What is the appropriate tire pressure for the Roewe RX5?

2 Answers
DonovanLee
07/24/25 7:14am
The appropriate tire pressure for the Roewe RX5 is generally between 2.3-2.5 bar. According to the international GBT2978-2008 standard, the standard tire pressure for standard tires is 2.4-2.5 bar. In summer, it is generally recommended to follow the lower limit of the standard tire pressure, such as 2.4 bar for standard tires. However, if the car is often parked outdoors, the tire pressure can be slightly lower than the standard by about 0.1 bar to prevent tire blowouts due to high temperatures. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: Usually, an alarm will be triggered if the pressure is below 1.8 bar or above 3.0 bar. In such cases, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will continue to record the previous data, causing the tire pressure monitoring indicator to light up. In this case, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor, which is used to monitor tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, it can also cause the tire pressure warning light to illuminate. For sensor damage, the only solution is to replace it with a new one.
Was this review help?
6
5
Share
VanRemington
08/11/25 2:57am
I've been driving the Roewe RX5 for over three years, and tire pressure is something you really need to pay attention to. The standard setting is usually between 2.3 to 2.5 bar, depending on your car's manual—there's also a label on the door frame that indicates it. In summer when it's very hot, the tire pressure might be slightly higher, but as long as it doesn't exceed the upper limit, it's fine; otherwise, the tires can wear out faster. In winter when it's cold, the tire pressure tends to drop, so it's advisable to check it monthly to ensure it stays within the standard range. Improper tire pressure doesn't just waste fuel—it can also make the car feel shaky, reduce handling stability, and pose safety risks. I remember once before a long trip, I didn't check, and while driving on the highway, the steering felt loose. Later, I measured the tire pressure and found it was only 1.8 bar—scared me enough to top it up immediately. Make it a habit to keep a tire pressure gauge in the car and adjust the pressure to the standard value when filling up. It saves money and gives peace of mind.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

Should Automatic Transmission Cars Shift to Neutral at Traffic Lights?

Automatic transmission cars should shift to neutral at traffic lights, and using the handbrake will be safer. Shifting to N (neutral) and applying the handbrake can save some fuel because the passive wheel in the torque converter of the transmission is in an idling state at this time, which does not increase the engine's operating load, thereby reducing fuel consumption. It is not recommended to use P (park) at traffic lights because shifting from P to D (drive) can easily cause a reverse movement, which may affect the vehicle behind and, in severe cases, lead to a rear-end collision. Of course, the driver would also bear some responsibility. Using D (drive) with the foot brake at traffic lights is also not ideal, as the passive wheel in the torque converter between the engine and transmission is fixed, creating a counterforce that acts on the driving wheel, increasing the engine's load. This can be understood as hindering the engine's operation, causing the engine ECU to increase fuel injection, leading to higher fuel consumption.
13
5
Share

Where is Renault produced?

Renault is produced in France. Renault is an automobile manufacturing and sales company founded by the Renault brothers, with its headquarters in Boulogne, France. It is also a long-established automobile manufacturer. The company's main products include Renault-branded cars, commercial vehicles, sports cars, racing cars, compact cars, mid-size cars, SUVs, and large vehicles (including trucks, construction vehicles, and buses). Taking the Renault Fluence as an example, it is a compact car with dimensions of 4620mm in length, 1810mm in width, and 1480mm in height, and a wheelbase of 2702mm. In terms of power, the Renault Fluence is equipped with 1.6-liter and 2.0-liter four-cylinder gasoline engines, with maximum power outputs of 110 horsepower and 140 horsepower respectively, paired with the Nissan Alliance's X-TRONIC CVT transmission.
19
1
Share

What are the body dimensions of the Audi Q7?

Audi Q7's body dimensions are: length 5069mm, width 1968mm, height 1716mm, with a wheelbase of 3001mm. The Audi Q7 is positioned as a mid-to-large-size SUV, which skillfully integrates sportiness, functionality, high technology, and luxury quality. The Audi Q7 is equipped with a four-wheel steering system. At low speeds, the rear wheels turn in the opposite direction when steering, reducing the turning radius and the width of the driving trajectory. At high speeds, the rear wheels turn in the same direction, improving wheel response speed, dynamic performance, and stability. Additionally, the four-wheel steering system effectively assists the intelligent parking system and trailer assist system.
17
0
Share

How to Replace Coolant in the New Sagitar?

The steps to replace coolant in the New Sagitar are: 1. Open the engine hood and prop up the support rod; 2. Open the cap on the coolant reservoir; 3. Loosening the cap allows for air release, making it easier to expel air; 4. After unscrewing the drain plug at the bottom of the coolant reservoir, drain the old coolant; 5. Reinsert the drain plug and pour in the new coolant. The New Sagitar is a compact car under FAW-Volkswagen, with dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, a wheelbase of 2731mm, featuring a front McPherson independent suspension and a rear multi-link independent suspension.
2
4
Share

What are the differences between new energy vehicles and conventional vehicles?

The differences between new energy vehicles and conventional vehicles are: 1. Different power sources: Conventional vehicles use gasoline as their power source; new energy vehicles use solar energy, electricity, natural gas, etc. as their power sources. 2. Different cores: The core of conventional vehicles is the engine, transmission, and chassis; the core of new energy vehicles is the motor, battery, and electronic control. 3. Different production costs: Conventional vehicles have a longer development history, and the production and assembly costs of parts from global automakers are relatively fixed; the production costs of new energy vehicles are much higher than those of conventional vehicles. In addition to the relatively higher total usage costs of new energy vehicles themselves, the production and labor costs for technical R&D and vehicle design of new energy vehicles are also at a relatively high stage currently.
1
5
Share

What Causes Severe Shaking During Car Ignition?

The reasons for severe shaking during car ignition are: 1. Misfire in individual cylinders; 2. Excessive carbon deposits in the engine; 3. Blockage in the intake and exhaust systems; 4. Damaged engine mounts. The car ignition system is designed for spark-ignition engines to operate normally by providing high-voltage electricity to the spark plugs in the correct firing order, ensuring a strong enough spark to ignite the combustible air-fuel mixture. The steps for starting a car are: 1. Ensure the car's handbrake is engaged and the gear is in neutral or P position; 2. Press the brake pedal firmly, and for manual transmission cars, also depress the clutch; 3. Insert the key into the ignition keyhole; 4. Turn the key in the starting direction and hold for 2 seconds to start the car normally.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.