···
Log in / Register

What is the appropriate tire pressure for the Envision 28T?

3 Answers
StChase
07/29/25 5:30pm
The appropriate tire pressure for the Envision 28T is between 2.3 and 2.5. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. They are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must possess high load-bearing, traction, and cushioning performance. The Envision 28T is a mid-size SUV under SAIC-GM Buick, with dimensions of 4686mm in length, 1839mm in width, 1691mm in height, and a wheelbase of 2750mm. The Envision 28T features a 5-door, 5-seat SUV body structure, equipped with a turbocharged engine paired with a 9-speed automatic transmission.
Was this review help?
10
2
Share
BrodyRose
08/14/25 8:32am
Driving the Enclave 28T, I've noticed that tire pressure makes a big difference. For city driving, 2.5 bar feels most comfortable—it doesn't bounce too much over speed bumps. If I'm frequently on the highway or carrying heavy loads, I increase it to 2.6 bar, and the steering feels noticeably more stable. Checking the pressure in the morning before driving gives the most accurate reading; after driving, the pressure rises by about 0.2 bar. Don't forget to keep the spare tire at 3.0 bar for emergencies—it saved me once when I had a flat and needed to reach the repair shop. Remember, tire pressure naturally drops by 0.1 bar every month, and it drops even faster in cold weather, so check it regularly.
Was this review help?
14
1
Share
Expand All
LaHarrison
10/13/25 7:18am
After checking the manual, the manufacturer recommends 2.4 bar for cold tires as optimal. In practice, inflating to 2.5 bar in winter provides extra peace of mind, as firmer tires better compensate for low-temperature effects. Conversely in summer, don't exceed 2.45 bar to avoid potential bulging from heat. The repair manual confirms this vehicle has TPMS - false alarms often stem from temperature fluctuations. Once a pressure warning turned out to be just uneven heating from sunlight on the left tire; the alert cleared within five minutes after adjusting pressure. Keeping a portable inflator in the car proves quite practical.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

Which is More Fuel-Efficient: Turbocharged or Naturally Aspirated Engines?

In urban driving conditions, naturally aspirated engines are more fuel-efficient, while turbocharged engines perform better on highways. Below are the differences between turbocharged and naturally aspirated engines: 1. Power: With the same displacement, turbocharged engines deliver stronger power than naturally aspirated ones. 2. Maintenance: The higher power output of turbocharged engines may lead to faster performance and reliability degradation compared to naturally aspirated engines, resulting in higher maintenance costs over time. 3. Fuel Consumption: Under the same displacement, turbocharged engines tend to have worse fuel efficiency than naturally aspirated engines in city driving. However, they are more fuel-efficient on highways. 4. Manufacturing Cost: Turbochargers introduce an additional component, and due to their high-temperature, high-pressure working environment, they require higher-grade materials and precision manufacturing, making turbocharged engines more expensive than naturally aspirated ones.
12
2
Share

What is the remote control matching method for Mazda 6?

Mazda 6 key matching method is as follows: 1. Close all doors and open the driver's side door. 2. Insert the key into the ignition switch and complete three operations of turning the ignition switch on and off within 5 seconds. 3. Then close and open the door three times. On the third time the door is opened, the door lock switch will activate once. 4. Press the lock button on the remote twice, and the door lock switch will activate once again. 5. Remove the key, the door lock switch will activate twice, and the alarm horn will sound twice, indicating that the remote control matching is successful. Here is another method for Mazda 6 key matching: Mazda 6 can also choose to go to a 4S shop for matching. Using the 4S shop's dedicated computer and vehicle connection, the engine number, frame number, production year and other information of the vehicle can be read out, and then the password matching can be performed. After the smart card is matched, the key can be matched.
16
3
Share

What is the working principle of car air conditioning?

