What is the appropriate tire pressure for Neta V?

2 Answers
JamesMarie
07/24/25 4:04am
Neta V's appropriate tire pressure is 2.4-2.5 bar, according to the stipulations and requirements of the international GBT2978-2008 standard, the standard tire pressure is 2.4-2.5 bar. Factors to consider when adjusting tire pressure: Seasonal factors: In winter, it is appropriate to slightly increase the standard tire pressure by about 0.2 bar. In summer, follow the lower limit of the standard tire pressure. If the car is parked outdoors in summer, the pressure can generally be about 0.1 bar lower than the standard to prevent high-temperature blowouts. Load factors: For empty or half-loaded conditions, follow the lower limit of the standard tire pressure (the tire pressure indicated on the vehicle's sticker can be used as a reference for the minimum tire pressure). For full load, follow the upper limit of the standard tire pressure (the maximum tire pressure indicated on the tire can be used as a reference for the theoretical maximum tire pressure). Tire pressure measurement environment: The tire pressure of cold tires and hot tires is different, so attention should be paid during measurement. The difference between the two is about 0.3 bar. Road conditions: On rough roads, it is appropriate to slightly decrease the standard tire pressure by 0.1-0.2 bar. For long-distance high-speed driving, the tire pressure should not be too low; it is appropriate to slightly increase the standard tire pressure by about 0.2 bar based on the lower limit.
Was this review help?
18
4
Share
SanKai
08/10/25 11:39pm
Regarding the tire pressure of NETA V, I remember seeing a label on the door B-pillar when I last drove this car, recommending maintaining around 2.3-2.5 bar when the tires are cold as the most suitable. I often drive long distances and have noticed that too low tire pressure can easily lead to blowouts and increased fuel consumption, while too high pressure affects comfort and grip. Especially for electric vehicles, which are heavier, you should add about 0.2 bar when carrying more passengers. In summer, when it's hot, the tire pressure rises, so you need to release some air; in winter, when it's cold, you should add some air. Check the tire pressure every two weeks with a tire pressure gauge. If the car is equipped with a monitoring system, it's more convenient to check it on the dashboard. I also keep a handheld inflator in the trunk to ensure stable tire pressure, which is both safe and cost-effective.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

How to Turn Off the Auto Start-Stop Function on the New X-Trail?

The method to turn off the auto start-stop function on the new X-Trail is: The auto start-stop function button is located on the driver's side of the center console, which is a mechanical button. To turn it off, simply press the corresponding button. The new X-Trail is a compact 5-door, 5-seat SUV under Dongfeng Nissan, with a body length, width, and height of 4675mm, 1820mm, and 1722mm respectively, a wheelbase of 2706mm, and a top speed of 183 kilometers per hour. The new X-Trail is equipped with a 2.0L L4 naturally aspirated engine, with a maximum torque of 194 Nm and a maximum horsepower of 151 hp, paired with a CVT continuously variable transmission.
13
1
Share

Is the Tacqua from FAW-Volkswagen or SAIC Volkswagen?

The Tacqua is from FAW-Volkswagen. The Tacqua is a compact 5-door, 5-seater SUV with body dimensions of 4194mm in length, 1760mm in width, and 1601mm in height, and a wheelbase of 2651mm. It is equipped with a 5-speed manual transmission and features such as tire pressure monitoring, front seatbelt reminder, traction control, brake assist, child seat anchors, engine immobilizer, and central locking. The Tacqua's tire specifications are 205/60R16, with a MacPherson strut front suspension and a torsion beam rear suspension. It has a fuel tank capacity of 40L and a top speed of 185 km/h.
17
5
Share

How to adjust the headlights of Baojun 730?

Baojun 730 headlights adjustment method is: The light adjustment button is on the lever on the left side of the steering wheel, allowing selective switching of lights. When the light switch is in the AUTO position, the parking lights and headlights will automatically turn on or off based on the brightness of the outdoor light. Even during the operation of the automatic light function, it is necessary to manually turn on the lights when driving at night or in foggy weather, or when entering dark areas such as tunnels and parking lots. The Baojun 730 is a 5-door, 7-seater MPV under SAIC-GM-Wuling, with dimensions of 4780mm in length, 1780mm in width, and 1740mm in height, a wheelbase of 2750mm, and is equipped with a 6-speed manual transmission.
6
3
Share

Where is the radiator cap located on a Prado?

Prado radiator cap is located on the radiator. You can open the hood and locate the radiator when the engine has completely cooled down. There is usually a filler expansion tank (attached reservoir) or a cap marked with coolant filling instructions. Opening this cap allows you to add water. The car radiator generally refers to the automobile heat exchanger, which is part of the vehicle's cooling system. The radiator in the engine's water cooling system consists of three parts: the inlet chamber, outlet chamber, main plate, and radiator core. The Prado is a mid-to-large 5-door 7-seat SUV produced by FAW Toyota, with dimensions of 4840mm in length, 1885mm in width, and 1890mm in height, featuring a wheelbase of 2790mm and equipped with a 6-speed automatic transmission.
5
1
Share

Can the old annual inspection sticker be removed?

Can the old annual inspection sticker be removed? The old annual inspection sticker can be removed, provided that the new annual inspection sticker has already been obtained. The annual inspection sticker is a label issued after the vehicle passes the annual safety inspection based on the technical requirements for motor vehicle operation. For new vehicles, the annual inspection sticker can be printed at the vehicle management office when the license plate is issued. For private cars older than six years, the annual inspection sticker must be obtained annually after passing the inspection at a vehicle inspection center. Methods to avoid leaving adhesive residue when removing the old annual inspection sticker: 1. Place a towel on the dashboard, then spray adhesive remover directly onto the annual inspection sticker, ensuring the entire sticker is soaked. Let it sit for two minutes, then peel off the sticker by hand and wipe away any remaining adhesive with the towel; 2. Use a hairdryer to evenly heat the entire annual inspection sticker, then slowly peel it off by hand while continuing to apply heat during the removal process.
6
3
Share

How to Maintain a Turbocharged Engine?

Turbocharged engine maintenance methods: 1. Avoid driving without warming up the engine. After starting the engine, let it idle for a while to allow the lubricating oil to fully lubricate the bearings before the turbocharger rotor operates at high speed; 2. Do not shut down the engine immediately. After prolonged high-speed operation, let the engine idle for three to five minutes before turning it off. Sudden shutdown in a hot engine state can cause the retained oil in the turbocharger to overheat, damaging the bearings and shaft; 3. Keep it clean. Regularly clean the air filter to prevent dust and other impurities from entering the high-speed rotating compressor impeller, which can cause unstable speed or accelerated wear of the shaft sleeve and seals.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.