What is the appropriate tire pressure for the Baojun 730?

2 Answers
GabrielRose
07/24/25 6:42am
The recommended tire pressure for the Baojun 730 is around 2.3-2.5 bar. Below is an introduction to the Baojun 730: Powertrain: It features a "1.5T turbocharged engine + simulated 8-speed CVT transmission" combination. The engine has a rated power of 111 kW and a maximum net torque of 250 N·m. The turbo engages at around 1000 rpm and reaches the maximum torque of mainstream 2.4L naturally aspirated engines at 1600 rpm. Features: It comes standard with an 8-inch floating central multimedia screen, while higher-end models offer a 7-inch full LCD instrument panel. The vehicle is equipped with Car-play, SSP-LINK connectivity platform, and other functions, supporting both Android and Apple systems.
Was this review help?
18
0
Share
Gretchen
08/11/25 2:27am
When it comes to the tire pressure of the Baojun 730, I think maintaining it around 2.3 to 2.5 bar is generally the most suitable. Having driven this model for several years, I make it a habit to check the tire pressure during every maintenance. Too high tire pressure can lead to uneven tire wear and a bumpy ride on long trips, affecting comfort; while too low pressure increases fuel consumption and may even cause a blowout, especially at high speeds. The best practice is to check the tire pressure when the car is cold, such as before driving in the morning, referring to the label on the door frame or the recommended values in the owner's manual. I would remind everyone to check the tire pressure at least once a month—it's simple with a tire pressure gauge—and don't forget that some models may have slightly different pressures for the front and rear tires. This small habit not only saves fuel but also extends tire life and ensures driving safety. Personally, I never overlook this detail.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

How to Pass the Reverse Parking Test in Subject 2?

Reverse parking is judged based on the following criteria: failure to follow the prescribed route or sequence results in disqualification. Other disqualifying factors include the vehicle body crossing the line, failure to park properly, or stopping midway. If the reverse parking is not completed within 210 seconds, it also results in disqualification. Violating any of these standards will result in a direct deduction of 100 points, leading to failure in the Subject 2 test. Below are the practice steps for reverse parking: Preparation Phase: Drive the vehicle to the designated test area. The key reference point is when the front wheels of the vehicle cross the control line. Reversing: After crossing the control line, stop the vehicle, shift into reverse gear, and begin reversing. Control the speed to ensure the vehicle moves slowly. Observe the lower edge of the left rearview mirror. When the lower edge of the left rearview mirror intersects with the sensing line, quickly turn the steering wheel fully to the right. Parallel Parking: With the steering wheel fully turned, observe the right rearview mirror. You will first see the left corner of the parking space. Continue reversing until the right corner of the parking space and the right wheel are 30 cm apart. Keep the steering wheel steady and continue reversing. Stopping: After observing the distance between the rear wheel and the corner of the parking space and determining if any adjustments are needed, observe the timing when the vehicle body becomes parallel to the parking space lines. Once the vehicle body is parallel to the lines, quickly straighten the steering wheel to allow the vehicle to drive straight into the parking space. Ensure the left and right distances are equal after the vehicle is parked. Keep the steering wheel steady and continue reversing. Observe the left rearview mirror, and when the lower edge of the left rearview mirror is parallel to the boundary line, quickly press the brake to stop. Exiting the Parking Space: The entire reverse parking process includes exiting the parking space. When exiting, maintain a steady speed and drive straight forward. When the vehicle's hood is parallel to the boundary line, quickly turn the steering wheel fully to the left. Wait until the vehicle crosses the stop line, then proceed with left-side parking, following the same steps and methods as the right-side parking described above.
4
1
Share

What are the differences between the Kove 500f Wild Edition and the Scrambler Edition?

Here are the specific differences between the Kove 500f Wild Edition and the Scrambler Edition: 1. Style orientation: The Wild Edition is the most aggressive, while the Scrambler Edition balances aggression and comfort. 2. Performance configuration: The Wild Edition adopts the highest-spec suspension system and off-road-oriented riding parameters for stronger off-road capability, including a fully adjustable 200mm travel KYB front fork, 210mm ground clearance, 19-inch front wheel, and professional off-road tires. The Scrambler Edition has largely similar configurations but with milder parameter settings.
7
5
Share

What Does Audi's Halt in Internal Combustion Engine Development Mean?

Audi's cessation of internal combustion engine development signifies the end of the era of fuel engines, ushering in the age of electric motors. Below are the differences between imported and domestically produced Audi models: 1. Wheel size: Imported Audi models come with 20-inch wheels; domestically produced models are equipped with 17-inch and 19-inch wheels. 2. Wheelbase: The wheelbase of imported Audi models is 2800mm; domestically produced models have a wheelbase of 2733mm. 3. Grille design: The grille and front fog lights of imported Audi models are chrome-plated; domestically produced models do not feature chrome plating on the grille and front fog lights.
8
4
Share

What are the differences between National V and National VI vehicles?

Differences between National V and National VI vehicles: 1. Different emission standards: National V vehicles reduce nitrogen oxide emissions by 25% and particulate matter emissions by 20%; National VI vehicles reduce nitrogen oxide emissions by 77% and particulate matter by 67%. 2. Different fault classification levels: National V vehicles have a single-level fault classification; National VI vehicles have a four-level fault classification. There is no fundamental difference in the engines between National V and National VI models, whether in terms of power, performance, or combustion ratio. The difference in emission standards is due to an additional three-way catalytic converter purification device installed at the exhaust position of the vehicle.
19
1
Share

What to Do If Your Vehicle License Plate is Cloned?

If your vehicle license plate is cloned, here are the solutions: 1. Gather evidence: Once you confirm that your plate has been cloned, promptly start collecting all favorable evidence, including photos of your vehicle's appearance, various parking receipts, highway toll receipts, dashcam footage, and even surveillance videos from parking lots or residential areas. 2. File a complaint: After gathering the above evidence, you can submit a complaint to the traffic management department regarding the cloned plate. You may choose to file the complaint either with the traffic management department where your vehicle is registered or at the location where the violation occurred. If the complaint is successful, the traffic management department will issue a statement confirming the plate cloning. With this statement, you can apply to the vehicle management office for a new license plate.
15
3
Share

Where is Li Auto manufactured?

Li Auto vehicles are manufactured at the Changzhou production plant. Here is some relevant information: Taking the Li ONE as an example: It is a mid-to-large-sized SUV with body dimensions of 5020mm in length, 1960mm in width, and 1760mm in height, a wheelbase of 2935mm, a ground clearance of 180mm, a fuel tank capacity of 45 liters, and a curb weight of 2300kg. Configuration: The Li ONE is equipped with an extended-range electric motor and a single-speed fixed gear ratio transmission, delivering a maximum power of 240 kW and a maximum torque of 530 N·m. Its front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.