What is the appropriate tire pressure for the CT5?

Can 0w40 engine oil be used in summer?

0w40 is an all-season engine oil and can be used in summer. For 0W40 engine oil, the number after W is 40, which refers to the viscosity of the oil at 100°C, indicating that 0W40 oil has higher viscosity at high temperatures, providing better protection and making it suitable for summer use. Here are the methods to determine the suitable season for engine oil: 1. W stands for winter. The number before W represents the oil's fluidity at low temperatures. The smaller the number, the greater the fluidity of the oil. 2. The number after W refers to the viscosity index at high temperatures. The larger the number, the higher the viscosity of the oil, indicating better protective performance of the oil.

13

1

Share

What to Do When Your Driver's License Exceeds the Six-Year Validity Period?

After your driver's license exceeds the six-year validity period, you need to check the expiration time. The relevant information is as follows: 1. If it has been expired for less than one year, you can still renew it without a fine. If it has been expired for more than one year, the vehicle management office will revoke your driver's license. 2. If your revoked driver's license has not exceeded two years, you can take the Subject 1 test at the vehicle management office. Passing the test will restore your driving qualification, and then you can renew your license. If your revoked driver's license has exceeded two years, you will have to retake all the tests. Below are the relevant materials for license renewal: 1. Materials required for renewal application: (1) "Motor Vehicle Driver's License Application Form". (2) Identity proof of the motor vehicle driver. (3) Motor vehicle driver's license. (4) A medical certificate issued by a county-level or above medical institution or a military regiment-level medical institution. (5) The motor vehicle driver can authorize an agent to handle renewal, replacement, submission of medical certificates, extension, and cancellation procedures. (6) Three recent one-inch bareheaded, white-background color photos. 2. Vehicle management office procedures: (1) Undergo a physical examination at a county-level or military regiment-level medical institution. (2) Take a number at the vehicle management office, traffic police branch, or district (city) traffic police team and submit the materials at the acceptance window. (3) Pay the relevant fees at the payment window. (4) Collect the driver's license at the license and certificate window. 3. Processing time: If all requirements are met and the procedures are complete, it will be processed on the spot. 4. Processing unit: The vehicle management office of the traffic management department of the public security authority where the motor vehicle driver's license was issued.

5

1

Share

How to Test the Condition of a Car Battery?

Here are several methods to test the condition of a car battery: 1. Perform a starting test on the car or electric vehicle: Use the car key to start the engine. If the key fails to start the car after insertion, and the vehicle has not been left unused or discharged for an extended period, it can be preliminarily judged that the battery is severely aged and needs replacement. 2. Conduct a discharge test on the car: After driving the car normally for a while, if it will not be used for some time, turn the key to the circuit-on position and then turn on the headlights. If the headlights go out within a day or two, it can be determined that the battery is aging. 3. Observe the sound level of in-car electronic devices like the radio during the starting process: If the sound fluctuates between loud and soft, it indicates unstable battery output. 4. Check for white crystalline deposits on the two electrodes of the battery: If there are many deposits, it indicates severe battery sulfation, and replacement is needed. 5. Check the production date and specifications on the battery cover: If the production date is ten years or older, replacement is recommended. 6. Test the battery voltage under no-load conditions: Use a multimeter to measure the battery voltage under no-load conditions. The voltage should be 12V and very stable. If the voltage is too low or fluctuates, it indicates battery aging. 7. Monitor the voltage indicator: Connect the multimeter to the battery's positive and negative terminals, start the car, and turn on the air conditioning. If the voltage drops significantly, it indicates battery aging.

9

0

Share

What are the reasons for a car suddenly stalling while driving?

There are several reasons why a car may suddenly stall while driving: 1. Electrical circuit failure: Stalling due to low-voltage power interruption during driving, mainly check the ignition and starter switches as well as the fuse box. 2. Stalling caused by a short circuit in the low-voltage line. 3. Component failure: Usually, issues with the ignition coil, capacitor, or electronic ignition module. 4. Fuel system failure: Damage to the fuel pump, fuel pipe rupture, clogged carburetor fuel inlet, or an empty fuel tank can all cause sudden stalling. 5. Ignition system problems or issues with the engine overheating anti-explosion system. 6. Driver's lack of proficiency leading to stalling, especially improper coordination between the throttle and clutch in manual transmission cars.

20

5

Share

Is It Normal for a Car to Shake Violently at the Moment of Ignition?

The reason for a slight shake at the moment of ignition is the cold start of the vehicle, which can sometimes cause minor vibrations. As long as the shaking is not too severe and does not last long, it is considered normal. However, persistent shaking is abnormal. Here are the general reasons for car ignition shaking: 1. Incomplete combustion of gasoline in the engine, resulting in insufficient power, or a stuck or clogged fuel injector. Most engine shaking is caused by insufficient fuel supply due to clogged or stuck fuel injectors, leading to power loss. 2. Aging spark plugs due to prolonged use can cause the electrode gap to widen, leading to insufficient ignition energy and poor gasoline atomization. Additionally, many modern cars have three- or four-cylinder engines, each with a spark plug. These spark plugs can also develop widened gaps, causing power differences between cylinders and resulting in vehicle shaking. 3. Excessive carbon buildup in the engine's intake manifold and valves, which may be caused by a dirty throttle body or too much carbon buildup in the fuel injectors and intake passages. During a cold start, carbon deposits can absorb some fuel, preventing it from fully entering the combustion chamber. This leads to unstable idling, and during a cold start, carbon deposits may absorb some gasoline, causing the air-fuel mixture in the engine cylinders to become too lean, resulting in engine shaking and difficulty starting.

17

1

Share

How to Test Engine Oil with Qualitative Filter Paper?

Use the oil dipstick to place 1-2 drops of engine oil in the center of the qualitative filter paper. Place the filter paper with oil drops on a flat surface, ensuring the back of the paper does not touch any object to avoid affecting the oil diffusion. Let it stand at room temperature for 0.5-1 hour, then observe the spot pattern. Additional information: 1. The purpose of the filter paper spot test method is to determine the clean dispersing performance of lubricating oil containing detergent-dispersant by observing its diffusion into spots on the filter paper. 2. The standard categorizes spot patterns into four grades. (1) Grade 1: The deposit ring and diffusion ring of the oil spot have no clear boundary; the entire spot is uniform in color, with a light and bright oil ring, indicating good oil quality. (2) Grade 1-2: The deposit ring of the oil spot is dark in color, the diffusion ring is relatively wide, and there is a clear boundary between the two rings. The oil ring appears in varying shades of yellow, indicating the oil is prone to contamination. Oil filtration should be enhanced, but the lubricating oil can still be used. (3) Grade 2-3: The deposit ring is dark black with dense deposits, the diffusion ring is narrow, and the oil ring darkens, indicating the oil quality has deteriorated. (4) Grade 3-4: The oil spot only has a central deposit ring and an oil ring, with no diffusion ring. The deposit ring is pitch black and thick, not drying easily.

4

1

Share

What is the appropriate tire pressure for the CT5?

Can 0w40 engine oil be used in summer?

What to Do When Your Driver's License Exceeds the Six-Year Validity Period?

How to Test the Condition of a Car Battery?

What are the reasons for a car suddenly stalling while driving?

Is It Normal for a Car to Shake Violently at the Moment of Ignition?

How to Test Engine Oil with Qualitative Filter Paper?

What Causes the ABS Light to Illuminate When It Rains?

What Are the Causes of Car Air Conditioning Not Cooling?

What are the license plate codes for various regions in Fujian?

What are the drawbacks of replacing 185 tires with 195 tires?