What is the appropriate tire pressure for the Lavida?

1 Answers
MacVera
07/30/25 3:34am
The appropriate tire pressure for the Lavida is around 2.2 to 2.5. Tire pressure is very important for tires; it should not be too high or too low. If the tire pressure is too high, it will reduce the contact area between the tire and the ground, which can decrease grip and handling stability. If the tire pressure is too low, it may cause wave-like deformation during high-speed driving, increasing the risk of a tire blowout. The Lavida's body dimensions are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. The Lavida features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension. The body structure is a unibody design.
Was this review help?
18
4
Share
More Forum Discussions

How to reset the maintenance reminder for Audi A4L?

Here are the steps to reset the maintenance reminder for Audi A4L: 1. Press the CAR button to enter the vehicle settings. 2. In the settings interface, select "Service and Inspection," then use the rotary button to choose "Service Interval" under the submenu of "Service and Inspection." 3. Press the knob to confirm and enter the next submenu, where the first interface of "Service Interval" will appear. 4. Use the rotary button to switch to the second interface and follow the prompts to reset the service interval. The Audi A4L is equipped with two new green-efficient engines, featuring advanced technology, sufficient power output, stable acceleration, and impressive speed performance. Its exterior is stylish and sporty, with smooth and natural body lines, and the front design has received widespread acclaim.
10
5
Share

Is It Illegal to Add a Rear Spoiler to a Car?

Modifying a rear spoiler is considered altering the vehicle's appearance and is illegal, so it is not recommended to install one. Although the "Motor Vehicle Inspection Regulations" have relaxed some restrictions on vehicle modifications, the policy does not support rear spoiler modifications. Here is relevant information: 1. A car rear spoiler is part of aerodynamic design and is commonly seen on racing cars. Most factory-installed spoilers on civilian vehicles are not overly exaggerated, and some even use retractable spoilers. When a car is driving at high speeds, the air passing over the spoiler can increase downforce, improving driving stability. Additionally, a well-designed spoiler can reduce air resistance, achieving some fuel-saving benefits. 2. There are two methods for fixing a rear spoiler: destructive installation and non-destructive installation. Destructive installation involves drilling holes directly into the trunk lid and securing the spoiler with screws. This method is the most stable, but improper handling can easily lead to rust on the vehicle's body panels, requiring high craftsmanship. The other method uses 3M adhesive tape for attachment. 3M tape is relatively secure and convenient to remove before annual inspections, making it widely used. When removing the spoiler, avoid excessive force to prevent damaging the original paint.
18
2
Share

When will the National VI emission standard be implemented in Anhui?

The "Implementation Plan for the Battle Against Pollution by Diesel Trucks in Anhui Province" (hereinafter referred to as the "Plan") has been officially released. According to the Plan, the National VI emission standard for motor vehicles will be implemented in advance starting from July 1, 2019. Eligible new energy vehicles will be exempted from vehicle purchase tax, and the policy of reducing or exempting vehicle and vessel tax for energy-saving and new energy vehicles will continue to be implemented and improved. The following is a related introduction to the National VI emission standard: 1. The National VI standard, also known as the "National Sixth Stage Emission Standard for Motor Vehicles," includes "Limits and Measurement Methods for Emissions from Light-Duty Vehicles (China VI)" and "Limits and Measurement Methods for Emissions from Heavy-Duty Diesel Vehicles (China VI)." 2. The National VI standard, or the "National Sixth Stage Emission Standard for Motor Vehicles," is formulated to implement environmental protection laws, reduce and prevent pollution from vehicle exhaust, protect the ecological environment, and ensure human health.
15
0
Share

Can You Get the License Plate on the Same Day of Vehicle Registration?

It is not always possible to receive the license plate on the same day of vehicle registration. The specific circumstances are as follows: 1. Different number selection methods result in varying times to receive the license plate. If you choose a number through the "50-choose-1" method at the DMV, the license plate is usually issued faster, typically within 1-3 days. However, if you opt for a self-selected or customized number, the processing time is longer, usually taking 5-10 days. 2. The time to receive the license plate varies by region. In first-tier cities, where there are more people and higher population density, the processing time is generally longer. In contrast, smaller cities (tier 4 or 5) often have much faster registration processes, usually 2-3 days quicker than in larger cities. 3. Different methods of receiving the license plate also affect the time. Once the license plate is produced, users can choose to pick it up in person at the DMV or have it mailed. If you pick it up in person, you can install the plate on the same day. However, if you choose mail delivery, an additional 3-4 days for shipping will be required.
6
1
Share

What brand of car is Tang?

Tang is a brand under BYD Auto. The current drive configurations available for the Tang include: 1. Fuel; 2. Plug-in hybrid; 3. Pure electric vehicle. The BYD Tang comes standard with features such as a dashcam, front dual airbags and front side airbags, front and rear parking radar, an electronic anti-glare rearview mirror, child seat anchors, automatic unlocking upon collision, high-voltage system power-off protection during collisions, high-voltage system power-off protection for misuse, and high-voltage system active discharge. The vehicle is equipped with a Tri-motor Dual-mode powertrain system, consisting of a 2.0TI turbocharged engine and front and rear motors, enabling independent power output for the front and rear wheels.
11
5
Share

What to Do When a Volkswagen Tiguan Won't Start?

Here are the solutions for a Volkswagen Tiguan that won't start: 1. Jump-start: Position the two cars close to each other, connect the positive and negative terminals of the batteries, turn off all auxiliary electrical devices in the car, and start the vehicle with the dead battery. 2. Push-start: Utilize a downhill slope, turn on the ignition before starting the vehicle, shift the transmission into second gear once the desired speed is reached, quickly release the clutch pedal and accelerate. Reasons why a Volkswagen Tiguan might not start due to human operation include: dead battery, empty fuel tank, or incorrect gear position. Apart from improper operation, other possible causes could be a faulty starter motor, fuel pump supply issues, injector problems, sensor malfunctions, etc. For these more complex situations, it is advisable to seek professional assistance.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.