The working principle of car air conditioning mainly consists of the following four processes: 1. Compression process: The compressor sucks in the low-temperature and low-pressure refrigerant gas at the outlet of the evaporator and compresses it into high-temperature and high-pressure gas, which is then discharged from the compressor. 2. Heat dissipation process: The high-temperature and high-pressure superheated refrigerant gas enters the condenser, where it condenses into a liquid due to the reduction in pressure and temperature, releasing a large amount of heat. 3. Throttling process: The higher-temperature and higher-pressure refrigerant liquid passes through the expansion device, causing its volume to increase, and its pressure and temperature to drop sharply, exiting the expansion device in a mist form (fine droplets). 4. Heat absorption process: The mist-like refrigerant liquid enters the evaporator, where, since the boiling point of the refrigerant is much lower than the temperature inside the evaporator, the refrigerant liquid evaporates into a gas. During the evaporation process, it absorbs a large amount of surrounding heat, and then the low-temperature and low-pressure refrigerant vapor re-enters the compressor. This cycle repeats continuously, thereby achieving the purpose of lowering the temperature of the air around the evaporator.
8
4
Share

Where is the Insurance and Vehicle and Vessel Tax Certificate?

"Compulsory Traffic Insurance Policy" serves as the "Vehicle and Vessel Tax Certificate." Currently, the vehicle and vessel tax paid when purchasing a car is generally bundled with compulsory traffic insurance. Therefore, when purchasing compulsory traffic insurance, the vehicle and vessel tax must also be paid in full, and the invoice is issued on the same document. More information about the Vehicle and Vessel Tax Certificate is as follows: 1. The Vehicle and Vessel Tax Certificate is usually listed separately in the "Withholding Vehicle and Vessel Tax" section at the bottom right corner of the compulsory traffic insurance policy, showing the amount of tax paid, which is officially recognized. 2. Photo of the 12123 Vehicle and Vessel Tax Certificate. The photo of the Vehicle and Vessel Tax Certificate is mainly used to apply for an inspection-exempt label on the "Traffic Management 12123" mobile app. Many car owners are unsure where to take this photo. In fact, the Vehicle and Vessel Tax Certificate is included in the compulsory traffic insurance policy. Simply take out the compulsory traffic insurance policy and clearly photograph the information in the "Withholding Vehicle and Vessel Tax" section to submit it.
7
3
Share

What Causes Shaking When an Automatic Transmission is in D Gear?

Shaking when an automatic transmission is in D gear originates from the transmission because the gear is in D, which is the power connection state. Precautions for driving an automatic transmission: 1. The S gear is not a cure-all. Typically, the S gear is used when overtaking at high speeds. 2. For prolonged stops at red lights, use the foot brake. If waiting at an intersection for an extended period, it's advisable to shift the car into N gear and engage the handbrake. Keeping the foot on the brake for too long can cause the fuel temperature in the transmission to rise excessively. 3. Frequent pressing of the accelerator consumes more fuel. If the driver deliberately presses the accelerator hard during normal driving, the automatic transmission's computer may interpret this as a need to accelerate for overtaking, thus downshifting to increase torque. Frequently pressing the accelerator hard not only increases fuel consumption but also accelerates abnormal wear on the automatic transmission gearbox.
17
1
Share

What is the tire model number?

Tire model numbers are mostly marked in the format like: 215/70R15. The meanings of these numbers are as follows: 1. 215 indicates the tire section width, the unit is mm. Generally, tire widths range between 145—285mm, with intervals of 10mm; 2. 70 is the aspect ratio, which is the ratio of the tire sidewall height to the tire section width; 3. 70 represents 70%. Generally, tire aspect ratios range between 30%—80%. 4. Under normal circumstances, ordinary cars should not use tires with an aspect ratio >75%, while luxury cars and high-performance sports cars are recommended to use tires with an aspect ratio <60%; 5. R is the abbreviation for Radial, indicating the tire has a radial structure, and 15 is the rim diameter, the unit is inches.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.