What is the appropriate tire pressure for the Edge?

1 Answers
CaydenDella
07/29/25 12:53pm
The appropriate tire pressure for the Edge is 2.4 bar. The tire pressure value ranges from 2.4 to 2.8 bar, and as long as it falls within this range, it is safe. Generally, the tire pressure for most passenger cars is around 2.3 to 2.5 bar. Strictly speaking, tire pressure refers to the air pressure inside the tire. Tire pressure is like the blood pressure of a car, and its level has a significant impact on the car's performance and power. The Edge is a mid-size crossover SUV model under Ford, built on the Ford CD3 platform. The CD3 platform belongs to Ford's global mid-size car platform, featuring both front-wheel drive and four-wheel drive configurations. In terms of body dimensions, the Edge measures 4878 mm in length, 1925 mm in width, and 1770 mm in height, with a wheelbase of 2850 mm.
Was this review help?
7
5
Share
More Forum Discussions

What is the length of the Volkswagen Tiguan?

The length of the Volkswagen Tiguan is 4506mm, the width is 1809mm, and the height is 1685mm. Taking the 2020 Volkswagen Tiguan L as an example, it belongs to the mid-size SUV category with a wheelbase of 2791mm, a fuel tank capacity of 60 liters, and a curb weight of 1625kg. The 2020 Volkswagen Tiguan L features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 186PS, a maximum power of 137kW, and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
6
2
Share

What are the methods to deal with a car pulling to the right?

The methods to deal with a car pulling to the right are: 1. Check and adjust using a four-wheel alignment instrument; 2. Use a tire pressure gauge to check the tire pressure on both sides and inflate them to the same level; 3. Inspect the tread wear condition on both sides of the tires; 4. Use a four-wheel alignment instrument to check the wheelbase on both sides. If the wheelbase difference is too large, use a body correction instrument to restore the deformation. Reasons for a car pulling to one side while driving: 1. Uneven tire pressure on both sides; 2. Uneven tread wear on both sides of the tires; 3. Poor retraction of the brake caliper piston on one side of the vehicle; 4. Inconsistent preload of the wheel hub bearings on both sides; 5. Uneven wheelbase on both sides of the tires.
1
5
Share

How to Disassemble the Verano Key?

To disassemble the Verano car key, follow these steps: 1. At the small groove of the hook, use a flat-head screwdriver to gently pry the back side. 2. You will notice a gap appearing, then slowly widen this gap. To replace the car key battery, proceed as follows: 1. Remove the key ring, place a 1-yuan coin into a groove on the key, then twist the coin to open it and replace the CR1620 button battery. 2. Identify the positive and negative poles (positive down, negative up) and install the battery correctly. 3. Initialization: After replacing the key, initialize it to restore the remote control function.
3
5
Share

What engine does the Lynk & Co 05 have?

The Lynk & Co 05 is equipped with a 2.0L turbocharged 4-cylinder engine, featuring direct fuel injection technology and an aluminum alloy cylinder head and block. Taking the 2020 Lynk & Co 05 as an example, it belongs to the compact SUV category, with body dimensions of 4592mm in length, 1879mm in width, and 1628mm in height, along with a wheelbase of 2734mm and a curb weight of 1738kg. The 2020 Lynk & Co 05 features a MacPherson strut independent front suspension and a multi-link independent rear suspension. It is powered by a 2.0L turbocharged engine delivering a maximum horsepower of 254ps, a maximum power of 187kW, and a maximum torque of 350Nm, paired with an 8-speed automatic transmission.
8
1
Share

How to Align the Timing Chain on a Roewe 350?

To align the timing chain on a Roewe 350, follow these steps: 1. Locate the small hole blocked by a white plastic plug at the lower right corner of the engine transmission exhaust manifold. 2. Remove the plug and insert an L-shaped iron bar of the same size as the hole. 3. Insert the iron bar into the small hole on the flywheel. 4. Ensure the two round holes on the camshaft are vertically aligned upwards to lock the camshaft in place. Taking the 2015 Roewe 350 as an example, it is a compact car with body dimensions of 4521mm in length, 1788mm in width, 1492mm in height, a wheelbase of 2650mm, a fuel tank capacity of 55 liters, and a curb weight of 1290kg.
20
1
Share

What Type of Transmission Does the Buick Envision Have?

Buick Envision has two types of transmissions: the 1.5T model uses a dry 7-speed dual-clutch transmission, independently developed and produced by SAIC-GM, while the 2.0T model uses a conventional 9-speed automatic transmission. Below is some relevant information: 1. Dry Clutch: A clutch that uses air for cooling is called a dry clutch. In use, the clutch should engage and disengage smoothly and easily, and should not overheat even when operating under semi-engaged conditions for short periods. 2. Dry clutches, because they lack the resistance of oil, generally engage more quickly and with greater force. Also, since there is no oil for cooling, dry clutches are usually exposed to dissipate heat.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.