What is the appropriate tire pressure for GLC?

1 Answers
LeKylie
07/29/25 10:51pm
GLC tire pressure should be between 2.3 and 2.5 for both front and rear tires. How to handle when the tire pressure warning light comes on: First, pull over to the side of the road and check the tire pressure of all four tires. If no obvious loss of air pressure is visible, you can reset the tire pressure monitoring system after getting back in the car to turn off the warning light. If the tire pressure warning light comes on again, it indicates that there is indeed an issue with the tire pressure of one of the tires, and it needs to be inspected and repaired promptly. Standard tire pressure range: Generally, different vehicle models have slight variations in the factory-specified tire pressure. Taking household cars as an example, under normal circumstances, the tire pressure should be maintained within the range of 2.2 to 2.6.
Was this review help?
18
0
Share
More Forum Discussions

Reasons for Crossing the Right Line in Curve Driving

Lack of vehicle sense and incorrect judgment of the vehicle's movement trend lead to crossing the line. Below is a related introduction about curve driving: 1. Overview: Curve driving is a test point in Subject 2 of the driver's examination, commonly known as the S-curve. The test requires the vehicle to drive on an S-shaped road of specified width without pressing the edge lines, with smooth and flexible steering. 2. Purpose: It assesses the driver's ability to control the steering and maneuver the vehicle through curves. The goal is to develop the driver's skill in steering application and mastering the wheel trajectory.
14
0
Share

Is the BMW 1 Series a Three-Cylinder?

The BMW 1 Series is available in both three-cylinder and four-cylinder versions, with the imported 1 Series also offering a six-cylinder variant. The domestic version currently features a three-cylinder engine and is front-wheel drive. The advantages of the three-cylinder engine include the following: 1. Low fuel consumption. Due to its structural advantages, the three-cylinder engine excels in fuel efficiency. 2. Strong power output. Within the 1.0L-1.5L displacement range, the three-cylinder engine has larger single-cylinder volume compared to a four-cylinder engine of the same displacement, resulting in better low-speed performance. Fewer cylinders mean less mechanical friction, and increasing the number of cylinders can reduce single-cylinder efficiency. The three-cylinder engine offers faster power response and stronger performance compared to a four-cylinder engine. 3. Lower turbo lag. The three-cylinder engine has less exhaust interference than a four-cylinder engine, and when paired with small-inertia turbo technology, it delivers better low-end torque and reduced turbo lag. 4. Compact size and lightweight. The three-cylinder engine is smaller and lighter, reducing overall vehicle weight and saving space in the engine compartment, which can be allocated to electrification components. 5. Suitable for hybrid models. On one hand, hybrid systems are bulky, and the compact size of the three-cylinder engine is more compatible with hybrid systems. On the other hand, the three-cylinder engine is more efficient.
3
5
Share

When was the 2018 Sagitar discontinued?

The 2018 Sagitar is still currently on sale, with prices ranging from over 90,000 to around 120,000 yuan, and there has been no discontinuation notice yet. Below is additional information about the 2018 Sagitar: 1. The 2018 Sagitar 1.4T comes in four configurations: Comfort, Luxury, R-LINE, and Flagship, all equipped with a 1.4T high-power engine. Among these, the Comfort and Luxury models are the most popular. 2. The Sagitar is configured with a 1.4T engine, delivering 150 horsepower and 250 Nm of torque, paired with a 7-speed dual-clutch transmission. It has a wheelbase of 2651 mm, a minimum ground clearance of 113 mm, and a curb weight of 1.395 tons. 3. It features an EA211 turbocharged direct-injection engine and front and rear independent suspension. The all-aluminum engine comes with electric power steering. 4. Standard features include four airbags, optional head airbags, tire pressure monitoring, ESP stability control system, front and rear parking radar for the Luxury model (only rear parking radar for the Comfort model), cruise control, hill-start assist, engine start-stop, sunroof, keyless entry, keyless start, trip computer, leather steering wheel with tilt and telescopic adjustment, and a multifunction steering wheel.
4
2
Share

What are the reasons why the sunroof of MG ZS cannot be closed?

Here are the reasons why the sunroof of MG ZS cannot be closed: 1. Leaves, dust, or other foreign objects in the sunroof track causing blockage. 2. Sunroof circuit failure or damage to the sunroof motor. 3. Severe lack of lubricant in the sunroof slideway, causing the sealing strip to stick to the car body. Below are extended precautions for using the sunroof: 1. Do not fully open the sunroof on bumpy roads, as the vibration between the sunroof and the slideway may cause deformation of related components or even damage the motor. 2. Before opening the sunroof, open the partition first to avoid overloading the sunroof motor and causing malfunctions. 3. After rain or snow, the sunroof is prone to freezing, and the sealing strip may become frozen and hard. Turn on the heater first and wait for the ice on the sunroof to melt before opening it. 4. When washing the car with a high-pressure water gun, do not aim the water jet directly at the sealing ring. 5. There are four drainage channels at the four corners of the sunroof to drain water out of the car. If the drainage channels are blocked or the water volume exceeds the design capacity of the channels, water may overflow, leading to roof leakage or even severe water seepage. Since the sunroof components are sliding parts, they are relatively prone to water penetration and aging. Regularly clean the drainage outlets.
12
4
Share

Reasons for Car Coolant Leakage?

Coolant radiator (water tank) damage, heater core damage, aging coolant hose connections or damaged/loose hose clamps, etc. Below is relevant information about coolant: 1. Replacement cycle: Antifreeze typically needs replacement every two years or 40,000 kilometers. Of course, this isn't absolute. The actual situation should determine the timing, as running tens of thousands of kilometers or over a year without major issues is possible. Additionally, it's important to note that different antifreeze types should not be mixed. 2. Reduction reasons: Long-term exposure to high temperatures may cause a slight drop in fluid level, which is normal. Secondly, there might be leakage issues requiring inspection by maintenance personnel.
4
1
Share

What does PDL mean in cars?

PDL in cars refers to the pre-delivery inspection record of a vehicle. Here is some extended information: 1. PDL inspection: It is a pre-delivery inspection certification that must be passed before a new car is handed over to the customer. New cars travel thousands of kilometers from the factory to the dealership and are stored for long periods. To ensure the safety and original performance of the new car for customers, PDL inspection is essential. 2. PDL inspection items: The scope of PDL inspection is very wide, including whether the battery is charging and discharging normally, whether the key memory function is matched, whether the comfort system is activated, whether the instrument lighting functions are set to the original factory requirements, etc.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.