What is the appropriate tire pressure for the Elantra?

1 Answers
EstherRose
07/30/25 9:46am
The appropriate tire pressure for the Elantra is between 2.3 and 2.5 bar. Tire pressure refers to the air pressure inside the tires. The Elantra is a compact sedan produced by Beijing Hyundai. Taking the 2020 Elantra Manual Smart Style model as an example, its body dimensions are: length 4610 mm, width 1800 mm, height 1450 mm, with a wheelbase of 2700 mm. The 2020 Elantra Manual Smart Style model is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 115 hp, with a maximum power speed of 6300 rpm and a maximum torque speed of 4500 rpm. It features a MacPherson strut front suspension and a torsion beam non-independent rear suspension.
Was this review help?
2
5
Share
More Forum Discussions

Which country does DS belong to?

DS is a premium vehicle series under the French PSA Group (Peugeot Citroën), with models including DS 4S, DS 5LS, DS 5, DS 6, and DS 4S. Taking the 2021 DS 7 as an example, its body dimensions are: length 4603mm, width 1891mm, height 1626mm, wheelbase 2740mm, fuel tank capacity 60L, and luggage compartment capacity 550L. The 2021 DS 7 is equipped with a 1.6T turbocharged engine, delivering a maximum power of 133kW and a maximum torque of 250Nm, paired with an 8-speed automatic transmission.
14
3
Share

Does a front-end collision qualify as a major accident vehicle?

Front-end collision damage qualifies as a major accident vehicle. Here are relevant details about accident vehicles: 1. Definition of an accident vehicle: First observe whether the gaps between body panels are uniform and consistent, then check if the side body lines flow smoothly. If noticeable misalignment is found in the waistline, it can be concluded that the vehicle has experienced a collision, and a relatively severe one at that. 2. Hazards of accident vehicles: Vehicles involved in major accidents typically leave traces on the frame that are difficult to fully repair; once a major accident vehicle is flooded, the electrical circuits and components will suffer very serious damage.
6
5
Share

How to Repair Rusted Car Doors?

Car door rust repair method is: first spray with rust remover, then sand and repaint. There are many reasons for car door rust, which may be caused by substandard steel plate quality, blocked drainage holes, or damaged paint that was not repaired in time. The car's paint consists of four layers, from the inside out: the electrophoretic layer, the intermediate coat, the color coat, and the clear coat. After the entire body is assembled, robots immerse the body in an electrophoretic tank, forming an electrophoretic layer on the surface, which serves to prevent rust.
13
1
Share

What is the range of the Trumpchi GE3?

The range of the Trumpchi GE3 is 410 kilometers. The Trumpchi GE3 is a pure electric vehicle. This model is a single-motor variant, with the motor delivering a maximum power of 132 kilowatts and a maximum torque of 290 Newton-meters, providing relatively strong performance. The motor of the Trumpchi GE3 is front-mounted, making this model front-wheel drive. The Trumpchi GE3 uses a ternary lithium-ion battery, which is commonly used in most pure electric vehicles due to its lower energy density and lighter weight. The front suspension of the Trumpchi GE3 employs a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension.
12
4
Share

What Causes the Abnormal Sound When Turning the Steering Wheel in Place?

The reasons for abnormal sounds when turning the steering wheel in place are as follows: 1. Noise from the shock absorber plane bearing: If a sound is produced when lightly shaking the steering wheel in place, it is likely due to insufficient lubrication in the shock absorber's plane bearing. 2. Noise from the stabilizer bar: If the abnormal sound comes from below the steering wheel, it might be caused by the dust cover of the steering column. Lack of lubrication in the steering column dust cover can lead to friction sounds. 3. Noise from inside the steering wheel: If the abnormal sound originates from inside the steering wheel, the issue is most likely due to the steering wheel's clock spring (airbag coil).
11
3
Share

What is the function of the Tiida sensor?

The function of the Tiida sensor is to convert various operating condition information during vehicle operation into electrical signals and transmit them to the computer, ensuring the car maintains optimal working conditions. Automotive sensors can be classified by physical quantity into displacement, force, speed, temperature, flow, gas composition, etc. sensors; by working principle, they can be categorized into resistance, capacitance, inductance, voltage, Hall, photoelectric, grating, thermocouple, etc. sensors. The Tiida is a compact car, powered by a 1.6L naturally aspirated engine with a maximum power of 90kW, reaching maximum power at 6000rpm, and a maximum torque of 155Nm, paired with a 5-speed manual transmission.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.