What is the appropriate tire pressure for the Superb?

Where is the OBD interface located on the BAIC Huansu H2?

The OBD interface of the BAIC Huansu H2 is located below the left side of the steering wheel. More details are as follows: 1. The full English name of OBD is On-Board Diagnostics, and its Chinese meaning is the vehicle's self-diagnosis system. The placement of the OBD interface may vary depending on the type of vehicle, which needs to be determined based on the specific model. 2. The self-diagnosis system is mainly used to monitor the operating condition of the engine. During operation, the engine consumes fuel, and the combustion of fuel produces exhaust gases. The vehicle's self-diagnosis system continuously monitors whether the vehicle's exhaust emissions exceed the standard. If the vehicle's exhaust emissions exceed the standard, the OBD warning light will immediately illuminate to alert the driver, which is also a safety feature of the vehicle. 3. It is worth mentioning that, in addition to monitoring exhaust emissions, OBD can also detect the engine, catalytic converter, particulate filter, oxygen sensor, emission control system, fuel system, etc. 4. When there is a problem with the vehicle's operating condition, while issuing an alert, the OBD system will store the fault information in the memory, making it easier for maintenance personnel to diagnose the problem. It is recommended that car owners regularly maintain their vehicles during use to avoid problems that may affect normal operation.

16

5

Share

How to Remove the Headlight Switch of a Volkswagen?

When the Volkswagen switch is in the off position, press it inward with a little force, then turn it clockwise slightly, and pull it outward as a whole to remove it. More details are as follows: 1. The car light switch is mostly integrated into the lever-type switch on the left side of the steering wheel, but there are exceptions. Some models have a rotary knob-type light switch. Simply twist or move it to the designated position, and the corresponding exterior lights will illuminate, with the corresponding indicator also lighting up on the dashboard. 2. Generally, the low beam and high beam are referred to as car headlights. Turning the light switch to the low beam position will turn on the low beam, which is sufficient for daily driving needs. 3. However, there are special cases. If there are no streetlights on the roadside or the road is straight and long with poor visibility, please use the high beam.

7

5

Share

What is the method to reset the maintenance reminder for Kaiyi X3?

The method to reset the maintenance reminder for Kaiyi X3 is: After turning off the power, hold down the OK button on the steering wheel, then press the start button twice in succession (without starting the engine), and release the OK button after about 3-5 seconds, the indicator will disappear. More details are as follows: 1. As driving time increases, the wear and tear of internal components in the vehicle will gradually become more severe. To ensure the car operates normally, manufacturers have set up reminder indicators. After reaching a certain mileage, owners should promptly replace the components. After successful replacement, the maintenance reminder light needs to be reset. 2. The function of the light is to record the usage mileage of some important components, much like a timer in a sprint race, serving as a reminder for both the car owner and maintenance personnel. 3. Many car owners reset the corresponding maintenance reminder light after replacing car components, which is an official recommendation and something many owners are willing to do. If the owner replaces the relevant components but does not reset the light, it will not affect the vehicle's performance, but it may cause trouble for the next component replacement: it will be difficult to accurately know the usage time of the new components. 4. The 2017 Kaiyi X3 still uses a 1.6L-DVVT engine, with a maximum power of 93 kW and a maximum torque of 160 N·m. Its characteristic of high torque at low speeds makes it suitable for stop-and-go urban road conditions. Especially when overtaking or changing lanes, there's no need to deliberately increase the engine speed to quickly gain power, which not only makes driving more effortless but also helps reduce fuel consumption.

13

2

Share

How often should the coolant in a Volkswagen car be replaced?

Generally, it should be replaced every two years or 40,000 kilometers. Coolant is a type of cooling liquid containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and protecting against scale and corrosion throughout the year. Precautions for using coolant: 1. Try to use the same brand of coolant. Different brands of coolant use different metal corrosion inhibitors, so mixing different brands is not advisable. 2. Most coolants have a validity period of two years (some products may last longer). When adding coolant, ensure the product is within its validity period. When replacing, drain the old liquid completely, clean the cooling system thoroughly, and then add the new liquid. 3. Avoid diluting with water. Traditional inorganic coolants should not be diluted with water, as this can cause sedimentation, severely affecting the coolant's normal function. Organic coolants can be diluted with water, but excessive water should be avoided. 4. For vehicles using coolant, never top up directly with tap water. Instead, use distilled or deionized water. If these are unavailable, boiled and cooled water is better than tap water. If coolant is lost due to leakage, replenish with the same brand of coolant. Coolant should be used year-round; using tap water in summer is not scientific and may do more harm than good. 5. Some coolants may develop small flocculent precipitates after being stored for a year, which is usually caused by additive precipitation and does not require disposal. However, if large amounts of granular precipitates appear, it indicates the coolant has deteriorated and should no longer be used.

6

4

Share

What is the tire size of the new Santana?

The new Santana has two tire size models: 185/60R15 and 175/70R14. In 185/60R15, the first number 185 represents the tire width of 185MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and 15 represents the rim diameter of 15 inches. The middle letter "R" stands for radial tire. In 175/70R14, the first number 175 represents the tire width of 175MM, 70 indicates the aspect ratio of the tire section is 70%, meaning the section height is 70% of the width, and 14 represents the rim diameter of 14 inches. The middle letter "R" stands for radial tire. In terms of wheel design, the new Santana adopts a 15-spoke intensive wheel style. It uses Hankook KINERGY series tires, which focus on economy, featuring fuel-saving and wear-resistant characteristics. If you want to replace the tires yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car. The jack should be positioned under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hubcap, loosen the nuts counterclockwise. Do not completely loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts rotate instead of the tire; Turn the nuts counterclockwise until they are loose, repeat this step for all lug nuts, and completely remove the nuts; Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, and hand-tighten the nuts until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the tire is also marked with the following common data: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire. For practical use, such as "Standard rim 5.00F".

20

2

Share

Are Mercedes and Benz the Same?

Mercedes and Benz are not the same. Below are the differences between Mercedes and Benz: 1. Characters: Mercedes-AMG models usually have the AMG suffix added after the model name. Generally, modified cars have higher performance than the original models. Mercedes-Benz does not have the AMG suffix. 2. Production Company: AMG is a company under Mercedes-Benz. As it is a wholly-owned subsidiary of Mercedes-Benz, the modified models are sold directly by Mercedes-Benz. Mercedes-Benz is the parent company. 3. Direction: AMG is a company under Mercedes-Benz specializing in modifying high-performance Mercedes-Benz cars, while Mercedes-Benz is primarily responsible for developing new products.

18

0

Share

What is the appropriate tire pressure for the Superb?

Where is the OBD interface located on the BAIC Huansu H2?

How to Remove the Headlight Switch of a Volkswagen?

What is the method to reset the maintenance reminder for Kaiyi X3?

How often should the coolant in a Volkswagen car be replaced?

What is the tire size of the new Santana?

Are Mercedes and Benz the Same?

How to Use the Engine Auto Start-Stop Feature in the Verano?

What kind of engine oil is generally used for the Elantra?

How to Turn Off the Radio in Arrizo 5?

What is the tire size of the Mazda3 Axela?