What is the appropriate tire pressure for Pajero?

1 Answers
VanEmersyn
07/30/25 10:12am
The recommended tire pressure for Pajero is between 2.1 to 2.5 bar. The specific tire pressure can be found on the vehicle's tire pressure range label located in the user manual or near the driver's side door B-pillar. Taking the 2020 Pajero as an example, it belongs to the mid-to-large SUV category with body dimensions of: length 4900mm, width 1875mm, height 1900mm, wheelbase 2780mm, and fuel tank capacity of 88 liters. The 2020 Pajero is equipped with a 3.0L naturally aspirated engine, delivering a maximum horsepower of 174PS, maximum power of 128kW, and maximum torque of 255Nm.
Was this review help?
20
4
Share
More Forum Discussions

Why Accelerate Before Upshifting and Decelerate Before Downshifting?

Accelerating before upshifting ensures sufficient power output during acceleration. Directly downshifting while decelerating can cause a sudden increase in engine RPM, and engaging a lower gear at high speeds may lead to gear grinding, accelerating transmission wear. Additional Information: 1. Content One: After completing a turn, you should upshift as soon as possible to restore the car to normal speed and prevent rear-end collisions. With practice, you can slightly accelerate when turning in a manual transmission car for greater comfort. This is because the acceleration-induced thrust can slightly reduce the discomfort caused by centrifugal force, and downshifting before a turn allows for quicker power response in case of emergencies. 2. Content Two: Maintain an appropriate distance from the car in front when turning. If you find the speed too fast, press the clutch and then brake. When the vehicle speed is about 20 km/h, shift to first gear. When releasing the clutch, do it slowly to avoid a sudden drop in RPM, which can cause severe jerking.
8
0
Share

Where is the drainage hole of the Magotan car door?

Magotan car door drainage holes are located at the lower part of the door. Below is a detailed introduction about car drainage holes: 1. The drainage holes of Magotan car doors are located at the lower part of the door, and the two holes on the inner edge of the door outer panel are the drainage holes. During the use of the car, the owner should regularly check the drainage holes to ensure they are clear and avoid clogging. 2. According to their distribution locations, the drainage holes on a car can be divided into door drainage holes, sunroof drainage holes, air conditioning drainage holes, fuel filler drainage holes, and drainage holes at the lower part of the front windshield. 3. Door drainage holes: The car door glass is tightly connected with the sealing rubber strip, but more or less water will still flow into the door through the gap between the sealing strip and the glass during rain. These accumulated water inside the door will be discharged through the drainage holes at the lower part of the door.
1
5
Share

How long does it usually take for the review of Subject 2 training hours?

Subject 2 training hours review takes approximately 15 days. Here is relevant information: 1. New regulations: According to the new "Motor Vehicle Driver Training Teaching and Examination Outline", the required training hours for each subject of C1 license are: Subject 1 (12 hours), Subject 2 (26 hours, including 2 theoretical hours), Subject 3 (40 hours, including 16 theoretical hours). Among them, the practical training hours for Subject 2 (five compulsory tests) and Subject 3 (long-distance and road tests) are both 24 hours, accounting for the majority of the total 78 training hours. For C1 license, 24 training hours must be completed for Subject 2 before taking the exam. 2. Subject 2: Also known as the small road test, it is part of the motor vehicle driver's license assessment and refers to the field driving skill test. The test items include five compulsory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve.
17
4
Share

What are the differences between BMW 330 and BMW 320?

The differences between BMW 330 and BMW 320 are as follows: 1. Different piston heads. 2. Different cylinder head bolts. 3. Different ECUs. 4. Different drive shafts. 5. Different half shafts. 6. Different rear axle differentials. 7. Different exhaust pipes. 8. Different wheel and tire sizes (same for iM models), with the 320 featuring 17-inch wheels and the 330 equipped with 18-inch 400M wheels, front 225/45R18 and rear 255/40R18. 9. The 320 is currently the lowest-priced imported 3 Series family sports sedan with a 0-100 km/h acceleration time of 7.6 seconds, available in Fashion and Sport Design Package versions, differing mainly in practical configurations. The 330 comes with M3 package components, is a standard 3 Series model with a 0-100 km/h acceleration time of 6.1 seconds, and the key differences lie in the M-grade package components, as well as the availability of a hybrid version in the 3 Series lineup.
7
4
Share

What Causes Abnormal Idle Vibration When the Car Air Conditioner is On?

Here is a detailed analysis of the specific reasons for abnormal idle vibration when the car air conditioner is on: 1. Severe engine carbon buildup: The most common cause of vibration is a dirty throttle body or excessive carbon deposits in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold-start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts, making it difficult to start. The solution is to clean the fuel system and check if the idle control valve has carbon buildup, which should be cleaned. 2. Unstable fuel pressure: Check whether the fuel supply pressure and the intake pressure sensor are functioning properly. If the fuel pump supply pressure is abnormal or the intake pressure sensor values are incorrect or malfunctioning, it can cause body vibration. The solution is to check the fuel pressure and replace components if necessary. 3. Aging engine components: Car vibration is also related to worn engine mounts. Engine mounts are essentially the shock absorption system of the engine, responsible for absorbing minor vibrations during engine operation.
16
1
Share

What is the engine model of the Soueast A5 Yiwu?

The engine model of the Soueast A5 Yiwu is the 4A91, a 1.5L naturally aspirated engine. An engine is a machine capable of converting other forms of energy into mechanical energy, which can be used either as a power generation device or refer to the entire machine including the power unit. The Soueast A5 Yiwu's engine has a maximum power of 88 kW and a maximum horsepower of 120 hp, paired with either a 5MT or CVT continuously variable transmission, meeting the China VI emission standards. The dimensions of the Soueast A5 Yiwu are 4588mm in length, 1780mm in width, and 1485mm in height, with a wheelbase of 2625mm. It comes equipped with features such as driver's seat belt reminder, brake force distribution, ABS anti-lock braking system, child seat anchors, and rear radar.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.