform this task themselves. In most compact cars, the dust filter is located under the front windshield, covered by the rain gutter. To replace the dust filter, lift the engine hood, remove the clips securing the rain gutter, and take off the rain gutter to access the dust filter. If the dust filter hasn't been used for long, it can be cleaned with high-pressure air. 2. Disinfect the external circulation air ducts: Remove the dust filter, start the vehicle, turn on the air conditioning, and set it to external circulation mode. Spray foam cleaner onto the dust filter area, and the external circulation air will draw the cleaner into the ducts, disinfecting the ducts, air conditioning evaporator, and heater core, and eliminating odors. The dirt will liquefy and drain out through the air conditioning outlet. After cleaning, it's best to replace the dust filter, ensuring fresh air flows from the vents.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.